材料试验机的升级改造及其在教学中的应用

利用现有设备，通过添加数据采集系统和计算机分析处理系统，使试验机得到升级改造，基本达到自动测试的要求。应用于高职学生的实验教学中，对扩大学生的知识面，提高动手能力有较好的效果。     

Synthesis and characterization of liquid crystalline side‐chain block copolymers containing luminescent 4,4′‐bis(biphenyl)fluorene pendants

A series of new liquid crystalline homopolymers, copolymers, and block copolymers were polymerized from styrene‐macroinitiator ( SMi ) and methacrylates with pendent 4,4′‐bis(biphenyl)fluorene ( M1 ) and biphenyl‐4‐ylfluorene ( M2 ) groups through atom transfer radical polymerization (ATRP). The number‐average molecular weights (Mn) of polymers P1 ‐ P4 were 10,007, 14,852, 6,275, and 10,463 g mol^?1 with polydispersity indices values of 1.21, 1.15, 1.31, and 1.22, respectively. All polymers exhibit the nematic phase. The thermal, mesogenic, and photoluminescent properties of all polymers were investigated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4564–4572, 2007     

Synthesis and characterization of wholly aromatic poly(azomethine)s containing donor–acceptor triphenylamine moieties

N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine was synthesized from N‐(4‐nitrophenyl)‐diphenylamine by the Vilsmeier‐Haack reaction. Soluble aromatic poly(azomethine)s (PAMs) were prepared by the solution polycondensation of N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine and aromatic diamine in N‐methyl‐2‐pyrrolidone (NMP) at room temperature under reduced pressure. All the PAMs are highly soluble in various organic solvents, such as N,N‐dimethylacetamide (DMAc), chloroform (CHCl₃), and tetrahydrofuran (THF). Differential scanning calorimetry (DSC) indicated that these PAMs had glass‐transition temperatures (T_gs) in the range of 170–230 °C, and a 10% weight‐loss temperatures in excess of 490 °C with char yield at 800 °C in nitrogen higher than 60%. These PAMs in NMP solution showed UV‐Vis charge‐transfer (CT) absorption at 405–421 nm and photoluminescence peaks around 462–466 nm with fluorescence quantum efficiency (Φ_F) 0.10–0.99%. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of these PAMs can be determined from cyclic voltammograms as 4.86–5.43 and 3.31–3.34 eV, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4921–4932, 2007     

Multiple MIPS 4Kc cores based interrupt controller design and its implementation on HDTV SoC platform

A multiple MIPS 4Kc processor cores based interrupt processing system is introduced. The interrupt controller plays a key role in the high definition television （HDTV） system-on-a-chip （SoC） platform, especially when it is a multiple processor system. Based on a general introduction to the whole HDTV SoC platform, a layered interrupt controller and its implementation are discussed in detail. The proposed scheme was implemented in our FPGA verification board. The results indicate that our scheme is reliable and efficient. Meanwhile, as a functional intellectual property （IP）, the interrupt controller has reusability and expandability with the layered structure.     

数控机床伺服系统故障的维修

列举了数据机床故障实例,介绍了数控机床伺服系统故障的维修。     

唐钢一铁炉料性能及合理搭配的研究

试验研究表明，唐钢一铁烧结矿粒度均匀，具有良好的强度和冶金性能；搭配２５－４０％酸性球团的综合炉料，具有较好的熔滴性能，是合理结构。     

NiAl金属间化合物熔体旋转法制备工艺参数研究

研究了金属间化合物快速凝固薄带的成型过程和影响薄带质量的工艺参数。提出了熔体在喷嘴处进行层流流动的经验关系式，给出了金属间化合物快速凝固薄带制备的最佳工艺参数。     

内含热薄透镜CW色心激光腔的振荡光束特性

运用像镜原理分析三镜折迭腔、四镜折迭腔和四镜8字型环形腔等光学谐振腔的振荡光束特性及其热行为。讨论热效应对谐振腔振荡光束特性的影响规律以及像镜分析方法的精确性,给出谐振腔的热不灵敏条件。     

饲育条件下Semisulcospiens decipiens的生长

在饲育温度条件下研究了Ｓ．ｄｅｃｉｐｉｅｎｓ的生长和产仔数及与饲育水温的关系。结果表明水温在上升期和下降期，新生贝和稚贝的生长速度较快，产仔数也较多．成体贝在水温１１℃～２９℃时，都可产出新生贝，以１８℃～２４℃时产出较多．在高温饲育条件下，成体贝的生长速度缓慢。