Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

Interface Optical Phonon Modes and Frohlich Electron-Phonon Interaction Hamiltonian in a Multi-shell Spherical Nanoheterosystem

Under dielectric continuum approximation, interface optical (IO) phonon modes and the Frohlich electron-IO phonon interaction Hamiltonian in a multi-shell spherical nanoheterosystem were derived and studied. Numericalcalculations on three-layer and four-layer CdS/HgS spherical nanoheterosystems have been performed. Results revealthat there are four IO phonon modes for the three-layer system and six IO phonon modes for the four-layer system.On each interface, there are two IO phonon modes, the frequency of one is between WTO,CdS and WLO,CdS, and that ofthe other is between WTO,HgS and WLO,HgS. With the increasing of quantum number l, the frequency of each IO modeapproaches one of the two frequency values of the single CdS/HgS heterostructure, and the potential for each IO modeis more and more localized at a certain interface, furthermore, the coupling between the electron-lO phonons becomes weaker.     

溃坝问题的间断有限元方法

本文研究90年代初提出的Runge-Kutta间断Galerkin有限元方法，给出该方法的精度分析，通过经典算例验证该方法处理间断问题、捕捉锐利波形的能力，并将其推广到求解浅水问题．针对坝底无摩擦，无坡度的理想情形进行讨论，给出方溃坝和圆溃坝问题的数值模拟结果．     

Development of Full Automatic External Welding Machine for Annular Welds of Pipeline

To meet the demands of rapid development of pipeline constructions in China, a complete set of full automatic external welding machine for annular welds of pipeline and welding procedure have been developed thereof. The system has been applied in the “West-East Pipeline Project” and its performance is proven. With this welding machine the welding parameters can be either preset before or adjusted in real time during the welding process, which avoids the blemishes of same type domestic and international products. Thus it is best propitious to in-situ construction conditions and workers‘ technical level in China. In this article the development of mechanical and control systems of this product is introduced and typical welding procedure parameters are provided.     

酸糖蛋白手性柱分离6种手性化合物

通过考察缓冲液种类、浓度及其pH值对对映体在手性柱上的保留和分离行为的影响,以及流动相中加入不同种类、不同浓度的不带电荷的有机溶剂乙腈、甲醇、正丙醇、异丙醇、流动相流速和柱温对对映体分离能力的影响,优化了含碳手性中心的碱性药物苯丙哌林、酸性化合物MT-A5及MT-酸和含硫手性中心的质子泵抑制剂奥美拉唑、泮托拉唑、雷贝拉唑对映体分离条件,最佳手性分离条件为:苯丙哌林,0.05 mol/L磷酸二氢铵缓冲液(pH 3.0)-乙腈(95∶5,V/V)为流动相,流速为0.7 mL/m in,柱温为20℃;MT-A5及MT-酸,流动相为0.01 mol/L醋酸铵缓冲液(pH 5.0)-乙腈(74∶26,V/V),流速为0.9 mL/m in,柱温为20℃;泮托拉唑,流动相为10 mmol/L醋酸铵缓冲液(pH 5.5)-乙腈(93∶7,V/V),流速为0.9 mL/m in;柱温为20℃;奥美拉唑和雷贝拉唑,流动相为0.01 mol/L醋酸铵缓冲液(pH 3.0)-乙腈(95∶5,V/V),流速为0.7 mL/m in,柱温为20℃。实现了应用高效液相色谱法在α1-酸糖蛋白手性柱上对上述化合物的对映体分离,并成功用于手性药物合成中的对映体过量百分率的测定。     

汽车碰撞事故的速度分析

通过对交通事故中汽车的碰撞问题的简化 ,运用动量守恒定理和能量守恒定律着重研究了正面碰撞、追尾碰撞和侧面碰撞三种情况下 ,汽车碰撞前动量和速度的求解方法 ,为交通事故模拟和再现提供了一种更为实用的方法 ,并为科学处理交通事故、明确事故责任提供了重要参考。     

分光光度法测定脯氨酸的含量

文章用分光光度法研究了脯氨酸与四氯对苯醌的荷移反应 .实验指出 ,在硼砂缓冲溶液中 ,脯氨酸与四氯对苯醌于 30℃的水浴中恒温 1 2 0 min,可形成 1∶ 1的稳定络合物 ,其λmax=35 8nm,表观摩尔吸光系数 ε=1 .5 0× 1 0 5L·mol- 1 ·cm- 1 ,在 60 ng·m L- 1 ～ 40 0 ng·m L- 1 的范围内符合比耳定律 ,用本方法测定药物制剂的含量与文献方法一致 ,回收率在 99.65 %～ 1 0 0 .7%范围内 ,相对标准偏差在 1 .4%以内 .     

APPLICATION OF BORON MODIFIED SILICA SOL ON RETENTION AND DRAINAGE

INTRODUCTIONRecently with the high speed, large-scale develop-ment of papermaking, in the manufacture of paper and paperboard conventional single and dual reten-tion and drainage systems cannot obtain satisfying re-tention and drainage. So in 1980 microparticulate systems appeared. Because of its superiority such as good retention effectiveness on fine and chemicals, improving drainage and paper formation, reducing waste water and enhancing the concentration of white water for good recover…     

广义不确定原理对一般静态黑洞熵的影响

把广义不确定原理引入黑洞熵的计算,采用薄膜brick-wall模型,对一般静态黑洞外部标量场的熵进行了计算,得到了熵计算公式.应用该公式结果表明,可以得到已知所有静态黑洞的Bekenstein-Hawking熵.作为比较和进一步研究,对视界面上的二维膜的熵进行计算,可以更方便和一般性地得到熵与视界面积成正比的结论,该讨论可直接表明黑洞熵就是其视界面上的量子态的熵.与原始brick-wall模型不同的是,这一结论是有限的,计算中无需引入截断,且小质量近似也可以避免.     

小模数齿轮基节偏差影响下的降噪研究

深入分析了齿轮基节偏差影响下噪声的产生机理，在研究现有降噪措施的基础上，提出了一种新的降噪方案。该方案结构简单，安装调试方便，对轴承的影响小，尤其对小模数齿轮传动，效果更佳。