Capillary electrochromatographic separation of enantiomers under aqueous mobile phases on a covalently bonded cellulose derivative chiral stationary phase

A chemically bonded cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase (CSP) was prepared by a radical polymerization reaction. The prepared CSP was packed into fused-silica capillaries with inner diameter of 75 microm to perform enantiomer separations in CEC. The electrochromatographic behavior of the CSP was investigated. On the prepared CSP, high EOF could be generated under acidic mobile phases, which represented an advantage for the separation of acidic enantiomers. Several neutral, acidic, and basic enantiomers were resolved on the prepared CSP under aqueous mobile phases. The column efficiencies were between 20,000 and 100,000 plates/m, which were much higher than those of HPLC. In addition, it was observed that the separation of some enantiomers benefited from the adoption of THF as mobile phase modifier.     

Determination of trace rhodium by supramolecular catalytic kinetic spectrofluorimetry of β-CD-rhodium-KBrO3-vanillin salicylhydrazone

A sensitive catalytic kinetic spectrofluorimetric approach for determining ng mL⁻¹ levels of rhodium is presented, and the possible mechanism of the catalytic reaction was investigated. The determination is based on the catalytic property of rhodium to enhance the reaction of o-vanillin salicylhydrazone (OVSH) with potassium bromate in a water-ethanol medium at pH 4.80 and 45 °C. The presence of β-cyclodextrin (β-CD) obviously sensitized the assay due to its high inclusion ability towards OVSH. Under optimized experimental conditions, fluorescence measurements of the β-CD-rhodium-KBrO₃-OVSH catalytic kinetic reaction system were carried out in its fluorescent band centered at λ_ex = 333 nm and λ_em = 476 nm, respectively. The calibration graph was linear over the concentration range of 0.47–100 ng mL⁻¹ with a detection limit of 0.14 ng mL⁻¹. The effect of interferences was discussed, and the results show that the extraction method can be used to separate rhodium from interference species such as iridium. The proposed method, applied to several synthetic mixtures containing rhodium mixed with varying amounts of metal salts, produced satisfactory results.     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。     

制备方法对Mg1.9Al0.1Ni合金储氢性能的影响

文中采用机械合金化(MA)和氢化燃烧法(HCS)制备了Mg1.9Al0.1Ni,通过对它们储氢性能的对比研究发现,MA优于HCS.采用MA制得的Mg1.9Al0.1Ni储氢合金具有较高的活性和高储氢量,对PCT结果进行计算,得出温度和氢平衡压的关系式.Mg1.9Al0.1Ni(MA)553K时100s内吸放氢量分别为2.67和2.54 mass%H.用XRD方法进行物相分析,表明添加适量Al没有改变Mg2Ni的物相结构,由于MA能够制备出纳米晶粒,使得Mg1.9Al0.1Ni合金具有更好的储放氢动力学性能.     

工科学校本科生科研训练与实践——以节能减排大赛为例

Scientific research training is an essential part of undergraduate learning, which plays an important role in improving students' knowledge utilization and scientific literacy. Taking the participation process of "Energy conservation and emission reduction competition" as an example, this paper briefly introduces the undergraduate scientific research training of students majoring in polymer materials and engineering from their own perspective, and the way to combine the discipline and school characteristics to reflect the thinking of engineering students in scientific research and practical application.     

杂多配合物抗流感病毒活性

杂多配合物抗流感病毒活性刘杰王丽君＊＊周云山王恩波＊（东北师范大学化学系长春１３００２４；＊＊吉林医学院吉林）关键词杂多化合物，流感病毒，活性１９９７－０７－０９收稿，１９９７－０９－０１修回国家自然科学基金资助课题杂多化合物的药物化学已被广泛关注［...     

Linear alkyl benzene sulphonate (LAS) degradation by immobilized Pseudomonas aeruginosa under low intensity ultrasound

We studied the LAS degradation of immobilized Pseudomonas aeruginosa with low-intensity ultrasonic and the influence of original LAS concentration, pH, rotary velocity and different conditions of low-intensity ultrasonic irradiation on the degradation of LAS. In our experiment, the degradation rate of LAS was the main index. We found that low-intensity ultrasonic irradiation could improve the metabolism of microorganism cells and promote the LAS biodegradation of immobilized cells. In the experiment, 50 mg/l LAS were used to simulate wastewater, and low-intensity ultrasonic was considered. We found the influence was obvious, and the optimal degradation rate was acquired when the conditions of ultrasonic were frequency 24 kHz, power 8 W, stimulation time 5 s, intermissive time 30 s, and total time 10 min. The LAS degradation rate of immobilized cells with ultrasonic were respectively 40% and 9.5% higher than that of the suspending cells and immobilized cells without irradiation.     

微孔和介孔材料中的热化学

这篇论文综述了美国加州大学戴维斯分校科学院院士Navrotsky课题组多年来在多孔材料上取得的一系列热化学研究结果。讨论了热化学对微孔、介孔材料的结构稳定性和合成过程的影响。借助多种测热手段对影响骨架结构的热焓、热熵和自由能进行了系统的测量和计算。研究数据表明一系列纯硅分子筛、介孔材料和磷酸铝多孔材料同相应的石英相和块磷铝矿相相比能量上最多只高出15 kJ·mol-1。一系列纯硅分子筛的熵值比石英相高出3.2—4.2 J·K-1·mol-1；在0—12.6 J·K-1·mol-1范围内相对应的自由能几乎没有差别。因此，对不同微孔、介孔材料，其骨架结构在能量上是几乎没有区别的。另外，本文通过介绍一种新型测热方法——原位测热，揭示了分子筛合成过程中的动力学和成核/结晶机理。     

Synthesis and antitumor activity of camptothecin- 4β-triazolopodophyllotoxin conjugates

Abstract

Two new compounds (9 and 10) having a camptothecin (CPT) analog conjugated to the 4β-azido-4-deoxypodophyllotixin analog by untilizing the copper-catalyzed azide-alkyne cycloadditon (CuAAC) reaction, and were evaluated for their cytotoxicity against a panel of five human cancer cell lines (HL-60, SMMC-7721, A-549, MCF-7 and SW480) using the MTT (3-(4,5-dimethyl-thiahiazo-2-yl)-2,5-diphenyltetrazolium bromide) assay. Two novel conjugates shown weak cytotoxicity, compound 10 showed highly potent against HL-60 cell line tested, with IC₅₀ value 17.69?±?0.19?μM. This compound suggested its potential as anticancer agents for further development.

     

凹坑板式空气预热器的传热特性及多目标优化

以全焊接型凹坑板式空气预热器为对象,基于最优设计试验方案,运用Workbench Fluent软件数值模拟凹坑板片特征结构参数对传热流阻性能的影响。基于参数敏感度分析,得到单因素作用下对传热流阻性能的影响程度为凹坑的纵向间距>长轴>横向间距>深度。基于响应曲面法分析,得到多因素协同作用时,凹坑之间的结构参数横纵距对性能影响比凹坑自身的结构参数深径比大。基于遗传算法以摩擦因子f最小、努塞尔数Nu与综合换热因子J_F最大为优化目标,得到给定范围内的3组较优结构组合。