Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

光纤加速度传感器研究进展

光纤加速度传感器与传统加速度传感器相比，不但能抗电磁干扰，而且体小、质轻、动态范围宽、精度高、能在恶劣环境下工作，因此受到各先进国家军事与商业领域的极大重视，各种实用的光纤加速度传感器不断涌现。主要有光强调制型和相位调制型两大类。光强调制式有反射式、透射式和偏振式等等。相位调制式有Ｍａｃｈ－Ｚｅｎｄｅｒ干涉仪、Ｍｉｃｈｅｌｓｏｎ干涉仪和Ｆａｂｒｙ－Ｐｅｒｏｔ干涉仪。有一维的，也有二维的；有与水听器组合在一起的，也有与光纤陀螺仪组合的光纤加速度传感器。最小的已经做到２．５ｃｍ长，直径仅０．２５ｍｍ；测量精度已能达到１μｇ；共振频率可达到１０ｋＨｚ。为了克服温度不稳定性对测量精度的影响，人们采用了３×３耦合器解调法，双光路法，由单臂式改成推挽式等。一旦关键技术得以克服，光纤加速度传感器将会在惯性导航和其它领域发挥更重要的作用。本文将分别介绍目前各种类型光纤加速度传感器的结构、特点、走向实用化存在的问题。     

二氯和邻菲罗啉二酮的镍(Ⅱ)、铜(Ⅱ)、锌(Ⅱ)配合物的合成与表征

以ＭＣｌ２和配体Ｌ（Ｌ＝１，１０－菲罗啉－５，６－二酮）为原料，合成了标题配合物ＭＬＣｌ２，Ｍ＝ＮｉⅡ，ＣｕⅡ，ＺｎⅡ，并经元素分析、热谱、ＩＲ和摩尔电导表征．三者均为四配位的电中性配合物，热稳定性高于５００Ｋ，易溶于ＤＭＦ、ＤＭＳＯ和吡啶，可溶于乙腈和水．它们在ＤＭＦ中于３５０ｎｍ和３１５ｎｍ附近显示出强的Ｍ－Ｌ荷移跃迁     

A hybrid-Trefftz element containing an elliptic hole

Much work on special elements that simplify geometrical modelling of structures containing holes, cracks and/ or inclusions has been reported extensively in the literature. This paper presents a hybrid-Trefftz element containing elliptic hole formulated using Hellinger–Reissner principle by employing trial functions based on the mapping technique and the Cauchy integral method. The element presented in this paper could be regarded as an improved formulation over Piltner [Special finite elements with holes and internal cracks, Int. J. Numer. Methods Eng. 21 (1985) 1471–1485] element because the chosen trail functions in this paper have provided relatively more stable solutions. The use of the element with other ordinary displacement-based finite elements has also yielded very accurate solutions even when very coarse meshes relative to the size of the elliptic hole have been used.     

杜荀鹤送别诗的城市景观和都会风情

杜荀鹤是晚唐的一个著名诗人,其富于人民性和现实主义精神的政治诗、时事诗历来受到人们高度重视,其写景之作也具有相当的成就.     

复杂机械系统实用故障诊断原则的研究

在总结现有诊断技术成功应用实例的基础上,提出了一种新的实用诊断原则-“最少试验故障模”原则,对于复杂的机械设备和系统,采用这种新的研究思路有利于降低研究难度,提高研究成果的实用性.还以滑动轴承为例,通过对滑动轴承主要失效形式和机理的分析,说明可将滑动轴承简化为-多输入（多种故障原因）-单输出（接触摩擦）的灰色系统模型,并以滑动轴承各种故障的共同特征-接触摩擦作为滑动轴承故障诊断研究的唯一故障基准模.根据上述研究思路,对静、动载荷工作条件下滑动轴承的故障诊断进行了大量的实验研究.实践表明,提出的诊断原则诊断效率高,实用性强,可借鉴用于许多领域的故障诊断.     

新型红外测油仪中的液芯波导技术

首次将液芯波导技术应用于中红外吸收测量的油成分分析领域, 研制的新型MFA-450型红外测油仪的灵敏度比现有同类型仪器提高一个数量级, 检出限为0.01 mg/L(油/萃取剂).     

Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

A highly sensitive and rapid assay for protein determination in human urine and penicillin using a Rayleigh light-scattering technique with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt.

A simple and sensitive method was conducted for the determination of trace amounts of proteins with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt (azophloxine, AP) using a Rayleigh light-scattering (RLS) technique. At pH 2.60 and in the presence of an emulsifier OP microemulsion, the RLS of AP can be greatly enhanced by proteins, owing to the interaction between AP and protein. The enhanced intensity is proportional to the concentration of proteins. Four proteins, including bovine serum albumin (BSA), human serum albumin (HSA), lysozyme (Lys) and gamma globulin (gamma-G) have been tested. For example, the linear range of BSA was 0 - 0.06 microg mL(-1) with detection limits of 2.38 ng mL(-1). The method was applied to the analysis of protein in human urine and penicillin samples with satisfactory results. The relative standard deviation was in all instances less than 4.0%, and the recovery was in the range of 97.5 - 104%.