Palladium-catalyzed amination of aryl halides on solid support

[reaction: see text] The first examples of the Pd(0)-catalyzed amination of aryl halides using Rink-resins as nitrogen source are described. Pd(2)dba(3)/BINAP/NaO-t-Bu was found to be the most efficient catalyst/base system, while a solvent mixture of dioxane and tert-butyl alcohol was shown to enhance the selectivity toward the desired monoarylation. Moderate to good yields and excellent purities of the amination products were found with electron-poor aryl halides, while electon-rich aryl halides failed to react under these conditions.     

Determination of carbonate in marine solid samples by FTIR-ATR spectroscopy

A method for detecting carbonate in marine solid samples (sediments, corals) by Fourier transform infrared spectroscopy (FTIR) coupled to the total attenuated reflectance (ATR) technique is described. Compared to other techniques, the proposed method is not based on the measurement of CO2 evolved by combustion or acidification of the sample, but on the direct measurement of carbonate present in the sample. For this reason, the method by FTIR-ATR spectroscopy does not require any chemical pre-treatment. The proposed method allows determination of carbonate in the range 6-100% (w/w) as Na2CO3 and gives comparable results with the determination of inorganic carbon by elemental analysis.     

The signal-to-noise ratio as the measure for the quantification of lysophospholipids by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry

The subject of this report is the determination of lysophospholipids; lysophosphatidylcholine, lysophosphatidylethanolamine, lysophosphatidylserine and lysophosphatidic acid, by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF MS). The mean signal-to-noise ratio (S/N) was used for the first time as a measure of lysophospholipid concentration. Two different sample preparation procedures were applied, the 'standard' procedure and the 'premix' in order to check to what extent these methods influence the results of the lysophospholipid quantification. Results can be summarised as follows: (a) All classes of lysophospholipids can be easily and sensitively analysed by MALDI-TOF MS. The smallest detectable amount of lysophospholipids was 0.09 pmol on the sample plate. That is about two orders of magnitude lower than the amount detectable by standard chromatographic methods. (b) The mean S/N of all peaks detected in the positive ion mass spectra can be used as a measure of the lysophospholipid concentration. Whereas the S/N for neutral lysophospholipids correlated with the applied concentrations only when the samples were analysed as 'premix', the sample preparation and application procedure did not influence the quantification of acidic lysophospholipids. The standard deviations were not higher than 10% of the mean value. (c) All spectra were additionally analysed in the presence of CsCl. The addition of caesium ions makes the peak identification unambiguous in phospholipid mixtures, but the Cs adducts of lysophospholipids do not properly reflect their concentration and, therefore, they were not useful for quantification. (d) The applicability of the method was demonstrated on the organic extract of human neutrophils.     

The Influence of pH and Temperature on the Equilibrium and Dynamic Surface Tension of Aqueous Solutions of Sodium Oleate

For aqueous solutions of sodium oleate, the dynamic surface tension (using the maximum bubble pressure technique) and the equilibrium surface tensions (using the du Noüy ring method) were studied. Experiments were carried out within the pH range 7 to 13 and at temperatures from 20 to 60 degrees C. From the equilibrium surface tension studies at 25 degrees C, a wide variation in surface activity was found to occur in the premicellar concentration range, depending on pH and oleate concentration, and this was explained on the basis of the formation of strongly surface-active premicellar species. It was also shown that the critical micelle concentration (cmc) of the system increased with pH within the pH range 7-12. Dynamic surface tension experiments were carried out from 20 to 60 degrees C at concentrations beyond the cmc in alkaline solutions, and the adsorption kinetics at the air/solution interface were analyzed using established theoretical diffusion models. From these data, the effective diffusion coefficients (D(eff)) for the oleate species were determined and the presence of an interfacial activation barrier in the diffusion process was confirmed. It was found that the D(eff) values obtained within the temperature range from 40 to 60 degrees C at 2-3 mM were in general agreement with previously reported values for the oleate dimer obtained by pulse-gradient FT-NMR. Furthermore, D(eff) significantly increased with temperature and also increased with concentration at higher temperatures (>40 degrees C). Copyright 2001 Academic Press.     

Synthesis and self-aggregation of cyclic alkynes containing helicene

[structure: see text]. All stereoisomers of a cyclic alkyne containing three helicene units, 1,12-dimethylbenzo[c]phenanthrene, are synthesized using a building block. Isomeric [3 + 3]cycloalkynes aggregate in organic solvents. Vapor pressure osmometry reveals dimer formation of (M,M,M)-[3 + 3]cycloalkynes in chloroform and benzene at concentrations above 2 mM. No higher aggregation is observed. The chirality of helicenes plays an important role in self-aggregation, and diastereomeric (M,P,M)-[3 + 3]cycloalkyne forms a dimer only above 15 mM. Aggregation of racemic (M,M,M)-[3 + 3]cycloalkyne or (M,P,M)-[3 + 3]cycloalkyne is much weaker than that of a single enantiomer.     

Syntheses of halogenated ethenyl isocyanide chromium complexes as organometallic precursor molecules for ethenyl and ethynyl isocyanides

The radical alkylation of tetraethylammonium pentacarbonyl(cyano)chromate 1 yielded the halogenated ethyl isocyanide complexes [(CO)5Cr(CN-CClX-CClYF)] 3 (a, X= Cl, Y= F; b, X = F, Y= F and c, X=Y= Cl). Dehalogenation of 3 using zinc in diethyl ether gave [(CO)5Cr(CN-CX=CFY)] 4. The compounds 4a, b reacted with various nucleophiles exclusively at the difluoromethylene group. The unstable phosphorane 5, which is formed on reaction of 4b with trimethylphosphane, decomposed thermally and on hydrolysis yielding pentacarbonyl(1,2-difluoroethenyl isocyanide)chromium (6). The cyano substituent can be introduced in the beta position of the isocyanide function by reaction of 4a, b with potassium cyanide, leading to the formation of [(CO)5Cr(CN-CX=CF-CN)] (7). Reactions of 4a, b with organolithium or organomagnesium compounds yielded [(CO)5Cr(CN-CX=CF-R)] (8) and [(CO)5Cr(CN-CF=CF-C...C-CF=CF-NC)Cr(CO)5] (10). The trimethylsilyl group in 8a, b, d could be removed by a solution of potassium carbonate in methanol leading to [(CO)5Cr(CN-CX=CF-Cn-H)] (11) (n=2,4). Octacarbonyldicobalt reacted with 8e under coordination of the C-C triple bond to the hexacarbonyldicobalt fragment, resulting in the cluster compound 12. The crystal and molecular structure of 8i, 11 a, b, and 12 were elucidated by X-ray crystallography. The alkenyl and alkynyl isocyanides CN-CCl=CF2 (13a), CN-CF=CF2 (13b), CN-CCl=CClF (13c), CN-CF=CFH (14), CN-CC-H (15), CN-CC-CN (16), and CN-CCl=CF-CN (17) were obtained by flash vacuum pyrolysis of 4a, 4b, 4c, 6, and 7a, respectively.     

Conjugate addition of organocuprates to chiral bicyclic delta-lactams. Enantioselective synthesis of cis-3,4-disubstituted and 3,4,5-trisubstituted piperidines

[reaction: see text] Chiral nonracemic bicyclic lactam 3, easily accessible by cyclodehydration of (R)-phenylglycinol and racemic methyl 4-formylhexanoate, was converted to the unsaturated lactams 5, which undergo the stereoselective conjugate addition of lower order cyanocuprates to ultimately lead to enantiopure cis-3,4-disubstituted and 3,4,5-trisubstituted piperidines.     

Photochemistry and phototoxicity studies of flutamide, a phototoxic anti-cancer drug

The phototoxic anti-cancer drug flutamide is photolabile under UV-B light in either aerobic or anaerobic conditions. Irradiation of a methanol solution of this drug produces several photoproducts, one by photoreduction of the nitro group, one by rupture of the aromatic-NO2 bond of the parent compound, two as a result of the rupture of the CO-NH bond and one derived from the photoreduction product by scission of the aromatic-NH2 bond. Flutamide shows a photohemolytic effect on human erythrocytes and photoinduces lipid peroxidation. Studies on peripheral blood polymorphonuclear cells (neutrophils) demonstrated the phototoxicity of flutamide as well as inhibition of the cytotoxicity respiratory burst by the photoproduct derived from its photoreduction. The results suggest that the inhibition of the respiratory burst observed in phorbol myristate acetate (PMA)-activated cells is mediated by photosensitization and concomitant singlet oxygen production and/or formation of toxic photoproducts.     

Spectrophotometric determination of samarium(III) with chrome azurol S in the presence of cetylpyridinium chloride

A sensitive, simple method for the determination of trace amounts of samarium by spectrophotometry is described based on the formation of the samarium-chrome azurol S (CAS) complex in micellar medium. The molar absorptivities of the complexes at pH 7.5 at 505 nm were 3.6x10(4) and 1.4x10(5) l mol(-1) cm(-1) for water media and cetylpyridinium chloride (CPC), respectively. Beer's law is obeyed from 0.05-2 mg l(-1) of samarium at 505 nm as Sm-CAS-CPC complex. Optimal conditions such as reagent amounts, and pH for the samarium determination were reported. The effects of foreign ions were also investigated. The proposed method was successfully applied to the determination of samarium contents in synthetic samples.     

A new three-carbon synthon for efficient synthesis of benzannelated and 1-(2-arylethenyl) heterocycles

The novel three-carbon synthon 1-(1H-1,2, 3-benzotriazol-1-yl)-3-chloroacetone for the synthesis of benzothiazoles, pyrido[1,2-a]indoles, and styryl-substituted indolizines and imidazo[1,2-a]pyridines is reported. The proposed routes are a general and efficient approach for heterocyclizations followed by benzannelations or attachment of arylethenyl pharmacophores.