Theoretical study of isomerization and dissociation of acetylene dication in the ground and excited electronic states

Ab initio calculations employing the configuration interaction method including Davidson's corrections for quadruple excitations have been carried out to unravel the dissociation mechanism of acetylene dication in various electronic states and to elucidate ultrafast acetylene-vinylidene isomerization recently observed experimentally. Both in the ground triplet and the lowest singlet electronic states of C2H2(2+) the proton migration barrier is shown to remain high, in the range of 50 kcal/mol. On the other hand, the barrier in the excited 2 3A" and 1 3A' states decreases to about 15 and 34 kcal/mol, respectively, indicating that the ultrafast proton migration is possible in these states, especially, in 2 3A", even at relatively low available vibrational energies. Rice-Ramsperger-Kassel-Marcus calculations of individual reaction-rate constants and product branching ratios indicate that if C2H(2)2+ dissociates from the ground triplet state, the major reaction products should be CCH+(3Sigma-)+H+ followed by CH+(3Pi)+CH+(1Sigma+) and with a minor contribution (approximately 1%) of C2H+(2A1)+C+(2P). In the lowest singlet state, C2H+(2A1)+C+(2P) are the major dissociation products at low available energies when the other channels are closed, whereas at Eint>5 eV, the CCH+(1A')+H+ products have the largest branching ratio, up to 70% and higher, that of CH+(1Sigma+)+CH+(1Sigma+) is in the range of 25%-27%, and the yield of C2H++C+ is only 2%-3%. The calculated product branching ratios at Eint approximately 17 eV are in qualitative agreement with the available experimental data. The appearance thresholds calculated for the CCH++H+, CH++CH+, and C2H++C+ products are 34.25, 35.12, and 34.55 eV. The results of calculations in the presence of strong electric field show that the field can make the vinylidene isomer unstable and the proton elimination spontaneous, but is unlikely to significantly reduce the barrier for the acetylene-vinylidene isomerization and to render the acetylene configuration unstable or metastable with respect to proton migration.     

First hexadecavanadate compound: hydrothermal synthesis and characterization of a three-dimensional framework [(Cu(1,2-pn)2)7(V16O38(H2O))2].4H2O

The hydrothermal reaction of V2O5, Cu(CH3COO)2.H2O, 1,2-diaminopropane and [N(CH3)4]OH yields the novel three-dimensional open-framework solid [(Cu(1,2-pn)2)7-(V16O38(H2O))2].4H2O constructed from the new mixed-valence [V16O38(H2O)]7- clusters interconnected through mu 2-[Cu(1,2-pn)2]2+ groups.     

Two-photon ionization thresholds of matrix-assisted laser desorption/ionization matrix clusters

Direct two-photon ionization of the matrix has been considered a likely primary ionization mechanism in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. This mechanism requires that the vertical ionization threshold of matrix materials be below twice the laser photon energy. Because dimers and larger aggregates may be numerous in the early stages of the MALDI plume expansion, their ionization thresholds are important as well. We have used two-color two-photon ionization to determine the ionization thresholds of jet cooled clusters of an important matrix, 2,5-dihydroxy benzoic acid (DHB), and mixed clusters with the thermal decomposition product of DHB, hydroquinone. The thresholds of the clusters were reduced by only a few tenths of an eV compared to the monomers, to an apparent limit of 7.82 eV for pure DHB clusters. None of the investigated clusters can be directly ionized by two nitrogen laser photons (7.36 eV), and the ionization efficiency at the thresholds is low.     

Lanthanum heterocyclic Schiff-base complex initiated ring-opening polymerization of ε-caprolactone

Lanthanum complex supported by the heterocyclic Schiff-base ligand of N-(2-pyridyl)-3,5-di-tert-butyl-salicylaldimine was prepared and employed for the ring-opening polymerization(ROP)ofε-caprolactone(ε-CL).The polymers obtained with this initiator showed a unimodal molecular weight distribution implied that only one active species was present.Mechanism study revealed that the polymerization proceeds via acyl-oxygen bond cleavage.     

Biomimetic Asymmetric Reduction of Quinazolinones with Chiral and Regenerable NAD(P)H Models

A facile approach to chiral dihydroquinazolinone derivatives has been described via biomimetic asymmetric reduction of quinazolinones with chiral and regenerable NAD(P)H models. The utility of this method was demonstrated by a concise synthesis of the bromodomain protein divalent inhibitor.     

Block copolymer from α,ω-dihydroxyl polystyrene and polyethylene glycol

α,ω-Dihydroxyl polystyrene was synthesized by the addition of styrene oxide to polystyryl dianion initiated with sodium naphthalene. Diglyme was found to be an unsuitable solvent for the preparation of low molecular weight compounds. Block copolymerization of the α,ω-dihydroxyl polystyrenes (M?_n = 2250, 3140, and 6200) with poly(ethylene glycols) (M?_n = 404, 1960, and 5650) was pursued by introducing urethane linkages with 4,4′-diphenylmethane diisocyanate. The mechanical, thermal, and viscoelastic properties, solution viscosity, molecular weight distribution, and moisture absorption of the block copolymers obtained were examined. Incorporation of styrene blocks was found to disturb the crystallization and fusion of poly(ethylene glycol) blocks. Films cast from benzene solution were soft and elastic and absorbed up to 5.8% moisture.     

Anchored palladium bipyridyl complex in nanosized MCM-41: a recyclable and efficient catalyst for the Kumada-Corriu reaction

A palladium bipyridyl complex anchored onto nanosized mesoporous silica MCM-41 catalyzed the cross-coupling of aryl iodides or bromides with Grignard reagents to provide the corresponding biaryls in high yields. The reaction proceeded smoothly with an equal molar amount of substrate and Grignard reagent in the presence of 0.2-0.02 mol % of catalyst in THF at 50 °C or under refluxing conditions. The catalyst prepared may be used in a very low percentage, recovered after reaction, and re-used.     

二氯亚甲基锗烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet dichloromethylene germylene and ethylene has been investigated with B3LYP/6-31G＊ method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies for the involved conformations were calculated by CCSD（T）//B3LYP/6-31G＊ method. On the basis of the surface energy profile obtained with CCSD（T）// B3LYP/6-31G＊ method for the cycloaddition reaction between singlet dichloromethylene germylene and ethylene, it can be predicted that the dominant reaction pathway is that an intermediate INT1 is firstly formed between the two reactants through a barrier-free exothermic reaction of 61.7 kJ/mol, and the intermediate INT1 then isomerizes to an active four-membered ring product P2.1 via a transition state TS2, an intermediate INT2 and a transition state TS2.1, in which energy barriers are 57.7 and 42.2 kJ/mol, respectively.     

Determination of Human Alpha-Fetoprotein (AFP) by Solid Substrate Room Temperature Phosphorescence Enzyme-Linked Immune Response Using Luminescent Nanoparticles

Luminescent nanoparticles of silicon dioxide (SiO₂) containing fluorescein isothiocyanate (FITC) with a particle size of 20 nm were synthesized using the Sol–Gel method (abbreviated FITC–SiO₂). FITC–SiO₂ nanoparticles whose surfaces are modified (FITC–SiO₂–S–CH₂COOH) can emit strong and stable solid substrate room temperature phosphorescence (SS-RTP) on acetyl cellulose membranes. When the original color-producing agent (R) in the enzyme-linked immunosorbent assay (ELISA) kits for determination of alpha-fetoprotein (AFP) was substituted with (FITC–SiO₂–S–CH₂COOH), the system maintained good FITC–SiO₂ phosphorescence properties. Furthermore, the phosphorescence intensity enhanced markedly after the ELISA reaction. The relationship between the phosphorescence intensity and the content of AFP obeyed Beer’s law. Based on the facts stated above, a new method for the determination of human AFP by SS-RTP-ELISA (using the luminescent nanoparticle as marker) was established. The linear range of this method is 0.040–16.0 pg of human AFP per spot (sample volume: 0.40 μL spot⁻¹, corresponding concentration: 0.10–40.0 ng mL⁻¹). The regression equation of the working curve is ΔIp = −6.289+18.075 m_AFP (pg spot⁻¹) (r = 0.9960, n = 6). The detection limit (LD) of this method calculated by 3 S_b/k is 6.7 fg spot⁻¹ (corresponding concentration: 17 ng L⁻¹). Compared to the ELISA method using a traditional color-producing agent, the new method exhibited a 34.8 times higher sensitivity and a wider linear range. The method has been successfully applied to the determination of human AFP in serum.     

Different reaction routes found in acid-catalyzed glycosylation of endo- and exo-glycals: competition between Ferrier rearrangement and protonation

Acid-mediated glycosylations of endo- and exo-glycals have been carried out in good to excellent yields, in which a mixture of two products is often obtained resulting from Ferrier rearrangement and protonation. The former reaction exclusively takes place with the t-butyl carbonate or hydroxyl substituent at the C3 position of endo-glycals, while the latter mainly occurs in the glycosylation of exo-glycals with allyl benzyl ether or acetate. In addition to the substituent effect, protecting groups are critical to determine the activity and favored reaction pathway. Furthermore, the method is applicable to O-, C-, and N-nucleophiles.