Study on interaction between Tb(III) and poly(N-isopropylacrylamide)

A new kind of the thermo-sensitive and fluorescent complex of poly(N-isopropylacrylamide) (PNIPAM) and Tb(III) was synthesized by free radical polymerization, in which PNIPAM was used as a polymer ligand. The complex was characterized by using X-ray photoelectron spectroscopy (XPS), ultraviolet-visual (UV), Fourier transform infrared (FT-IR) and fluorescence spectroscopy. The results from the experiments indicated that there is a strong interaction between PNIPAM and Tb(III), leading to a decrease in the electron density of nitrogen and oxygen atoms and an increase in the electron density of Tb(III) in the PNIPAM containing Tb(III) by contrast with PNIPAM and Tb(III), respectively, meanwhile, exhibiting that the Tb(III) is mainly bonded to oxygen atoms in the polymer chain of PNIPAM and formed the complex of PNIPAM-Tb(III). After forming the PNIPAM-Tb(III) complex, the emission fluorescence intensity of Tb(III) in the PNIPAM-Tb(III) complex is significantly enhanced because the effective intramolecular energy transfer from PNIPAM to Tb(III). Especially, the emission intensity of the fluorescence peak at 547 nm can be increased as high as 145 times comparing with that of the pure Tb(III). The intramolecular energy transfer efficiency for fluorescence peak at 547 nm can reach as high as 68%. The fluorescence intensity is related the weight ratio of Tb(III) and PNIPAM in the PNIPAM-Tb(III) complex. When the weight ratio is 1.4%, the maximum fluorescence enhancement can be obtained. Nevertheless, the lower critical solution temperature of PNIPAM containing a low content of Tb(III) has not obviously changed after the formation of the complex of PNIPAM-Tb(III) by the interaction between PNIPAM and Tb(III). This novel thermosensitive and fluorescence characterization of the PNIPAM-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

反铁磁耦合记录介质的一级翻转曲线

用实验测量和微磁计算的方法得到了反铁磁耦合记录介质的一级翻转曲线.利用微磁计算的目的是便于正确地理解一级翻转曲线分布图.因为它可以把一级翻转曲线分布图中不同部分与相应的磁化翻转联系起来.这样一级翻转曲线就能被用来分析复杂磁化翻转及其相互作用的细节,而这种手段可以提供比通常用的ΔM方法更多的信息. 关键词： 反铁磁耦合记录介质 一级翻转曲线 微磁学模拟     

有机改性对掺Dy3+铁氧体纳米磁颗粒性能的影响

采用共沉淀-相转化法制备出纳米级掺Dy3+铁氧体磁颗粒。选择阴离子表面活性剂月桂酸、月桂酸钠、十二烷基硫酸钠对磁颗粒进行了在线表面改性,得到磁性能和表面性能不同的复合纳米磁性材料,研究了活性剂及其用量对产物构建成分、相结构、磁性能的影响。TEM图片显示磁颗粒的形貌多数为类球形,平均粒径约18 nm;XRD图谱分析发现,活性剂及其用量不同,得到的产物其构建成分、相结构也不同;VSM测试结果表明,用月桂酸改性的产物磁性能最优、十二烷基硫酸钠改性者磁性能最差,产物室温下的饱和磁化强度(MS)随活性剂用量的增大呈现出降低的变化规律。     

基于核主元分析法和支持向量机的人耳识别

对人耳识别中若干关键问题进行了研究. 介绍了两种人耳图像归一化处理的方法,即基于外耳轮廓长轴的线标记法和基于外耳轮廓起始点的点标记法,并对这两种方法进行了对比. 在分析现有人耳识别方法不足的基础上,提出利用核主元分析法提取人耳图像的代数特征,再利用支持向量机分类模型进行人耳识别. 在带有角度、光照变化的北京科技大学人耳图像库上得到的识别率为98.7%,表明了该识别方法的有效性以及利用人耳图像进行身份识别的可行性.     

A nonlinear finite element model for the stress analysis of soft solids with a growing mass

The paper presents a new finite element (FE) model for the stress analysis of soft solids with a growing mass based on the work of Lubarda and Hoger (2002). Contrary to the traditional numerical methods emphasizing on the influence of growth on constitutive equations, an equivalent body force is firstly detected, which is resulted from the linearization of the nonlinear equation and acts as the driver for material growth in the numerical aspect. In the algorithm, only minor correction on the traditional tangent modulus is needed to take the growth effects into consideration and its objectivity could be guaranteed comparing with the traditional method. To solve the resulted equation in time domain, both explicit and implicit integration algorithms are developed, where the growth tensor is updated as an internal variable of Gauss point. The explicit updating scheme shows higher efficiency, while the implicit one seems to be more robust and accurate. The algorithm validation and its good performance are demonstrated by several two-dimensional examples, including free growth, constrained growth and stress dependent growth.     

聚吡咯水杨酸修饰电极的电化学行为及水杨酸含量测定

本用电化学方法制备了聚吡咯－水杨酸修饰电极；并进行了电化学行为的研究，经电化学处理该是电极对水杨酸根具有选择性响应，响应线性范围在１．０×１０＾－＾５－１．０×１０＾－＾３ｍｏｌ／Ｌ之间。电极斜率为４０ｍＶ／ｐＣ，该电极具有较好的稳定性，响应时间在１８０－３００ｓ之间；电极寿命可达６０ｄ。     

Single-emissive-layer all-perovskite white light-emitting diodes employing segregated mixed halide perovskite crystals

Metal halide perovskites have demonstrated impressive properties for achieving efficient monochromatic light-emitting diodes. However, the development of white perovskite light-emitting diodes (PeLEDs) remains a big challenge. Here, we demonstrate a single-emissive-layer all-perovskite white PeLED using a mixed halide perovskite film as the emissive layer. The perovskite film consists of separated mixed halide perovskite phases with blue and red emissions, which are beneficial for suppressing halide anion exchange and preventing charge transfer. As a result, the white PeLED shows balanced white light emission with Commission Internationale de L''Eclairage coordinates of (0.33, 0.33). In addition, we find that the achievement of white light emission from mixed halide perovskites strongly depends on effective modulation of the halide salt precursors, especially lead bromide and benzamidine hydrochloride in our case. Our work provides very useful guidelines for realizing single-emissive-layer all-perovskite white PeLEDs based on mixed halide perovskites, which will spur the development of high-performance white PeLEDs.

We demonstrated a single-emissive-layer all-perovskite white light-emitting diode based on a mixed halide perovskite film.     

钛及钛合金表面羟基磷灰石涂层结合强度及稳定性

钛(Ti)及其合金凭借优异的机械性能和良好的生物相容性,一直是骨和牙种植体的主要临床应用材料。由于钛及其合金自身的生物惰性,不易与周围骨组织进行快速的骨整合,因此其表面的生物活性有待进一步提高。羟基磷灰石(HA)是人体骨和牙齿的主要无机成分,具有良好的生物活性和生物相容性,受其力学性能的制约,常被作为涂层材料覆盖在钛基体表面,用以提高植入体的生物活性。但一直存在涂层与基体界面结合强度低和涂层力学稳定性差的问题,成为限制其临床广泛应用的主要因素。本文从涂层结构设计、成分设计及制备方法等方面,就国内外改善钛基底与HA涂层界面结合性能的研究现状和发展动态作一综述,为高性能钛植入体的制备和应用提供参考。     

Electrochemical Signal Tracing by Glucose Oxidase and Ferrocene Dually Functionalized Gold Nanoprobe for Ultrasensitive Immunoassay

A glucose oxidase (GOD) and ferrocene (Fc) dually functionalized gold nanoprobe was simply prepared for electrochemical immunoassay. By combination with sandwich immunoreaction at a carbon nanotube (CNT)‐based immunosensor and signal tracing of the nanoprobe through the Fc‐mediated GOD‐catalytic reaction, a new electrochemical immunoassay method was successfully developed. Both the multi‐enzyme signal amplification of the nanoprobe and the electron transfer promotion of the CNTs modified on the immunosensor greatly enhanced the signal response. Thus this method showed excellent analytical performance including ultrahigh sensitivity, wide linear range as well as good specificity, reproducibility, stability and reliability for human IgG measurement.     

Relation between the permeability and the degree of coil overlap of polymer in the bulk state

Based on the expression of the index of coil interpenetration (i.e.,the degree of coil overlap,ξ_b) of amorphous polymers in the bulk state proposed by Qian,theξ_b was rewritten asξ_b=ρ_b[η]_θ/1.66 via Flory's intrinsic viscosity equation at them conditions.Theξ_b ofpoly (vinyl chloride) (PVC) dense membranes with different molecular weights and cellulose diacetate (CA) dense membranes prepared using different solvents were determined.The permeability,permeation coefficient (P) of nitrogen and permeation flux (J) of liquid through both membranes,respectively,was measured.P and J decreased exponentially with increasingξ_b for PVC and CA membranes were revealed.