An interesting two‐phase solvent system and its use in preparative isolation of aconitines from aconite roots by counter‐current chromatography

Two‐phase solvent system plays crucial role in successful separation of organic compounds using counter‐current chromatography (CCC). An interesting two‐phase solvent system, composed of chloroform/ethyl acetate/methanol/water, is reported here, in which both phases contain sufficient organic solvents to balance their dissolving capacities. Adjusting the solvent system to get satisfactory partition coefficients (K values) for target compounds becomes relatively simple. This solvent system succeeded in sample preparation of aconitine (8.07 mg, 93.69%), hypaconitine (7.74 mg, 93.17%), mesaconitine (1.95 mg, 94.52%) from raw aconite roots (102.24 mg, crude extract), benzoylmesaconine (34.79 mg, 98.67%) from processed aconite roots (400.01 mg, crude extract), and yunaconitine (253.59 mg, 98.65%) from a crude extract of Aconitum forrestii (326.69 mg, crude extract).     

Evaluation of the combinative application of SDS and sodium deoxycholate to the LC–MS‐based shotgun analysis of membrane proteomes

SDS and sodium deoxycholate (SDC) as two representative detergents have been widely used in LC–MS/MS‐based shotgun analysis of membrane proteomes. However, some inherent disadvantages limit their applications such as interference with MS analysis or their weak ability to disrupt membranes. To address this, the combinative application of SDS and SDC was developed and evaluated in our study, which comprehensively used the strong ability of SDS to lyse membranes and solubilize hydrophobic membrane proteins, and the high efficiencies of an optimized acetone precipitation method and SDC in sample clean‐up, protein recovery, and redissolution and digestion of precipitated proteins. The comparative study using a rat‐liver‐membrane‐enriched sample showed that, compared with other three commonly used methods including the filter‐aided sample preparation strategy, the combinative method not only increased the identified number of total proteins, membrane proteins, and integral membrane proteins by an average of 19.8, 23.9, and 24.8%, respectively, but also led to the identification of the highest number of matching peptides. All these results demonstrate that the method yielded better recovery and reliability in the identification of the proteins especially highly hydrophobic integral membrane proteins than the other three methods, and thereby has more potential in shotgun membrane proteomics.     

Two lanthanum(III) complexes containing η2‐pyrazolate and η2‐1,2,4‐triazolate ligands: intramolecular C—H...N/O interactions and coordination geometries

The lanthanum(III) complexes tris(3,5‐diphenylpyrazolato‐κ²N,N′)tris(tetrahydrofuran‐κO)lanthanum(III) tetrahydrofuran monosolvate, [La(C₁₅H₁₁N₂)₃(C₄H₈O)₃]·C₄H₈O, (I), and tris(3,5‐diphenyl‐1,2,4‐triazolato‐κ²N¹,N²)tris(tetrahydrofuran‐κO)lanthanum(III), [La(C₁₄H₁₀N₃)₃(C₄H₈O)₃], (II), both contain La^III atoms coordinated by three heterocyclic ligands and three tetrahydrofuran ligands, but their coordination geometries differ. Complex (I) has a mer‐distorted octahedral geometry, while complex (II) has a fac‐distorted configuration. The difference in the coordination geometries and the existence of asymmetric La—N bonding in the two complexes is associated with intramolecular C—H...N/O interactions between the ligands.     

ZnII and CuII complexes generated from 5‐(pyridin‐4‐yl)‐3‐[2‐(pyridin‐4‐yl)ethyl]‐1,3,4‐oxadiazole‐2(3H)‐thione

A new 1,3,4‐oxadiazole‐containing bispyridyl ligand, namely 5‐(pyridin‐4‐yl)‐3‐[2‐(pyridin‐4‐yl)ethyl]‐1,3,4‐oxadiazole‐2(3H)‐thione (L), has been used to create the novel complexes tetranitratobis{μ‐5‐(pyridin‐4‐yl)‐3‐[2‐(pyridin‐4‐yl)ethyl]‐1,3,4‐oxadiazole‐2(3H)‐thione}zinc(II), [Zn₂(NO₃)₄(C₁₄H₁₂N₄OS)₂], (I), and catena‐poly[[[dinitratocopper(II)]‐bis{μ‐5‐(pyridin‐4‐yl)‐3‐[2‐(pyridin‐4‐yl)ethyl]‐1,3,4‐oxadiazole‐2(3H)‐thione}] nitrate acetonitrile sesquisolvate dichloromethane sesquisolvate], {[Cu(NO₃)(C₁₄H₁₂N₄OS)₂]NO₃·1.5CH₃CN·1.5CH₂Cl₂}_n, (II). Compound (I) presents a distorted rectangular centrosymmetric Zn₂L₂ ring (dimensions 9.56 × 7.06 Å), where each Zn^II centre lies in a {ZnN₂O₄} coordination environment. These binuclear zinc metallocycles are linked into a two‐dimensional network through nonclassical C—H...O hydrogen bonds. The resulting sheets lie parallel to the ac plane. Compound (II), which crystallizes as a nonmerohedral twin, is a coordination polymer with double chains of Cu^II centres linked by bridging L ligands, propagating parallel to the crystallographic a axis. The Cu^II centres adopt a distorted square‐pyramidal CuN₄O coordination environment with apical O atoms. The chains in (II) are interlinked via two kinds of π–π stacking interactions along [01]. In addition, the structure of (II) contains channels parallel to the crystallographic a direction. The guest components in these channels consist of dichloromethane and acetonitrile solvent molecules and uncoordinated nitrate anions.     

Ultrasensitive electrochemical immunosensor for zeranol detection based on signal amplification strategy of nanoporous gold films and nano-montmorillonite as labels

Nano-montmorillonites belong to aluminosilicate clay minerals with innocuity, high specific surface area, ion exchange, and favorable adsorption property. Due to the excellent properties, montmorillonites can be used as labels for the electrochemical immunosensors. In this study, nano-montmorillonites were converted to sodium montmorillonites (Na-Mont) and further utilized for the immobilization of thionine (TH), horseradish peroxidase (HRP) and the secondary anti-zeranol antibody (Ab₂). The modified particles, Na-Mont-TH-HRP-Ab₂ were used as labels for immunosensors to detect zeranol. This protocol was used to prepare the immunosensor with the primary antibody (Ab₁) immobilized onto the nanoporous gold films (NPG) modified glassy carbon electrode (GCE) surface. Within zeranol concentration range (0.01–12 ng mL⁻¹), a linear calibration plot (Y = 0.4326 + 8.713 X, r = 0.9996) was obtained with a detection limit of 3 pg mL⁻¹ under optimal conditions. The proposed immunosensor showed good reproducibility, selectivity, and stability. This new type of immunosensors with montmorillonites and NPG as labels may provide potential applications for the detection of zeranol.     

Glucose oxidase-functionalized fluorescent gold nanoclusters as probes for glucose

Creation and application of noble metal nanoclusters have received continuous attention. By integrating enzyme activity and fluorescence for potential applications, enzyme-capped metal clusters are more desirable. This work demonstrated a glucose oxidase (an enzyme for glucose)-functionalized gold cluster as probe for glucose. Under physiological conditions, such bioconjugate was successfully prepared by an etching reaction, where tetrakis (hydroxylmethyl) phosphonium-protected gold nanoparticle and thioctic acid-modified glucose oxidase were used as precursor and etchant, respectively. These bioconjugates showed unique fluorescence spectra (λ_{em max} = 650 nm, λ_{ex max} = 507 nm) with an acceptable quantum yield (ca. 7%). Moreover, the conjugated glucose oxidase remained active and catalyzed reaction of glucose and dissolved O₂ to produce H₂O₂, which quenched quantitatively the fluorescence of gold clusters and laid a foundation of glucose detection. A linear range of 2.0 × 10⁻⁶–140 × 10⁻⁶ M and a detection limit of 0.7 × 10⁻⁶ M (S/N = 3) were obtained. Also, another horseradish peroxidase/gold cluster bioconjugate was produced by such general synthesis method. Such enzyme/metal cluster bioconjugates represented a promising class of biosensors for biologically important targets in organelles or cells.     

Self-assembly of coil-rod-coil molecules into bicontinuous cubic and oblique columnar assemblies depending on coil chain length

Coil-rod-coil molecules 1–3, consisting of four biphenyls and a p-terphenyl unit linked together with ether bonds as a rod segment and poly(propylene oxide) (PPO) with a degree of polymerization (DP) of 7, 12, 17 as coil segments were synthesized. These molecules contain lateral methyl groups at 2 and 5 positions of the middle benzene ring of p-terphenyl. The self-assembling behavior of molecules 1–3 was investigated by means of DSC, POM and SAXS in the bulk state. Molecule 1 self-organizes into a lamellar structure in the bulk state and transfers into a bicontinuous cubic structure in the liquid crystalline phase. While, molecules 2, 3 containing longer coil chains than 1 self-assemble into the hexagonal perforated lamellar (HPL) structures and the oblique columnar structures in the solid state and liquid crystalline phase, respectively. These results reveal that self-organizing behavior of such molecules is dramatically influenced by the length of the coil chains connected with the rod building block, as well as the lateral methyl groups incorporating in the middle of the rod segment.     

Unusual Spirodecane Sesquiterpenes and a Fumagillol Analogue from Cordyceps ophioglossoides

Investigation of the cultured mycelia of Cordyceps ophioglossoides resulted in the isolation and characterization of three new unusual spiro[4.5]decane sesquiterpenes, cordycepol A ( 1 ), cordycepol B ( 2 ), and cordycepol C ( 3 ), and a new fumagillol analogue, cordycol ( 4 ). Their structures were established by spectroscopic means. The cytotoxic activities were also evaluated, compounds 3 and 4 showing their IC₅₀ values in the range of 12–33 μg/ml against HeLa and HepG2 (Table 3). In addition, 3 and 4 were not obviously harmful towards normal liver cell lines LO2, showing IC₅₀ values above 80 μg/ml.     

Five New Cycloartane‐Type Triterpenoid Saponins from Nervilia fordii

Five new cycloartane glycosides, nervisides D–H ( 1 – 5 ), were isolated from the AcOEt‐ and H₂O‐soluble portions of the 90% EtOH extract of the aerial part of the plant Nervilia fordii. The structures of the isolated glycosides were elucidated by extensive spectroscopic analysis including HR‐ESI‐MS and NMR data. The isolated nervisides D–H were evaluated for the cytotoxic activity in vitro against human‐tumor cell lines (CNE, Hep‐2 and HepG2) with the MTT method.