高压下聚苯胺的结构和电性能研究

 以金刚石压腔高压装置为工具，用Ⅱ型金刚石作压砧兼红外窗口，对本征态聚苯胺进行了高压（0~8.4 GPa）就位红外光谱测试。结果表明：在4.8~5.2 GPa压力区间，代表醌环振动的吸收峰相对代表苯环振动的吸收峰变小，表明聚苯胺在此压力区间结构上发生了显著变化，且这种变化是不可逆的。聚苯胺的高压（0~14.5 GPa）电阻测量结果表明：当压力小于7.5 GPa时，电阻随压力升高而显著降低，据此认为聚苯胺为电子性导电物质；在7.5 GPa处电阻出现极小值，然后又缓慢升高，至10 GPa后基本不变。推测聚苯胺电阻极小值是由结构变化引起的。至于红外光谱与电阻测量结果反映聚苯胺结构变化的压力值不一致，可能是由于测试条件不同所致。     

Double-diffusive convection for a heated cylinder submerged in a salt-stratified fluid layer

Double-diffusive convection due to a cylindrical source submerged in a salt-stratified solution is numerically investigated in this study. For proper simulation of the vortex generated around the cylinder, a computational domain with irregular shape is employed. Flow conditions depend strongly on the thermal Rayleigh number, Ra _T , and the buoyancy ratio, R _ρ. There are two types of onset of instability existing in the flow field. Both types are due to either the interaction of the upward temperature gradient and downward salinity gradient or the interaction of the lateral temperature gradient and downward salinity gradient. The onset of layer instability due to plume convection is due to the former, whereas, the onset of layer instability of layers around the cylinder is due to the latter. Both types can be found in the flow field. The transport mechanism of layers at the top of the basic plume belongs to former while that due to basic plume and layer around the cylinder are the latter. The increase in Ra _T reinforces the plume convection and reduces the layer numbers generated around the cylinder for the same buoyancy ratio. For the same Ra _T , the increase of R _ρ suppresses the plume convection but reinforces the layers generated around the cylinder. The profiles of local Nusselt number reflects the heat transfer characteristics of plume convection and layered structure. The profiles of averaged Nusselt number are between the pure conduction and natural convection modes and the variation is due to the evolution of layers. Received on 13 September 1996     

一类逆半群的亚直可约性

本文利用逆半群上的同余扩张，讨论了一类逆半群的亚直可约性，并刻划了这类逆半群的幂等元集的特征。     

Time-harmonic response of a vertical crack in plates

A technique for the characterization of an interior crack perpendicular to the surface of the plates is presented. A time-harmonic line load is applied on the upper surface of the plate. The scattered displacement field is calculated by using the strip element method. It is found that there are additional superimposed oscillations in the curve of the absolute values of the displacement in the region between the load and the crack. The mean value of the peaks of the additional oscillations increases with the crack length, and is less dependent on the distance from the load to the crack. The crack position is determined from the displacement distribution curve and the crack length is determined from the mean value of the peaks of the additional oscillations. Approximate polynomial formula of degree four for predicting the length of interior vertical cracks in isotropic homogeneous plates is also proposed. Numerical examples are given to demonstrate the present technique.     

用DEA方法测算产出弹性

本文主要讨论并给出了把ＤＥＡ模型Ｃ２ＧＳ２用于测算产出的弧弹性的方法。     

抗癌药物蓖麻油提取物的气相色谱分析

文[1]曾报道将蓖麻油提取物精制品制成乳剂和多相脂质体,进行动物体内外抗癌活性实验,结果表明该提取物具有较强的抗癌活性,但其抗癌活性成分的组成和含量尚不清楚.本实验就蓖麻油提取物的组成和含量进行气相色谱分析.     

彩色珠光粉的研制

本文探讨了以有机染料为着色剂合成彩色珠光粉的合成方法,并对金属氢氧化物吸附量、有机染料用量、搅拌时间及 pH 值等影响产品性能的因素进行了讨论.     

过渡金属乙酰丙酮配合物引发淀粉与烯基单体接枝共聚

研究了Ｍｎ（Ⅲ）、Ｃｏ（Ⅲ）、Ｃｒ（Ⅲ）和Ｖ（Ⅳ）的乙酰丙酮配合物引发淀粉与ＭＭＡ、ＡＮ、ＡＭ和ＡＡ接枝共聚合反应的引发活性。实验表明，４种引发体系中，Ｍｎ（ａｃａｃ）３的引发活性最佳，它可以有效地引发淀粉与上述４种单体的接枝共聚合反应，并获得较高的ＰＧ；Ｃｏ（ａｃａｃ）３和Ｃｒ（ａｃａｃ）３仅对水溶性烯基单体ＡＭ、ＡＡ有良好的引发活性；Ｖｏ（ａｃａｃ）２对４种单体的引发活性均较低。４种单体中，水     

Quality assurance for the analytical data of micro elements in food

The micro element content of food is an important quality index due to the action of these elements on human health. In this article, we discuss how to ensure the reliability of analytical data on micro elements in order to truly represent the condition of food. Sampling, treatment of the analytical sample, selection of the analytical method, standard solution, and certified reference material, blank test, calibration of the instrument and equipment, application of the quality control chart, assessment of the final analytical result, and quality assurance system are briefly described. Received: 5 July 2001 Accepted: 19 November 2001     

Dielectric effect on the rf characteristics of a helical groove travelling wave tube

A new type of partial-dielectric-loaded helical groove slow-wave structure (SWS) for millimetre wave travelling wave tube (TWT） is presented in this paper.The radio-frequency characteristics including the dispersion properties,the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analysed.The results show that the dispersion of the helical groove circuit is weakened,the phase velocity is reduced and the position of the maximum Ez is moved from the mouth to the inside of the groove after partially filling the dielectric materials in the helical groove SWS.Therefore,the dielectric-loaded helical groove SWS is suitable for a multi-beam TWT with broad band and high gain.