分工创新——放大技术创新效应的必然选择

技术创新是为生产服务的,只有把技术创新的成果转化为生产力,一国产品在国际市场的竞争力才能提高;对我国来说,技术创新的成果并不少,但产品在国际市场的竞争力却不强,主要原因是技术创新的应用不充分;对我国企业来说,主要的短板是分工创新不够。为此,必须通过分工创新以转化技术创新的成果。     

A comparison of the Medieval Warm Period, Little Ice Age and 20th century warming simulated by the FGOALS climate system model

To compare differences among the Medieval Warm Period (MWP), Little Ice Age (LIA), and 20th century global warming (20CW), six sets of transient and equilibrium simulations were generated using the climate system model FGOALS_gl. This model was developed by the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of Atmospheric Physics, Chinese Academy of Sciences. The results indicate that MWP warming is evident on a global scale, except for at mid-l...     

Brazing of micrograin-filled quartz fiber reinforced silica composites and Invar using Ag-21Cu-4.5Ti alloy

Brazing of quartz fiber reinforced silica composites (QFSC) to Invar alloy was carried out in a vacuum at 1173 K for 10 min using Ag-21Cu-4.5Ti metal filler.Experiments indicated that composites prefilled with CaCO3 micrograins had good wettability.The CaCO3 decomposed to CaO during brazing.After brazing,a joint of structure QFSC/3CaO·2SiO2+Ti3O5+Fe2Ti+NiTi+Ag(s,s)+ Cu(s,s)/Invar was established.The shear strength of the brazed joint reached 11.6 MPa at room temperature,which is about five times the shear strength of that obtained without surface filling.     

Ethylene-induced nitric oxide production and stomatal closure in <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis> depending on changes in cytosolic pH

We investigated changes in cytosolic pH and nitric oxide (NO) during ethylene-induced stomatal closure in Arabidopsis thaliana using pharmacological, laser scanning confocal microscopy (LSCM), and spectrophotography techniques. Treatment with ethephon (a direct source of ethylene when applied to plants) and 1-aminocycloaminopropane-1-carboxylic acid (ACC, an ethylene precursor) resulted in a rapid accumulation of NO and cytosolic alkalinization in guard cells. Acetic acid (a weak acid) and sodium orthovanadate (NaVO3; a plasmalemma H+-ATPase inhibitor) reduced stomatal closure induced by ethylene and blocked ethylene-induced activity of nitrate reductase. However, 2-(4-carboxyphenyl)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide (cPTIO), a NO scavenger, had no effect. These results suggest that NO production is downstream of the rise in cytosolic pH in A. thaliana.     

Morphology-controllable solvothermal synthesis of nanoscale LiFePO4 in a binary solvent

LiFePO4(LFP) nanobars,microplates and nanorods have been selectively synthesized via a solvothermal method in a water-ethylene glycol(EG) binary solvent with H3PO4,LiOH·H2O,and FeSO4·7H2O as starting materials.The morphology and size of the as-obtained LFP products can be deliberately controlled by varying the volume ratio of EG to water.The formation mechanism and electrochemical properties of different LFP morphologies have been investigated.With carbon coating,the Li-ion diffusion coefficients of LFP nanorods,nanobars and micro-plates are 2.58×10-9,2.91×10-10,and 7.22×10-10 cm2 s-1,respectively.For the carbon-coated nanorods,excellent rate capability and cyclability were attained.At 5 C,the capacity was 141 mAh g-1 for the first cycle and maintained 120 mAh g-1 after 100 cycles;at 10 C,the capacity was still as high as 132 mAh g-1.     

迷宫式蒸汽调节阀的级数计算方法研究

结合流体力学和热力学理论分析了蒸汽通过迷宫式调节阀的节流过程,推导出了适用于蒸汽工况的级数理论计算公式,并采用数值模拟方法分析了扩张系数和串并联结构对迷宫流道的级数计算及内部流动的影响规律。研究结果表明：在相同工况下,扩张系数越小,需要的级数越多;级数越多,压降曲线越平稳、平均流速越小、过热度越高,即节流过程越安全;在级数满足降压需要的条件下,串并联结构能有效降低迷宫流道的出口动能和马赫数。采用本文推导的理论公式计算得到的级数与实际值接近,且该公式对串联和串并联结构的迷宫流道均适用,可为迷宫式蒸汽调节阀设计过程中的级数计算提供参考。     

Prescribing curvature problem of Bakry-Émery Ricci tensor

We consider the problem of deforming a metric in its conformal class on a closed manifold, such that the k-curvature defined by the Bakry-mery Ricci tensor is a constant. We show its solvability on the manifold, provided that the initial Bakry-mery Ricci tensor belongs to a negative cone. Moveover, the Monge-Ampère type equation with respect to the Bakry-mery Ricci tensor is also considered.     

Bifurcation and synchronization of synaptically coupled FHN models with time delay

This paper presents an investigation of dynamics of the coupled nonidentical FHN models with synaptic connection, which can exhibit rich bifurcation behavior with variation of the coupling strength. With the time delay being introduced, the coupled neurons may display a transition from the original chaotic motions to periodic ones, which is accompanied by complex bifurcation scenario. At the same time, synchronization of the coupled neurons is studied in terms of their mean frequencies. We also find that the small time delay can induce new period windows with the coupling strength increasing. Moreover, it is found that synchronization of the coupled neurons can be achieved in some parameter ranges and related to their bifurcation transition. Bifurcation diagrams are obtained numerically or analytically from the mathematical model and the parameter regions of different behavior are clarified.     

ClO3--SO32--Rh6G-SDBS体系的化学发光及其用于亚硫酸根测定

Based on the micelle synergism mechanism, a chemiluminescence （CL） flow system for the determination of sulfite was described. The CL signal generated from the reaction of chlorate with sulfite in acidic solution was very weak, while the interfusion of sodium dodecylbenzenesulfonate （SDBS） resulted in a highly chemiluminescent intensity. The major goal of this work was to investigate and develop the SDBS rnicelle synergetic CL system. The mechanism was proposed and proved by spectrometry. The results indicated that the unique structure of SDBS micelles prorooted the aggregation of rhodamine 6G （Rh6G） and a much easier energy transfer, leading to a marked shift to red in the CL emission. This CL system was developed for the determination of sulfite and the concentration of sulfite was proportional to the CL intensity in the range of 5.0× 10^-8--1.0× 10^-5 mol/L with the detection limit of 1.7×10^-8 mol/L （S/N=3）. The relative standard deviation was 3.3% for 1.0×10^ 6 mol/L sulfite solution with eleven repeated measurements. This method was successfully applied to the determination of sulfite in powder sugar.