Quantitative study on selective stacking of zwitterions in large-volume sample matrix by moving reaction boundary in capillary electrophoresis

The paper advanced the theoretical procedures for quantitative design on selective stacking of zwitterions in full capillary sample matrix by a cathodic-direction moving reaction boundary (MRB) in capillary electrophoresis (CE) under control of electroosmotic flow (EOF). With the procedures, we conducted the theoretical computations on the selective stacking of two test analytes of L-histidine (His) and L-tryptophan (Trp) by the MRB created with 30 mM pH 3.0 formic acid-NaOH buffer and 2-80 mM sodium formate. The results revealed the following three predictions. At first, the MRB cannot stack His and Trp plugs if less than 12.5 mM sodium formate is used to form the MRB and prepare the sample matrix. Second, the MRB can stack His and/or Trp sample plugs completely if higher than 50 mM sodium formate is chosen to form the MRB. Third, the MRB can only focus His plug completely, but stack Trp plug partially if 20-50 mM sodium formate is used; this implied the complete MRB-induced selective stacking to His rather than Trp. All the three predictions were quantitatively proved by the experiments. With great dilution of sample matrix and control of EOF, controllable, simultaneous and MRB-induced selective stacking and separation of zwitterions were achieved. The theoretical results hold evident significances to the quantitative design of selective stacking conditions and the increase of detection sensitivity of zwitterions in CE. In addition, the control of EOF by cetyltrimethylammonium bromide (CTAB) can evidently improve the stacking efficiency to both His and Trp.     

碳铂类似物的合成,表征及对大鼠W—256肉瘤的抑制作用

合成了十八种〔PtA_2X〕·yH_2O,其中A分别为NH_3、CH_3NH_2、1/2乙二胺和1/2(2,3-二甲基-2,3-丁二胺),X分别为1,1-环丙烷二羧酸根(CPrDCA)、2-甲-1,1-环丙烷二羧酸根(2-M-CPrDCA)、2-甲-1,1-环丁烷二羧酸根(2-M-CBDCA)、1,2-环戊烷二羧酸根(CPDCA)和1,1-环已烷二羧酸根(CHDCA),并进行了表征。测定了配合物抑制大鼠W-256肉瘤的活性,发现配合物〔Pt(NH_3)_2X〕系列按X不同有以下的活性次序:CPrDCA>2-M-CPrDCA>CPDCA>CBDCA(碳铂)≥2-M-CBDCA。     

N-取代苯并咪唑和N-取代-2-硫代噻唑烷酮类化合物的质谱研究

本文所研究的7种N-取代苯并咪唑和硫代噻唑烷酮类化合物是一类新合成的具有较高杀菌活性的化合物。本文利用电子轰击质谱技术对表中所列的化合物进行了研究。在高分辨精确质量测量和亚稳离子测定的基础上着重讨论了分子内3、4位C—C键的断裂和与杂环     

Nonequilibrium solid phase formation studied by lattice dynamics calculation and ion beam mixing in an immiscible Co-Ag system

For the equilibrium immiscible Co-Ag system, a proven realistic ab initio derived n-body potential is applied to study the nonequilibrium solid phase formation at three chemical stoichiometries of Co/Ag = 1:3, 1:1, and 3:1. To predict the structural stability, the elastic constants and the phonon spectra are calculated at the chosen stoichiometries with a total of eight hypothetical crystalline structures. The calculated results suggest that four compounds, that is, D0(3) CoAg3, B1 CoAg, B2 CoAg, and D0(3) Co3Ag, are unstable, as they all feature negative elastic constants as well as imaginary phonons, and that another four compounds of both fcc-type L1(2) and hcp-type D0(19) structures at chemical stoichiometries of Co/Ag = 1:3 and 3:1, respectively, may elastically be favored and therefore obtainable under some specific conditions. It is also found that all the calculated elastic constants and phonon spectra are coincident within the framework of the elastic theory. Moreover, the calculated elastic constants are in good agreement with those acquired directly from ab initio calculations, lending support to the validity of the ab initio derived n-body Co-Ag potential as well as its resultant elastic constants and the phonon spectra. Interestingly, some of the predicted nonequilibrium solid phases, that is, two hcp-type compounds at chemical stoichiometries of Co/Ag = 1:3 and 3:1, respectively, are indeed obtained in ion beam mixing experiments and their lattice constants determined by diffraction analysis are in good agreement with those from calculations.     

Quantum chemistry investigation on the active site of Mn-SOD

In this paper, we carried out a theoretical study on the active site structures of the Mn-SOD with ab initio Hartree–Fock SCF method, and analyzed the molecular orbital energies, charges and atomic orbital contribution to the frontier molecular orbital.     

SiO_2负载钼催化剂的合成及其催化乙烯二聚、同系化和歧化的反应性能

从单核及双核二甲胺钼络合物出发,制备了SiO_2负载的钼催化剂。程序升温分解实验(TPDE)及红外测试表明,双核钼络合物与SiO_2作用生成双钼中心物种,此物种可催化乙烯的二聚反应。280℃活化后此双钼中心物种变成单钼中心物种,单钼物种只催化乙烯的同系化及歧化反应。     

四种溴代甲苯异构体的质谱区分

本工作用四种较新的质谱技术(碰撞诱导解离(CID),电荷剥离(CS),电荷分离(CSe),电子捕获诱导解离(ECID)谱研究了邻、间、对溴甲苯和溴化苄四种异构体。四种技术在一定程度上都可区分这些异构体。其中比较四种异构体ECID谱中ECID峰的相对强度可得到满意的区分效果。     

钴-5,10,15,20-四(3-甲氧基-4-羟基苯基)卟啉修饰玻碳电极的L-抗坏血酸化学传感器研究

将水合 5,10,15,20-四-(3-甲氧基-4-羟基苯基)钴卟啉(CoTMHPP)修饰在玻碳电极表面,制成CoTMHPP修饰电极.电极稳定性好且灵敏度高,对抗坏血酸有良好的电催化氧化作用,测定线性响应范围为1.0×10(-5)～1.0×10(-2)mol/L,响应时间小于12s.本文研究了电极的性质和应用,并用于药物中抗坏血酸的测定,其测定结果与碘量法一致.     

辐照聚甲醛聚合机理、结构与形态的研究——Ⅱ.三聚甲醛单晶辐照引发固相聚合产物的亚微观结构

三聚甲醛单晶经Co_(60)γ射线辐照可以得到一种结晶度很高的聚三聚甲醛。在辐照聚合制得的聚三聚甲醛的迴转图上,除出现普通聚甲醛的衍射点外,还存在着一些新的衍射斑点。 聚三聚甲醛沿着原来三聚甲醛的c轴可以劈成纤维,在迴转图中新的衍射斑点,当样品加温处理后会逐渐消失。 比较聚甲醛与三聚甲醛分子所占的空间,我们认为:聚甲醛确有四种不同取向的晶区,它们联结在一起形成许多曲棍状的微晶。     

Effects of polymer architecture and composition on the adhesion of poly(tetrafluoroethylene).

Poly(glycidyl methacrylate), PGMA, chains in linear and arborescent structures were incorporated onto surfaces of poly(tetrafluoroethylene), PTFE, films by hydrogen plasma and ozone treatment and atom transfer radical polymerization. The epoxide groups of the PGMA chains were further reacted with acetic acid (AAc), oxalic acid (XAc), allyl amine (AA), and ethylenediamine (EDN) to introduce hydroxyl and amine groups to the surfaces of the PTFE films. Surface characterizations performed by Fourier Transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the surface modification and the chemical structure. The PGMA chains in arborescent structures show a high effectiveness for the enhancement of the adhesion of PTFE films. The adhesion of PTFE films was also significantly enhanced by ring-opening reactions of the PGMA epoxide groups with acetic acid and amine compounds. A high value of 9.5 N cm(-1) in the optimum 180 degrees peel strength test was observed with PTFE/copper assemblies.