Synthesis and Crystal Structure of Complex of Sodium Perrhenate with Tetraethyl p-tert-Butylcalix[4]arene Tetraacetate

Recently,theconformationofthecalixarenehasbeenshowntobeimportantincontrollingtheseIectivityofthereceptor.Forexample,sodiumioncouldbeboundverystronglybyesterderivativesofcalix[4]areneintheconeconformationl.Wehavefoundthatinthepresenceofcertainamountofsodiumion,microamountofReO4-canbequantitativelyextractedintol,2-dichloroethanebytheligandtetraethylp-tert-butylcalix[4]arenetetraacetate(L).ItshowsthatthepresenceofNa inaqueoussolutioncanpromotetheformationofhydrophobiccomplex[NaL] .ReO'-whichc…     

稀土元素对人肝癌细胞SMMC-7721增殖的影响

用MTT法研究了14种稀土元素(La，Ce，Pr，Nd，Sm，Eu，Gd，Tb，Dy，Ho，Er，Tm，Yb和Lu)对人肝癌细胞SMMC-7721增殖的影响。他们对肝癌细胞的生长作用可分为3类。其中La^3 、Ce^3 和Eu^3 对肝癌细胞的增殖有剂量依赖性正效应，能够在一定浓度范围内刺激细胞生长；Sm^3 ，Gd^3 ，Ho^3 ，Er^3 ，Yb^3 对肝癌细胞生长的刺激作用没有剂量依赖性特征；而Pr^3 ，Nd^3 ，Tb^3 ，Dy^3 ，Tm^3 和Lu^3 则表现出对肝癌细胞的增殖具有不用程度的抑制。推测14种稀土元素作用方式的不同与他们的原子结构有一定的关系，它们对肝癌细胞的相对增殖率随着原子序数的增加呈现出一定的规律性。     

外力辅助分散作用下环氧树脂粘土纳米复合材料中粘土的微观结构与解离机理研究

采用不同分散方法(机械搅拌、高速均质搅拌和球磨分散)制备环氧树脂粘土纳米复合材料,研究了分散方法对不同有机粘土解离结构和纳米复合材料力学性能的影响,并在此基础上探讨了粘土的解离机理.结果表明,普通机械搅拌只能使小粒径粘土或大粒径粘土团聚体的外部片层解离;施加一定的外力(如高速均质搅拌)促进粘土团聚体分散,有利于粘土片层的解离;利用剪切摩擦作用较强的球磨法分散粘土,不同处理剂改性粘土的内外片层都可以充分解离,而有机改性剂中酸性质子的催化作用对粘土片层解离的影响不大,只要粒径足够小,片层解离的驱动力(基体弹性力、反应性等)能够克服其所受阻力(片层引力、层外基体粘性阻力、层内粘性引力等),粘土内外各片层将会同时向外迁移而解离.纳米复合材料的力学性能大大改善,冲击强度和弯曲强度分别提高近50%和8%;     

FRS-XRSA表征双轴取向聚对苯二甲酸乙二酯薄膜的取向分布

Ｘ－射线散射理论分析（ＦＲＳ－ＸＲＳＡ）是作者为了研究和表征取向高聚物结晶度与晶粒取向分布（ＯＤＣ）的一种新方案．在表征ＯＤＣ方面应用分峰法（ＣＰＲ）消除了传统极图法（ＰＦＭ）中高重叠峰相互干扰的困难，克服了取向分布函数分析（ＯＤＦＡ）中出现虚织构的困难，并且经一次系统的ＦＲＳ－ＸＲＳ测定，可以得到几乎所有主要（ｈｋｌ）晶面法向的ＯＤＣ．作者应用ＦＲＳ－ＸＲＳＡ对二类双轴取向ＰＥＴ磁带薄膜进行了ＯＤＣ的研究。基于结晶几何学原理（ＣＧＰ），建立了三斜晶系晶粒坐标系与试样坐标系的关系，并用于推演未测定方位角（αｉ，βｉ）（ｈｋｌ）的晶面散射以及未测（ｈ′ｋ′ｌ′）晶面的ＯＤＣ．作者关系建立了双轴取向函数〈ｃｏｓ２φｈｋｌ，ｉ〉，ｉ＝Ｎ、Ｍ、Ｔ的计算公式．按照ＦＲＳ－ＸＲＳＡ获得了反映取向分布的１０个晶面的双轴极图、三个主晶面（１００）、（０１０）、（１０５）的总极图，以及反映平均取向的各种取向函数，如〈ｃｏｓ２φｈｋｌ，ｉ〉、ｆｃｈｋｌ，ｉ等，结果十分令人满意．     

N-K near-edge x-ray-absorption fine structures of acetonitrile in gas phase

The dynamic processes of N(1s) core-hole excitation in gas-phase CH3CN molecule have been studied at both Hartree-Fock and hybrid density-functional theory levels. The vibrational structure is analyzed for fully optimized core-excited states. Frank-Condon factors are obtained using the linear coupling model for various potential surfaces. It is found that the vibrational profile of the N-K absorption can be largely described by a summation of two vibrational progressions: a structure-rich profile of nu(CN) stretching mode and a large envelope of congestioned vibrational levels related to the strong (-C-CN) terminal bending bond. Excellent agreement between theoretical and experimental spectra is obtained.     

Two new C18-norditerpenoid alkaloids from Aconitum delavayi

Further phytochemical investigation of the unique C18-norditerpenoid alkaloids from the roots of Aconitum delavayi Franch ledto the isolation of two new norditerpenoid alkaloids,delavaconitine F 1 and delavaconitine G 2.Their structures were determinedfrom spectroscopic evidence.     

含硫液体烃燃料水蒸气重整制氢I．Pt／Ce0．8Gd0．2O1．9催化剂的制备、表征和抗硫性能

以柠檬酸溶胶-凝胶法合成的具有萤石结构的Ce0.8Gd0.2O1.9（CGO）复合氧化物为载体，用初湿浸润法制备了负载型Pt催化剂．纯异辛烷的重整反应结果显示，600和800℃焙烧的催化剂达到了热力学平衡转化，1000℃焙烧会导致Pt的聚集和氧化物的严重烧结，因而催化剂活性较差．抗硫测试表明，800℃焙烧的催化剂抗硫性能最好，在300μg／g硫存在下，100h内异辛烷均接近完全转化；在500μg／g硫存在下催化剂仍表现出良好抗硫性能．程序升温还原和X射线分析结果显示．800℃焙烧时Pt与CGO载体间的相互作用最强，同时催化剂具有良好的热稳定性，这是催化剂具有抗硫性能并且抗硫作用持久的根本原因．反应条件下噻吩硫完全转化成H2S，硫的转化可能是通过氧化-还原机理进行的．     

DeNOx催化剂FeZSM-5/Raney Fe的制备

用原位晶化法合成了FeZSM-5/RFe(RFeRaney Fe)催化剂. 合成液的组成为5Na2O*100SiO2*10TPABr*7 000H2O,pH＞11.5. 合成液中不含Al,ZSM-5分子筛的骨架Al只来源于Raney Fe的表面. 此法提高了ZSM-5分子筛中骨架Al的稳定性和分子筛上Fe离子的负载量. FeZSM-5/RFe用作DeNOx催化剂时具有较高的活性和水热稳定性.     

双嵌段共聚物薄膜介观结构的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative Particle Dynamics, DPD)方法模拟两平行平板间的双嵌段共聚物体系的介观结构. 模拟结果表明, 随板间距的增大, 体系分层数量的增加是不连续的, 在分层数量的增加过程中, 出现不规则结构的过渡区；聚合物链末端距随板间距的增大呈周期性振荡, 振荡幅度逐渐减小. 对模拟结果的分析表明：层状结构转变点与分层数量之间存在近似线性关系；层状结构转变点近似与共聚物链长的2/3次方成正比.     

Optimization of tetramethoxysilane-derived sol gel entrapment protocol stabilizes highly active chlorophyllase

Entrapment of membrane proteins is a challenging task compared to that involving soluble proteins. Chlorophyllase, a membrane protein, was successfully entrapped in tetramethoxysilane-derived sol-gel. Pre-gel sol typically consists of an aqueous suspension of chlorophyllase, precursors including tetramethoxysilane and/or methytrimethoxysilane, and sodium fluoride as catalyst. To obtain a highly active entrapped enzyme preparation, the effects of various immobilization parameters, including the chemical compositions of pre-gel sol (water/silane ratio, precursor type and proportions, enzyme loading, sodium fluoride concentration), and sol-gel process parameters (aging and drying time and approach) have been investigated. Chlorophyllase demonstrated the highest activity in gel derived from a pre-gel sol with water/silane ratio of 30 and enzyme loading of 0.257 mg_protein/g_gel, and showed moderately lower activity in organically modified sol-gel than that in hydrophilic sol-gel. The effects of water/silane ratio and precursor combinations on the activity of entrapped chlorophyllase were also studied by examining the pore morphology of gel via nitrogen adsorption-desorption. Longer aging time leads to an entrapped chlorophyllase preparation with higher activity. Chlorophyllase preparation demonstrated negligible activity after air-drying for 12 h while lyophilized chlorophyllase preparation demonstrated 8, 4 and 4 times higher activity than air-dried, vacuum-dried and solvent-dried preparations. Chlorophyllase demonstrated 30% higher activity in the improved sol-gel protocol than that from a non-optimized sol-gel protocol developed in a previous study.