Microstructure and high-temperature wear resistance of a laser surface alloyed γ-TiAl with carbon

TiC reinforced composite coating on γ-TiAl alloy was successfully fabricated by laser surface alloying with carbon. The fine TiC reinforcing phase had a gradient distribution in the coating, and its growth morphology of TiC in laser surface alloyed coating was in unique faceted platelet-like. The composite coating exhibited high hardness and excellent high-temperature sliding wear resistance.     

一类非线性退化方程混合问题解的渐进性态

本文利用比较原理以及一种特殊变换研究了一类非线性退化方程的混合问题，得到了这类复杂问题解的渐进性质。     

Metallization of U3O8via catalytic electrochemical reduction with Li2O in LiCl molten salt

The concept of a novel electrochemical reduction process for the treatment of spent nuclear fuels in Li₂O-LiCl molten salt was proposed and fresh tests using U₃O₈ powder were carried out to elucidate the reaction mechanism and verify the feasibility of the process. Electrolysis of Li₂O and reduction of U₃O₈ powder took place simultaneously at the cathode part of the electrolysis cell via a catalytic EC mechanism and the conversion of U₃O₈ to U metal was more than 99%. This revised version was published online in June 2006 with corrections to the Cover Date.     

Enhancement of the Kerr effect for a quantum dot in a cavity

Nonlinear susceptibility of a quantum dot (QD) embedded in a two-sided cavity, is studied theoretically from a weak-coupling to a strong-coupling regime. In the relevance of a quantum logic gate, the corresponding nonlinear phase shifts (Kerr effect) are estimated for coherent wavepackets including one photon on average. In the weak-coupling regime, the phase shift enhances strongly as a function of a coupling constant between the cavity photon and QD, and eventually saturates in the strong-coupling regime. We also show transmission spectra to evaluate the efficiency of the phase shift. Although the efficiency decreases monotonically in the weak-coupling regime, it rises in the strong-coupling regime.     

纳米流体介质导热机理初探

纳米流体导热行为具有许多奇异的特性，结合纳米流体的特点和微尺度传热学原理，研究了 热流在纳米颗粒内波动式及非限域的热传导特性、纳米颗粒在悬浮液内的布朗运动、颗粒- 液体界面上液膜层原子的有规则排列、以及纳米颗粒的团簇形成及移动等四方面因素对纳米 流体导热系数的影响. 关键词： 纳米流体 导热     

单粒子势模型下价核子的密度分布

依据实验事实，利用单粒子势模型，计算了一些核态外层价核子的密度分布.计算给出了价核子在核外部分布的概率和贡献，以此作为晕核态的判断标准.通过研究均方根半径随结合能变化的规律，指出了晕核态存在的条件，尤其是质子晕核态存在的条件.这些对判断和寻找晕核态有现实的指导意义. 关键词： 单粒子势模型 价核子 密度分布 中子晕核态 质子晕核态     

基于新型长周期光纤光栅的掺铒光纤放大器

报道了基于高频CO₂激光脉冲写入的新型长周期光纤光栅的低噪音掺铒光纤放大器,这种新型长周期光纤光栅是用大约几千Hz的高频CO₂激光脉冲对光纤玻璃热冲击作用而形成的.在铒纤中插入一个长周期光纤光栅,会明显减少掺铒光纤放大器的放大自发辐射(ASE)噪音.报道了两种低噪音掺铒光纤放大器,作为前置放大器和线路放大器,它们的ASE噪音指数分别从4.0 dB减少到3.5 dB和从4.8 dB减少到4.3 dB,并且在作为线放时,其小信号增益从30 dB提高到37 dB,降噪及提高增益效应十分显著.     

用数值方法分析微孔激光器出射光的近场特性

微孔激光器作为应用于近场光信息存储系统中的一种新型光源，它的出射光斑的近场特性对于近场光存储是十分重要的。针对纳米孔径运用角谱进行Fox-Li数值迭代，得到不同孔径微孔激光器的基模光强分布，然后运用二维非线性时域有限差分法分析微孔激光器出射端即微孔金属膜的近场光学性质，模拟计算了不同孔径和厚度的微孔金属膜的光强近场分布，从应用于近场光存储的角度，给出反映其近场光学特性的相关数据。发现由于TM模式下金属存在局域表面等离子增强效应，使得其出射强度比TE模式高一个数量级，从而更适于作为实际中近场光存储系统和原理试验的光学头。     

离子束合成钇硅化物的结构及红外谱特征

将稀土金属钇离子注入到n型单晶Si(111)中制备出钇硅化物埋层.利用x射线衍射、卢瑟福背散射和傅里叶红外吸收谱测量分析了样品的结构、原子的埋层分布和振动模式.结果表明，Y离子在注入过程中已与基底中的Si原子形成了YSi2结构相.真空下的红外光辐照处理促使YSi2择优取向生长，埋层中Si与Y的平均原子浓度比由24下降为20，与六方YSi2的化学计量比一致.还给出了钇硅化物的特征红外吸收谱.     

氯柱硼镁石在氯化镁水溶液中相转化平衡液相的红外光谱分析

采用差示FTIR光谱技术,研究了氯柱硼镁石在30℃下浓度为0.5,12和18％MgCl_2水溶液中溶解及相转化平衡饱和水溶液中硼氧配阴离子的FTIR光谱。给出了溶液中硼氧配阴离子的FTIR光谱振动频率的归属,515cm~(-1)为单和二硼氧配阴离子特征峰,630cm~(-1)为三硼氧配阴离子特征峰,550cm~(-1)为四硼氧配阴离子特征峰。对饱和水溶液中硼氧配阴离子的存在形式及其相互作用以及与相转化析出固相的关系进行了讨论。