Resonance Rayleigh scattering method for the recognition and determination of double-stranded DNA using amikacin

In weakly acidic buffer medium, the interaction of amikacin with calf thymus DNA, yeast RNA and denatured DNA has been investigated by using resonance Rayleigh scattering (RRS) technique. The result shows that calf thymus DNA is capable of enhancing the RRS intensity of the amikacin, while yeast RNA and denatured DNA have very little enhancement effect. Based on the characteristics, a sensitive assay for detecting double-stranded DNA in the presence of denatured DNA and yeast RNA has been developed. The enhancement of the RRS signal is directly proportional to the concentration of double-stranded DNA in the range 0.02-12.0 μg ml⁻¹ for calf thymus DNA and its detection limit (3σ) is 2.5 ng ml⁻¹. The method shows a wide linear range and high sensitivity, and almost no interference can be observed from RNA, denatured DNA, amino acid and most of the metal ions. The trace amounts of nucleic acid in synthetic samples and practical samples are determined with satisfactory results. Therefore, the proposed method is promising for as an effect means for recognition in vivo and determination in situ of double-stranded DNA.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Speciation analysis of aluminium(III) in natural waters and biological fluids by complexing with various catechols followed by differential pulse voltammetry detection

The biological effects of aluminium have received much attention in recent years. Speciation of Al is of basic relevance as it concerns its reactivity and bioavailability. A differential pulse voltammetry (DPV) procedure is proposed for speciation analysis of Al(III) in natural waters and biological fluids using six catechols (L-dopa, dopamine, epinephrine, norepinephrine, caffeic acid and o-benzenediol) as electroactive ligands. The decrease of the DPV anodic peak current for each catechol ligand is linear with the increase of Al concentration. This speciation analysis idea is based on the measurement of the complexation capacity, namely, different affinities of Al(III) for catechols and organic ligands under two pH conditions. The labile monomeric Al fraction (mainly inorganic aluminium) is determined at pH 4.6, while the total monomeric Al fraction is determined at pH 8.5. The principle for Al(III) speciation analysis by an electrochemical method is discussed. This sensitive and simple fractionation method is successfully applied to the speciation analysis of Al in natural waters and the results agree well with those of Driscoll's method. The speciation analysis of Al in biological fluids is also explored and the results are compared with those obtained by ultrafiltration and dialysis. Compared with other speciation protocols the electrochemical method possesses some remarkable advantages: rapidity, high sensitivity, cheap instrumentation and a simple operation procedure.     

Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

Synthesis and biological activity of novel epothilone aziridines

[reaction: see text]. A series of 12alpha,13alpha-aziridinyl epothilone derivatives were synthesized in an efficient manner from epothilone A. The final semisynthetic route involves a formal double-inversion of stereochemistry at both the C12 and C13 positions. All aziridine analogues were tested for effects on tubulin binding polymerization and cytotoxicity. The results indicate that the aziridine moiety is a viable isosteric replacement for the epoxide in the case of epothilones.     

Temporal Response of SERS to the Potential for 4-Cyanopyridine Adsorbed on Ag Electrode

Time-resolved surface-enhanced Raman scattering (SERS) was applied to study the response of Raman bands from 4-cyanopyridine (PyCN) adsorbed on a Ag electrode to variation of the potential; the temporal resolution was 0.1 s. The response of the SERS signals of PyCN was instantaneous to the oxidation potential of Ag electrode. However, delay of the SERS signals was observed while AgCl was reducing. The decay and growth of the SERS bands look place within 1 s in the cases of desorption and adsorption of PyCN on the electrode. It took much longer for PyCN to alter from one adsorption geometry to another on the electrode.     

Concise total syntheses of the bioactive mesotricyclic diterpenoids jatrophatrione and citlalitrione

The highly functionalized [5.9.5] tricyclic framework resident in jatrophatrione (1) and citlalitrione (2) has been synthesized. The route begins with the tandem anionic oxy-Cope rearrangement/methylation/transannular ene cyclization of 21 and subsequent introduction of a conjugated enone double bond. Hydroxyl-directed 1,4-reduction of this functionality in 25 with LiAlH(4)/CuI/hexamethylphosphoramide/tetrahydrofuran sets the stage for the implementation of a Grob fragmentation and expedited generation of 27. Stereocontrolled intramolecular hydrosilylation allows for the subsequent introduction of a cyclic carbonate as in 53. This intermediate undergoes remarkably efficient, fully regiocontrolled Treibs reaction to generate 54, with this maneuver serving as a pivotal step for making 1 available five steps later. Treatment of 1 with m-chloroperbenzoic acid leads to 2, with attack occurring preferentially on a alpha-face of the double bond more remote to the carbonyl.     

Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.     

稀土掺杂的(K, Sr)Cl·SiO2复合凝胶的荧光性能

采用sol gel法制备了单掺铕及共掺铕、铈的(K,Sr)Cl·SiO2复合凝胶,研究了复合凝胶的荧光性能。根据荧光测试结果,复合凝胶中,Eu3+在没有还原剂的作用下,可以与基质作用形成还原态的Eu2+,复合凝胶表现出相应的Eu2+荧光性能;研究认为,Ce3+,Eu3+共掺杂时,复合凝胶激发光谱与发射光谱峰位基本不变,但强度有所不同。330nm处的激发光谱明显增强,且发射光谱随Ce3+的掺杂量增加而增强。当Ce3+掺杂浓度为3.0%(原子分数)时,复合凝胶具有最大的荧光发射强度,表明Ce3+具有很好的敏化作用。在Ce3+,Eu3+共掺杂复合凝胶体系中,复合凝胶荧光强度增大的原因既可能是电子转移过程,也可能是Ce3+→Eu2+的能量传递过程所致。     

Determination of phenols in soil by supercritical fluid extraction-capillary electrochromatography

A new analytical procedure is developed to couple supercritical fluid extraction with capillary electrochromatography (SFE-CEC) to extract and determine phenols in soil. Ten phenols consisting of phenol, methylphenols (p-cresol and o-cresol), dimethylphenols (3,5-xylenol, 3,4-xylenol and 2,6-xylenol), trimethylphenol, ethylphenols (p-ethylphenol and o-ethylphenol), and o-isopropylphenol are investigated. The use of supercritical CO2 with 10% methanol as the organic modifier was found to give satisfactory extraction of alkylphenols from soil at 1200 p.s.i. and 50 degrees C for 45 min under a total extractant flow-rate of 0.2 ml/min (1 p.s.i.=6894.76 Pa). Baseline resolution was achieved for the 10 selected phenols under optimised CEC conditions at 20 kV in a mobile phase of acetonitrile-4 mM Tris, pH 7.0 (35:65) in a 45 cm (25 cm packed with 3 microm ODS) x 75 microm I.D. fused-silica capillary column. Using SFE with a 10-fold preconcentration factor, all alkyl-substituted phenols in soil can be determined with detection limits ranging from 0.0032 to 0.014 mg/kg and working range from 0.019 to 2.72 mg/kg. The SFE-CEC procedure developed has been applied successfully to determine phenols extracted from real soil sample contaminated with medical disinfectant. It will provide a rapid method for the direct determination of phenol and alkyl-substituted phenol in soils, with capability for confirmation of unknown peaks.