催化反应制备碳化硅纳米粉体的密度泛函理论计算及实验研究

以Si_(55),Si_(43)M_(12)和Si_(37)M_(18)(M=Fe,Co或Ni)团簇为模型,采用密度泛函理论(DFT)研究了Fe,Co及Ni纳米团簇催化硅粉转化为SiC的机理.计算结果表明,Fe,Co及Ni纳米催化剂先与Si形成合金,拉长并弱化Si—Si键的强度,起到活化Si粉的作用;合金的形成有利于C原子的吸附及Si原子和C原子间的反应;Fe的催化能力强于Co和Ni.在此基础上,以Si粉和酚醛树脂为原料,以Fe,Co及Ni硝酸盐为催化剂前驱体,通过微波加热反应制备了3C-SiC纳米粉体.研究了催化剂种类、反应温度、催化剂用量和反应时间等对制备3C-SiC纳米粉体的影响.结果表明,催化剂Fe,Co和Ni的加入均可显著降低3C-SiC的合成温度.当以2.0%(质量分数)的Fe为催化剂时,Si粉在1100℃下反应30 min后即可全部转化为3C-SiC纳米粉体;而在相同条件下,无催化剂时Si粉的完全转化温度为1250℃;Fe的催化效果优于Co和Ni,与DFT计算结果吻合.     

In-tip nanoreactors for cancer cells proteome profiling

Mass spectrometry (MS)-based proteome profiling is essential for molecular diagnostics in modern biomedical study. To date, sample preparation including protein extraction and proteolysis is still very challenging and lack of efficiency. Recently tips-based sample preparation protocols exhibit strong potentials to achieve the goal of “a proteome in an hour”. However, in-tip proteolysis is still rarely reported and far from ideal for dealing with complex bio-samples. In this work, nanoreactors encapsulated micropipette tips were demonstrated as high performance devices for fast (∼minutes) and multiplexing proteolysis to assist the profiling of cancer cells proteome. Nanoporous silica materials with controlled pore size and surface chemistry were prepared as nanoreactors and encapsulated in micropipette tips for efficient in situ proteolysis. The as-constructed device showed desirable sensitivity (LOD of 0.204 ± 0.008 ng/μL and LOQ of 0.937 ± 0.055 ng/μL), selectivity, stability (two months under −20 °C), reusability (at least 10 times), and little memory effect in MS based bottom-up proteomic analysis. It was used for comprehensive protein mapping from cancer cell lines. The number of identified proteins was increased by 18%, 22%, 52%, and 52% dealing with HepG2, F56, MCF7, and HCCLM3 cancer cells, compared to traditional in-solution proteolysis based bottom-up proteomic strategy. With the enhanced performance, our work built a novel, efficient and miniaturized platform for facile proteomic sample preparation, which is promising for advanced biomarkers discovery in biomedical study.     

Enhancing effect of boron trifluoride diethyl etherate electrolytes on capacitance performance of electropolymerized poly[poly(<Emphasis Type="Italic">N</Emphasis>-vinyl-carbazole)] films

In this paper, poly[poly(N-vinyl-carbazole)] (PPVK) films electrodeposited in tetrahydrofuran (THF) containing 12 % boron trifluoride diethyl etherate (BFEE) were studied as electrode active material for supercapacitors. The morphology and thermal property were characterized by SEM, atomic force microscopy (AFM), and thermogravimetry (TG), respectively. The electrochemical capacitive behaviors of the PPVK films were also investigated by cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy. The electrochemical results showed that the specific capacitance of PPVK films in CH₃CN solution was about 126 mF cm^?2 at 1.5 mA cm^?2 and the capacitance retention was only 14.4 % after 1000 cycles. It was exciting to improve the specific capacitance up to 169.3 mF cm^?2 at 1.5 mA cm^?2 and to make the cyclic stability increase to 81.8 % capacitance retention after 5000 cycles when the equivalent BFEE was added into the CH₃CN solution containing 0.05 M Bu₄NBF₄ electrolyte. These results clearly demonstrated that BFEE was an efficient promoter for the enhancement of the capacitance performance of PPVK films. Therefore, with the help of BFEE electrolyte, the PPVK films have potential application as capacitive materials in high-performance energy storage devices.     

Exploratory Purification of Compounds from Aqueous Extracts of <Emphasis Type="Italic">Pinus massoniana</Emphasis> Lamb. by Two-Dimensional Preparative Liquid Chromatography

An off-line orthogonal two-dimensional preparative liquid chromatography method was developed for isolation of high-purity compounds from aqueous extracts of Pinus massoniana Lamb., which has efficient therapeutic properties in recipes of traditional Chinese medicines. A polar-enhanced reversed-phase (RP) column, XAqua C18 was selected for the first-dimensional separation. A HILIC column and a hydrophobic RP column were both explored in the second dimension. The preparation results indicated hydrophilic RP × HILIC mode would provide better separation efficiency for polar complexes, i.e., the second-dimensional separation was finished in less than 30 min and high-purity compounds were obtained. In this work, 16 fractions were collected efficiently in the first dimension with a recovery up to 96%, and six compounds with high purity and enough quantity were identified by NMR and high resolution mass spectrometry, including epicatechin, betuloside, taxifolin-3-O-xyloside, cedrusin-4-O-glucoside, massonianoside C and massonianoside D, and five are glycosides, including flavonoid glycosides, lignanoid glycosides and an arylbutanoid glycoside. Betuloside was first reported in the preparation of Pinus massoniana Lamb. This work demonstrated a flexible strategy of compromise in between time and resolution for selecting solvent and column to enhance preparative efficiency of polar complex systems.     

Preparation and characterization of anion‐exchange membranes derived from poly(vinylbenzyl chloride‐co‐styrene) and intercalated montmorillonite

In this paper, three organic intercalating agents containing cations [hexadecyl trimethyl ammonium bromide (CTAB), poly(acrylamide‐co‐diallyldimethylammonium chloride), and quaternized polyethyleneimine] are used to prepare intercalated montmorillonites (MMT) by ion‐exchange method. Then the modified MMTs are doped with vinylbenzyl chloride and styrene copolymer [poly(vinylbenzyl chloride‐co‐styrene)] for fabricating composite anion‐exchange membranes (AEM). Fourier transform infrared, X‐raydiffraction, thermogravimetric analysis, scanning electron microscopy, and Mastersizer laser particle size analyzer are employed to characterize the structure and morphology of MMTs and AEMs. The successful intercalation of MMTs is approved, and the MMT intercalated by CTAB shows an interlayer distance of 2.31 nm. The properties of the composite membranes including water uptake, mechanical property, and ionic conductivity are investigated. Among all the AEMs, the composite membrane containing MMT sheets with CTAB demonstrates better compositive performances. It presents an ionic conductivity of 2.09 × 10^?2 S cm^?1 at 80°C and good alkaline solution stability. Copyright © 2016 John Wiley & Sons, Ltd.     

三元磁性氮化碳复合光催化剂的制备和表征及其在可见光下去除四环素的应用

g-C3N4作为一种新型有机半导体材料,由于其良好的化学稳定性和可直接利用可见光等优点已经引起了人们的广泛关注,近年来已逐渐将其应用于光催化氧化环境污染物等方面.同时在实际应用中因其光能利用率低、难回收、电子-空穴易复合等缺点也受到了限制.研究发现将四氧化三铁与氮化碳相结合,可以有效提高复合催化剂的光催化活性,而且可回收再利用很大程度上降低成本.采用光催化氧化技术处理实际环境污染物废水时,将光催化剂投入到废水中后,环境及水体的温度往往会对催化剂的催化活性产生一定的影响,导致无法实现最佳的光催化处理效果.制备一种催化活性不受外界温度影响的智能光催化材料是当今面临的一项挑战.我们研究制备了一种具有温度响应的磁性复合光催化剂PNIPAM/Fe3O4/g-C3N4,其可根据外界温度的不同而表现出不同的光催化活性.温敏型聚合物PNIPAM是一类结构、性能和形态随温度变化而做出响应的功能材料,将光催化材料与温敏型PNIPAM智能高分子材料相结合,实现了智能催化的效果.PNIPAM温敏聚合物在水溶液中存在一个低临界溶解温度,其可以作为开关,通过改变温度实现对光催化过程的控制,达到过程智能化的效果.随着温度的改变,温敏聚合物的溶解状态在临界点附近会发生变化.不同温度对催化速率影响很大,当温度升高到临界值以上,催化反应速率降低很多;当温度降低到临界值以下,催化活性随之升高.这样不仅随时控制反应的进行,还可以通过改变温度控制反应速率.同时,温敏聚合层又相当于一个保护层,可以增强其抗腐蚀能力,提高对内部光催化材料的保护,进而提高其稳定性.众所周知四环素等抗生素类药物生产废水,属于高浓度有机废水,具有一定的毒性,一般较难处理.我们将制备的PNIPAM/Fe3O4/g-C3N4复合光催化材料用于四环素废水的处理取得了很好的效果.XRD,FT-IR、Raman等表征手段充分证明了我们所制备的三元复合材料PNIPAM/Fe3O4/g-C3N4的组成及各个组分的存在.并对PNIPAM/Fe3O4/g-C3N4复合光催化剂在不同温度(20和45°C)条件下处理四环素废水进行了系统的研究,从20和45℃的吸附曲线结果可以看出,低温时PNIPAM/Fe3O4/g-C3N4的吸附性较强,高温时吸附较差.同时PNIPAM/Fe3O4/g-C3N4低温时具有较高的催化活性,高温时催化活性较低.经过分析可知这种对温度响应的特殊性能与PNIPAM的亲水及疏水性密切相关.另外,通过对PNIPAM/Fe3O4/g-C3N4复合材料的VSM测试及5次循环实验测试可以看出,PNIPAM/Fe3O4/g-C3N4复合材料由于Fe3O4的引入而表现出较好的磁性,且在外加磁铁的作用下很容易实现分离回收.另外,PNIPAM/Fe3O4/g-C3N4在经过5次重复利用后其催化活性几乎没有减退,说明催化剂具有很好的稳定性.另一方面,说明我们的复合光催化剂在工业废水等污染治理方面有一定的潜在应用价值.     

单原子催化剂的制备、表征及催化性能

单原子催化剂(SACs)是指金属以单原子形式均匀分散在载体上形成的具有优异催化性能的催化剂.与传统载体型催化剂相比,SACs具有活性高、选择性好及贵金属利用率高等优点,在氧化反应、加氢反应、水煤气变换、光催化制氢以及电化学催化等领域都具有广泛应用,是目前催化领域的研究热点之一.常见的SACs制备方法有共沉淀法、浸渍法、置换反应法、原子层沉积法以及反奥斯瓦尔德熟化法等.实验及理论研究表明,单原子催化剂高的活性和选择性可归因于活性金属原子和载体之间的相互作用及由此引起的电子结构改变.载体是影响单原子催化剂性能的重要因素之一.目前常用的SACs载体有金属氧化物、二维材料和金属纳米团簇等,本文着重综述了这三种负载型SACs的制备、表征、催化性能及催化机理,并概述了SACs未来可能的发展方向和应用.研究表明,共沉淀法、湿浸渍法和反奥斯瓦尔德熟化法等方法可用来制备氧化物负载的SACs.高角环形暗场像-扫描透射电子显微镜(HAADF-STEM)表明金属是以单原子形式均匀分散在载体上,近边X射线吸收精细结构(XANES)结果表明金属原子与载体之间存在着强相互作用.实验和理论研究均表明该类催化剂在CO氧化反应、水煤气转化及乙炔加氢生成乙烯等反应中具有高的催化活性和稳定性.采用化学气相沉积法和原子层沉积法等方法可以将金属原子稳定地负载在具有缺陷活性位点的石墨烯、MXene及六方氮化硼等二维材料上并相应制备出SACs.X射线吸收精细结构谱(EXAFS)和XANES分析表明样品中金属以单原子形式存在,而且金属原子与载体之间也存在着强相互作用,理论计算表明金属原子与二维载体之间的电荷转移是SACs活性高的主要原因.置换反应法和连续还原法是制备溶胶型SACs的有效方法,其中置换反应法可将活性金属原子原位组装在金属模板团簇的顶点位置,连续还原法可将活性原子负载于金属模板团簇的表面.DFT计算表明活性原子和金属模板团簇之间存在电荷转移效应,这是溶胶型SACs具有非常高的催化活性的主要原因.SACs下一步的研究方向可能是:(1)研究开发新型SACs,尽可能提高催化剂中活性金属原子的含量;(2)深入研究SACs的结构、活性以及催化机理之间的关系;(3)尝试将SACs大规模应用于工业催化.     

单原子催化剂M1/FeOx(M=Pt,Fe)的理论研究:CO氧化反应

负载型纳米贵金属催化剂是用于多相催化反应的重要的催化剂之一,也是各国催化科学与技术研发的重点,其工业应用也越来越广泛.理论和实验的研究结果均表明,当载体表面的金属粒子尺寸减小至亚纳米级乃至更小的低配位、不饱和的原子团簇时,它们常常成为诱发催化反应的活性中心,呈现更高的催化活性和选择性.将负载的金属尺寸由纳米量级减小至分散的金属团簇甚至单原子而使每个原子成为反应的活性位点已成为研究的重点.最近,由张涛等首次合成的单原子催化剂(SAC)Pt1/FeOx引起了国内外催化及表面科学工作者的极大关注.单原子催化剂作为连接均相催化剂和多相催化剂的桥梁,不仅具有非均相催化剂的稳定、易于与反应体系分离、易表征等优点,而且具有均相催化剂活性中心结构均一、活性中心原子利用率百分之百等优点.一方面,单原子催化剂给多相催化领域注入了新的活力,另一方面也更有利于运用量子与计算化学的研究方法建立与实验相匹配的理论模型并从原子水平上进一步理解多相催化反应的微观作用机理.实验和理论的研究结果表明,其它单原子催化剂如Ir1/FeOx,Au1/FeOx和Ni1/FeOx催化CO氧化反应表现出不同的活性.然而,底物FeOx中的Fe同样是第VIII族中的3d过渡金属,却在低温下对CO氧化反应没有催化活性.我们围绕这一问题,重点研究了底物FeOx在负载单原子Pt1前后催化CO氧化的反应机理和活性,解释了单原子催化剂Pt1/FeOx相比于底物FeOx为何具有如此高的催化活性的原因.我们采用Vienna Ab-initio Simulation Package(VASP)从头算模拟软件和密度泛函理论(DFT)的广义梯度近似(GGA)进行了理论计算.其中,选择PBE泛函描述体系的交换关联相互作用,用投影缀加波(PAW)赝势基组方法描述体系中的电子和离子实之间的相互作用,对Fe原子采用了DFT+U方法进行d电子强相关校正,并使用Dimer计算方法搜寻反应过渡态.研究结果表明,底物FeOx中氧空位的再生伴随第二个CO2分子从催化剂表面脱附的过程需要较高的活化势垒(1.09 eV),这一过程是整个CO氧化反应的决速步.与此相比较,Pt1/FeOx催化剂中,由于Pt原子代替了表面Fe原子,导致电子结构及性质的显著变化,有利于CO的活化、氧化和CO2的脱附.我们从电子能量态密度(DOS)和Bader电荷分析及模型分子团簇的轨道相互作用的角度进一步分析了两种催化剂存在差异的本质;揭示了单原子催化剂Pt1/FeOx中Pt1和底物FeOx之间的相互作用的机理及催化剂表面Pt单原子在催化反应过程中的关键作用.     

(S)-3-羟基四氢呋喃的合成研究进展

综述了(S)-3-羟基四氢呋喃制备方法的研究现状,重点阐述了三种合成方法：（1）手性底物合成法;（2）手性催化剂不对称合成法;（3）酶催化不对称合成法。分析了不同制备方法的优劣,并对其未来发展进行了展望。参考文献45篇。     

纳米氧化铈在催化氧化木质素制备芳香化合物中的应用研究

木质素是自然界中唯一大规模可再生的含芳环聚合物.通过催化氧化的方法,定向解聚木质素得到芳香类化合物,具有非常重要的价值.近年来,氧化铈作为载体在木质素的多相催化氧化反应中表现较好性能.然而,对于氧化铈直接作为催化剂,并探讨其纳米结构与性能之间的研究未见报道.研究结果表明:纳米氧化铈直接作为催化剂时,对于木质素的催化氧化反应具有较好的性能,顺序为氧化铈纳米八面体纳米四方体纳米球纳米棒.纳米八面体表现出最优的催化性能,以其作为催化剂,对乙醇木质素进行催化氧化,得到了大量芳香酸及其酯类化合物.