Intense Green Upconversion Luminescence in Er^3＋：Yb^3＋ Codoped Fluorophosphate Glass Ceramic Containing SrTe5O11 Nanocrystals

Er^3＋ ：Yb^3＋ codoped tellurite-fluorophosphate （TFP） glass ceramic exhibits much stronger upconversion luminescence. The intensity of the 540nm green light and 651 nm red light of the TFP glass ceramic is 120 times and 44 times stronger than that of the fluorophospahte （FP） glass, respectively. XRD analysis shows that the nanocrystal in TFP glass ceramic is SrTe5O11. TFP glass ceramic also displays much higher upconversion fluorescence lifetime and crystallization stability. The narrow and strong peak at 540nm is very ideal for practical upconversion luminescence realization. This work is a new trial for exploring non-PbF2 involved nanocrystal upconversion glass ceramics.     

Reduced-temperature ordering of FePt nanoparticle assembled films by Fe30Pt70/Fe3O4 core/shell structure

In this paper, Fe30Pt70/Fe3O4 core/shell nanoparticles were synthesized by chemical routine and the layered polyethylenimine （PEI）-Fe30Pt70/Fe3O4 structure was constructed by molecule-mediated self-assembly technique. The dimension of core/shell structured nanoparticles was that of 4nm core and 2 nm shell. After annealing under a flow of forming gas （50%Ar2＋30%H2） for 1 h at or above 400℃, the iron oxide shell was reduced to Fe and diffused to Pt-rieh core, which leaded to the formation of L1. phase FePt at low temperature. The x-ray diffraction results and magnetic properties measurement showed that the chemical ordering temperature of Fe30Pt70/Fe3O4 core/shell nanoparticles assembly can be reduced to as low as 400℃. The sample annealed at 400℃ showed the eoereivity of 4KOe with the applied field of 1.5T. The core/shell structure was suggested to be an effective way to reduce the ordering temperature obviously.[第一段]     

Determination of Fatty Acid Methyl Esters in Biodiesel Produced from Yellow Horn Oil by LC

A simple and accurate HPLC method with refractive index detection was developed to determine the main fatty acid methyl esters in biodiesel produced from yellow horn oil. Methyl linoleate, methyl linolenate, methyl arachidate, methyl stearate, methyl palmitate and methyl oleate were separated on a HIQ SIL C18W column using methanol as mobile phase. The method has good repeatability and precision, the intraday and interday RSD for both retention time and peak area was less than 3.2%. The LOD (S/N = 3) and LOQ (S/N = 9) were less than 0.004 and 0.015 mg mL⁻¹, respectively.     

Syntheses of chiral 1,3-disubstituted tetrahydro-β-carbolines via CIAT process: highly stereoselective Pictet–Spengler reaction of d-tryptophan ester hydrochlorides with various aldehydes

A highly stereoselective Pictet–Spengler reaction of d-tryptophan methyl ester hydrochloride 1-HCl with various aldehydes via a CIAT (crystallization-induced asymmetric transformation) process is described. It was revealed that the CIAT process should be performed in a mixed solvent of nitromethane and toluene, and a fine tuning of the ratio of nitromethane and toluene for each epimer mixture of 2-HCl was necessary in order to get as high yields and stereoselectivities as possible. Enantiomerically pure cis (or trans) 1,3-disubstituted tetrahydro-β-carbolines 2a–2v were obtained by recrystallization or flash chromatography after neutralization of the corresponding hydrochloride salts cis-2-HCl or trans-2-HCl.     

自旋轨道耦合Su-Schrieffer-Heeger原子链系统的电子输运特性

在Su-Schrieffer-Heeger (SSH)原子链中,电子在胞内和胞间的跳跃依赖于其自旋时,即SSH原子链存在自旋轨道耦合作用时,存在不同缠绕数的非平庸拓扑边缘态.如何探测自旋轨道耦合SSH原子链不同缠绕数的边缘态是一个重要问题.本文在紧束缚近似下研究了自旋轨道耦合SSH原子链的非平庸拓扑边缘态性质及其零能附近的电子输运特性.研究发现四重和二重简并边缘态的缠绕数分别为2和1;并且仅当源极入射电子的自旋被极化(铁磁电极)时,自旋轨道耦合SSH原子链在零能附近的电子输运特性才能反映其边缘态的能谱特性.尤其是,随着自旋轨道耦合SSH原子链与左、右导线之间的耦合强度由弱到强改变,对于缠绕数为2的四重简并边缘态,入射电子在零能附近的透射峰数目将从4个变为0;而对于缠绕数为1的二重简并边缘态情形,其透射峰数目将从2个变为0.因此,在源极为铁磁电极的情形下,通过观察自旋轨道耦合SSH原子链在零能附近电子共振透射峰的数目随着其与左、右导线之间耦合强度的变化,来探测其不同缠绕数的边缘态.上述结果为基于电子输运特性探测自旋轨道耦合SSH原子链不同拓扑性质的边缘态提供了一种可选择的理论方案.     

α-Fe2O3空心球的水热法制备及其对苯酚的吸附性能

以铁氰化钾、磷酸二氢铵等为反应物,采用水热法合成了α-Fe₂O₃空心球,并用XRD,TEM,FESEM(场发射扫描电镜)、UV-Vis和低温氮吸附脱附对其进行了表征。结果表明,α-Fe₂O₃空心球直径在200～560 nm之间,其BET比表面积为80 m²·g^-1,平均孔径为8.5 nm。考察了反应时间、反应物用量和反应温度等对α-Fe₂O₃空心球形貌和大小的影响,提出了其可能的形成机理。研究了室温下α-Fe₂O₃空心球吸附苯酚的性能,吸附达平衡时,其吸附苯酚的量达97 mg·g^-1。     

Synthesis of phenothiazine-corrole dyads: the enhanced DNA photocleavage properties

Three new phenothiazine-corrole dyads were prepared by the reaction of phenothiazine-10-carbonyl chloride and mono-hydroxyl triaryl corrole in the presence of DBU. As compared to corrole monomer, these phenothiazine-corrole dyads exhibit significant enhanced DNA photocleavage activity as compared to corrole monomer precursors.     

Stripping chronopotentiometric analysis of cysteine on nano-silver coat polyquercetin–MWCNT modified platinum electrode

Silver nanoparticles coat polyquercetin (Qu) and multi-walled carbon nanotube (MWCNT) complex films were prepared using an electrochemical coupling strategy on platinum electrode (Ag/Qu/MWCNT/Ch/Pt). The new composite material was characterized by means of field emission scanning electron microscopy, X-ray photoelectron spectroscopy spectra, X-ray diffraction, and electrochemical techniques, which confirmed that polyquercetin plays an important role to obtain a great deal of uniformly dispersed silver nanoparticles and MWCNT complex film with a diameter of 10 ± 6 nm. The resulting Ag/Qu/MWCNT/Ch/Pt electrode shows a significant electrocatalysis for the redox of cysteine (CysH). The stripping chronopotentiometric analysis of CysH has been successfully used with a satisfying effect. A linear range of 1 × 10⁻¹⁰ to 9 × 10⁻⁸ M was obtained with a detection limit of 3 × 10⁻¹¹ M (3σ) and sensitivity of 35 μA/nM. The films were also robust, surviving up to 100 consecutive cyclic voltammograms and sonication.     

重质油胶体聚集结构的耗散粒子动力学模拟

重质油是以沥青质为胶核分散于饱和油分中形成的极其复杂的胶体体系.本文采用耗散粒子动力学(DPD)方法研究重质油的胶体结构及其影响因素.根据重质油各组分的分子结构特征,构建了描述重质油组分的粗粒化模型化合物.模拟结果表明,本文构建的粗粒化模型能很好地反映重质油的胶体聚集结构.沥青质分子结构对胶体聚集结构有序性有显著影响,较高稠合程度的芳香环结构将使胶束结构有较高的有序性,烷基侧链则表现出分散作用.重质油中的胶质具有胶溶作用,胶质与沥青质的浓度比存在一个极限,当小于这个极限时,重质油将出现聚沉.     

一种新型纺锤状α-Fe_2O_3纳米晶的合成、表征及其表面性能(英文)

合成了一种新型的具有单晶结构的α-Fe2O3纳米晶(NFO-1).在我们的合成方法中,样品的形貌和结构在低反应浓度体系中运用无机盐和有机模板进行双重调控,同时用溶剂挥发诱导自组装(EISA)来加速反应和在不改变形貌结构的前提下获得高产率样品.所得α-Fe2O3纳米晶的形貌和结构对其表面修饰功能有明显的影响,NFO-1因其特殊的纺锤状形貌而与表面功能试剂(多巴胺)之间的化学作用有明显的增强.并且,本文所描述的合成方法同样适用于其他过渡金属氧化物纳米单晶的合成.我们预期,这种方法可为新型纳米材料的合成提供新的途径.