司法公正视野下的普通程序简化审--兼谈普通程序简化审的改革与完善

普通程序简化审以不突破现有法律寻求合法性，同时由于建立在被告人认罪的基础上，且有利于司法资源的合理配置，从整体上实现正义，而具有公正性的基础。但目前对该项改革的公正性的程序保障不足，应赋予被告人知悉权。获得律师帮助权及设立其它程序保障被告人对普通程序简化审的选择，是合法、自愿、明智的，且其认罪、选择必须得到中立法官的审查确认。     

基于事件响应event-response的动态工作流系统

提出了一种在企业工作流管理系统中运用由协作的各企业提供的对事件的响应(event-response)的方案来实现动态的工作流系统。通过工作流引擎灵活地调度、控制，利用基于约束的动态绑定机制动态地将事件的响应请求绑定到合适的event-response和响应提供者(provider)，从而柔性地，协同地完成共同的目标。     

模具热处理工艺并行设计

针对目前模具热处理中存在的问题，提出模具热处理工艺并行设计的新思想，将热处理CAD／CAE集成于并行环境中，并建立了相关模型，在各模块之间以实体一关系模型串联，建立动态推理机制，可使各单元模型间实现联动效应．将温度、组织、应力及性能进行耦合是模具热处理未来发展的方向，但建立一个普适性的数学模型是必要的，通过灵活的管理与协调，可及时沟通信息，减少冲突与冗余过程。     

FIPA合同网协议的一种改进方案

针对FIPA合同网协议的一个典型扩展协议CNCP提出增设阈值的改进方案．因为无论Agent同时参与几项招标，最终它只能与其中某一个任务发起者建立正式合同关系，所以在确保Agent可在绝大多数情况下获得至少一个任务执行权的前提下，对参与招标的Agent一方设置合适的阈值，限定其同时处理的cfp的数量，可以为参与者一方减少大量不必要的计算消耗，降低任务被低效执行或最终得不到执行的风险，从而对系统整体性能的提升有所裨益．     

快速成形技术中轮廓环的分组算法及其应用

以平面内轮廓环的存在规则和相互关系为出发点，提出了一种简单实用的轮廓环的分组算法，通过本方法对平面的轮廓环进行分组，能够把一个平面分解成一系列简单的单连通区域，分组后的轮廓环不仅能够在进行其他运算时减少重复计算，而且可以在分区填充扫描线时减少分区数，从而减少实际扫描时的空跳．     

带光学窗口的ICF低温冷冻靶用低温恒温器

研制了一种热梯度法制备核聚变低温冷冻靶用低温恒温器，通过上下热连接杆使试样盒冷却，配合电加热器以及控温系统，使样品盒的平均温度可以控制在10-40K试验温度范围内，并实现均匀温度梯度。     

Robot Calibration Using Active Vision-based Measurement

This paper presents an efficient robot calibration method with non-contact vision metrology. Using the coplanar pattern to calibrate camera made the active-vision-based end-effector pose measurement be a feasible and cost-effective way. Kinematic parameter errors were linearized and identified through two-step procedure, thus the singular and non-linear condition was overcome. These errors were then compensated using inverse model method. The whole calibration process is flexible, easy to implement and prevents the error propagation from the earlier stages to the later ones. Calibration was performed on MOTOMAN SV3 industrial robot. Experiment results show that the proposed method is easy to setup and with satisfactory accuracy.     

Switched Capacitor Network Analysis by Means of TCM

The totally coded method (TCM) reveals the same objective law, which governs the gain calculating for signal flow graph as Mason formula does. This algorithm is carried out merely in the domain of code operation. Based on pure code algorithm, it is more efficient because figure searching is no longer necessary. The code-series (CS), which are organized from node association table, have the holoinformation nature, so that both the content and the sign of each gain-term can be determined via the coded method. The principle of this method is obvious and it is suited for computer programming. The capability of the computeraided analysis for Switched Capacitor (SCN) can be enhanced.     

Meshing Theoretical Study and Simulation on Cylindrical Tri-sine Oscillating Tooth Gear Drive

The structure of cylindrical tri-sine oscillating tooth gear drive is presented. Based on the space meshing theory, equations of meshing and tooth profile are established and its meshing theory is studied. Using Pro/E, this system is modeled and simulated,which is compared with the above-established equations.     

Kinetics of Chlorine Decay in Water Distribution Systems

A combined first and second-order model, which includes bulk decay and wall decay, was developed to describe chlorine decay in water distribution systems. In the model the bulk decay has complex relationships with total organic carbon (TOC), the initial chlorine concentration and the temperature. Except for the initial stages they can be simplified into a linear increase with TOC, a linear decrease with initial chlorine concentration and an exponential relationship with the temperature. The model also explains why chlorine decays rapidly in the initial stages. The parameters of model are determined by deriving the best fitness with experimental data. And the accuracy of model has been verified by using the experimental data and the monitoring data in a distribution system.