Characteristics of nanosized ruthenium metal by chemical reduction method

Nano-sized Ru metals have been prepared by the chemical reduction of ruthenium chloride and ruthenium hydroxide. Sodium borohydride was used as a reducing agent. The samples have been characterized by elemental analysis, X-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. The preparation method greatly affects the composition and surface area of the material. All the samples show nanosized particles. However, samples prepared by reduction of ruthenium hydroxide had a lower surface area and larger particle size than those prepared by reduction of ruthenium chloride. Residual amount of boron was present in the samples. The samples demonstrate amorphous structure.     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

气体催化裂解法制备高纯碳纳米管的研究

利用有机气体化学裂解技术 ,用二甲苯作碳源 ,二茂铁作催化剂 ,噻吩作助长剂 ,氢气作载气 ,对碳纳米管的制备进行了研究 .研究结果表明 ,二甲苯流量、氢气流量及有机气体裂解温度等工艺参数对碳纳米管的产量及形态有很大的影响 ;在反应温度为 10 0 0～ 110 0℃ ,氢气流量为 15 0mL·min- 1,二甲苯的流量为 0 .12 1mL·min- 1时 ,能获得直径为 4 0～ 10 0nm的碳纳米管 ,碳纳米管的纯度可达 95 %以上 .     

PET-云母复合体系的双重Tg转变

本文用粘弹谱仪、x射线衍射、DSC研究了PET—云母复合物的Tg区域的多重转变等松驰转变行为,探讨了加工、云母填充对PET—云母材料性能影响的分子运动机理。不同热历史(如不同成型条件、热处理等)使聚合物分子形成不同链段运动;处于高温位的Tg(u)其运动单元是受结晶、内应力、填料作用影响的非晶区链段。     

Solvothermal synthesis of TiO2: anatase nanocrystals and rutile nanofibres from TiCl4 in acetone

This work reports a new synthetic approach for single‐phase TiO₂ nanomaterials by solvothermal treatment of titanium tetrachloride in acetone at 80–110 °C. Small, uniform, and yet size‐tunable (5–10 nm) anatase titania nanocrystallites were obtained using a low concentration of TiCl₄ in acetone (i.e., at molar ratios of TiCl₄/acetone ≤ 1:15) in the temperature range of 80–110 °C, while rutile nanofibers were synthesized using a high concentration of TiCl₄ (e.g., TiCl₄/acetone = 1:10) at 110 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

流线型挤出模曲面构造

根据塑料挤出的特点，在编程实现对型材截面轮廓凸凹性自动判断的基础上，采用射线法与比例间隔法相结合的方法，确定流道入口圆周上型值点的位置．以三次多项式作为流道模腔型曲线的数学模型，依据流线型要求给出的初始、边界条件，得出型曲线的数学方程．构建了挤出模流道的三维参数化曲面模型．有限元分析结果显示，该方法创建的流线型流道模型，其流动稳定性和平顺性都优于直线型流道．     

多媒体教学手段在天文教育中的应用--天文教学系列软件"探索宇宙"简介

结合中国目前天文学教育的现状和我系开展基础天文学教学的体会,对天文学教学中如何利用多媒体的手段进行了论述,并重点介绍了天文系列多媒体教学软件<探索宇宙>的特点和主要内容.     

HEp-2细胞MPM-2磷蛋白的蛋白质组学分析

MPM-2磷蛋白家族成员在有丝分裂进程中起着重要作用．为了从MPM-2磷蛋白家族层面入手研究细胞周期调控中磷蛋白的重要作用，以人上皮样喉癌细胞株HEp-2为细胞模型，运用双向电泳、免疫印迹以及质谱技术等蛋白质组学的方法对其细胞抽提物中的部分MPM-2磷蛋白进行了分析鉴定，初步确定了乙二醛酶(GlyoxalaseⅠ)、真核翻译起始因子(eIF4B)以及核质蛋白NPM等MPM-2特异识别的细胞磷蛋白，这将有助于进一步研究MPM2磷蛋白家族成员在细胞周期调控中的重要作用．     

氯化铝工业生产中几个工艺技术问题的探讨

本文详细论述了利用废铝生产氯化铝过程中,设备及各控制因此对产品质量和颗粒度的影响,(?)了适宜的控制条件和设计要求,为生产不同用户需求的合格产品提供了可靠的依据。