分散聚合水基聚苯胺乳胶微球制备与表征

水溶性空间稳定剂聚乙烯吡咯烷酮（PVP）存在时，采用分散聚合制备水溶性单分散的聚苯胺(PAn)乳胶粒子，采用透射电子显微镜（TEM）观察粒子形态及尺寸；利用紫外-可见吸收光谱对胶体分散体系进行表征.实验结果表明，当PAn含量较少（w< 16.78％）时， PAn-PVP复合乳胶粒子呈米粒状；当PAn含量较大（w >23.22％）时， PAn-PVP复合乳胶粒子呈球形.     

Macro-, Micro-, Nano- and Crystal Structures of a Homodinuclear Complex [NH3（ CH2）3NH3]2{Na2[（C6H4O2）2]（C6H4O2H）2}

A homodinuclear complex （NH3CH2CH2CH2NH3）2 {Na2[（C6H4O2）2] （C6H4O2H）2} （1） has been synthesized by a solution-based self-assembly route. It crystallized in monoclinic system with space group P21/c. Every sodium ion coordinates in a tetragonal prism fashion with two O atoms of a terminal chelating catecholate ligand and three O atoms from two bridging catecholate ligands. Two neighboring NaO5 tetragonal prisms are edge-shared and centrosymmetric with regard to the inversion center to form a binuclear cluster {Na2[（C6H4O2）2]（C6H4OOH）2}^4- anion. The complex anions were aligned parallelly by n-n interaction and linked with the protonated 1,3-propylenediamine through hydrogen bonds which were assembled into a multi-lamellar structure with channels. The crystal exhibits rectangular geometry with an interior triangle hollow structure under optical microscopy. And the scanning electron microscopy （SEM） indicates that the wall of the tubes shows multi-lamella morphologies. Further, the transmission electron microscopy （TEM） reveals that the crystal is composed of multi-lamellar nano-tubes with diameters less than 100 nm. The molecular structure of the complex was compared with that of its isomer complex 2.     

Ultraviolet photochemistry of ethane: implications for the atmospheric chemistry of the gas giants

Chemical processing in the stratospheres of the gas giants is driven by incident vacuum ultraviolet (VUV) light. Ethane is an important constituent in the atmospheres of the gas giants in our solar system. The present work describes translational spectroscopy studies of the VUV photochemistry of ethane using tuneable radiation in the wavelength range 112 ≤ λ ≤ 126 nm from a free electron laser and event-triggered, fast-framing, multi-mass imaging detection methods. Contributions from at least five primary photofragmentation pathways yielding CH₂, CH₃ and/or H atom products are demonstrated and interpreted in terms of unimolecular decay following rapid non-adiabatic coupling to the ground state potential energy surface. These data serve to highlight parallels with methane photochemistry and limitations in contemporary models of the photoinduced stratospheric chemistry of the gas giants. The work identifies additional photochemical reactions that require incorporation into next generation extraterrestrial atmospheric chemistry models which should help rationalise hitherto unexplained aspects of the atmospheric ethane/acetylene ratios revealed by the Cassini–Huygens fly-by of Jupiter.

The vacuum ultraviolet photodissociation dynamics of ethane provide clues for modelling the atmospheric chemistry of the gas giants.     

Simultaneous determination of lead(II) and cadmium(II) at a diacetyldioxime modified carbon paste electrode by differential pulse stripping voltammetry

A simple and effective chemically modified carbon paste electrode (CMCPE) for the simultaneous determination of lead(II) and cadmium(II) was developed in this work. The electrode was prepared by the addition of diacetyldioxime into a carbon paste mixture. Pb²⁺ and Cd²⁺ were preconcentrated on the surface of the modified electrode by complexing with diacetyldioxime and reduced at a negative potential (−1.10 V). Then the reduced products were oxidized by differential pulse stripping. The fact that two stripping peaks appeared on the voltammograms at the potentials of −0.65 V (Cd²⁺) and −0.91 V (Pb²⁺) demonstrates the possibility of simultaneous determination of Pb²⁺ and Cd²⁺. Under the optimized working conditions, calibration graphs were linear in the concentration ranges of 1.0×10⁻⁷-1.5×10⁻⁵ mol l⁻¹ (Pb²⁺) and 2.5×10⁻⁷-2.5×10⁻⁵ mol l⁻¹ (Cd²⁺), respectively. For 5 min preconcentration, detection limits of 1×10⁻⁸ mol l⁻¹ (Pb²⁺) and 4×10⁻⁸ mol l⁻¹ (Cd²⁺) were obtained at the signal noise ratio (SNR) of 3. To evaluate the reproducibility of the newly developed electrode, the measurements of 5×10⁻⁷ mol l⁻¹ Pb²⁺ and Cd²⁺ were parallel carried out for six times at different electrodes and the relative standard deviations were 2.9% (Pb²⁺) and 3.2% (Cd²⁺), respectively. Interferences by some metals were investigated. Only Ni²⁺ and Hg²⁺ apparently affected the peak currents of Pb²⁺ and Cd²⁺. The diacetyldioxime modified carbon paste electrode was applied to the determination of Pb²⁺ and Cd²⁺ in water samples. The results indicate that this electrode is sensitive and effective for the simultaneous determination of Pb²⁺ and Cd²⁺.     

纳米微晶Y_2Sn_(2-x)FexO_(7-δ)的制备及其催化选择性能研究

采用共沉淀并加法制备了Ｂ位掺杂烧绿石型稀土复合氧化物纳米微晶Ｙ２Ｓｎ２－ｘＦｅｘＯ７－δ（ｘ＝００～１０）。制备的纳米微晶属于立方晶系，Ｆｄ３ｍ，晶胞参数与掺杂量呈线性关系。通过Ｍｓｂａｕｅｒ、ＴＧＤＴＡ，气相色谱和γ射线辐照等技术研究了纳米微晶对ＣＯ的催化选择性能。结果表明，纳米微晶对ＣＯ的催化选择性明显高于一般粉料对ＣＯ的选择性；纳米微晶对ＣＯ的选择性与掺杂量有关；未辐照的纳米微晶，当掺杂量ｘ＝０６时，其对ＣＯ的选择性为最高，辐照后的纳米微晶，当掺杂量ｘ＝０４时，其对ＣＯ的选择性为最高     

Conformational features and anion-binding properties of calix[4]pyrrole: a theoretical study

The conformational preference of calix[4]pyrrole and its fluoride and chloride anion-binding properties have been investigated by density functional theory calculations. Geometries were optimized by the BLYP/3-21G and BLYP/6-31G methods, and energies were evaluated with the BLYP/6-31+G method. To model the effect of medium, the SCIPCM solvent model was also employed. Four typical conformations of the parent substituent-free calix[4]pyrrole were studied. Both in the gas phase and in CH(2)Cl(2) solution, the stability sequence is predicted to be 1,3-alternate > partial cone > 1,2-alternate > cone. The cone conformation is predicted to be about 16.0 and 11.4 kcal/mol less stable in the gas phase and CH(2)Cl(2) solution, respectively. This is mainly due to electrostatic repulsions arising from the all-syn pyrrole/pyrrole/pyrrole/pyrrole arrangement present in this conformer. The existence of possible 1:1 and 1:2 anion-binding modes were explored in the case of fluoride anion, and the factors favoring the 1:1 binding mode are discussed. The calculated binding energy for fluoride anion is about 15 kcal/mol larger than that for chloride anion. The calculated binding energy for chloride anion agrees with the experimental value very well. The presence of meso-alkyl substituents destabilizes the cone conformer with respect to the 1,3-alternate conformer and, therefore, reduces the anion-binding affinity by 3-4 kcal/mol. The strength of N-H- - -anion hydrogen bonds in the various structures subject to study were estimated on the basis of the calculated anion-binding energies and the predicted structural deformation energies of substituent-free calix[4]pyrrole.     

Poly（meta-phenylene） Derivative with Rigid Twisted Biphenyl Units in Backbone： Synthesis, Structural Characterization, Photophysical Properties and Electroluminescence

A soluble poly(meta-phenylene)derivative with rigid twisted biphenyl unit was synthesized by the Yamamoto coupling reaction.The polymer is soluble in common organic solvents,and the number-average molecular weight is about 6500.The UV-Vis and quantum chemical calculation indicate that the different conformation segments named "conformers" exist in the polymer backbones;it was also further confirmed by the single crystal X-ray diffraction study of the dimeric model compound.The π-π transition of biphenyl segments of twisted and planar conformations made the polymer exhibit a strong absorption around 256 nm and a weak absorption at about 300 nm.Furthermore,the polymer exhibits a strong UV photoluminescence at 372 nm when the excitation wavelengths are longer than 300 nm.The ultraviolet-emitting electroluminescence(EL)device with the single layer structure shows EL λmax of the derivative at 370 nm.     

Structure and stability of endohedral X@Si20H20 complexes (X = Li, Na, K, Be, Mg, Ca)

The structure and stability of endohedral X@Si₂₀H₂₀ complexes (X = Li^0/+, Na^0/+, K^0/+, Be^0/2+, Mg^0/2+, Ca^0/2+) have been studied at the B3LYP/6-31G* level of density functional theory. It is found that complexes with X = Na^0/+, K^0/+, Mg and Ca^0/2+ are energy minimum structures with X at the cage center in I_h symmetry, while those with X = Li^0/+, Be^0/2+, Mg²⁺ have off-centered structures with X towards one pentagon face in C_5v symmetry. Large electron or charge transfer between the Si₂₀H₂₀ cage and the encapsulated X has been observed.     

Multilayer poly(vinyl alcohol)-adsorbed coating on poly(dimethylsiloxane) microfluidic chips for biopolymer separation

A poly(dimethylsiloxane) (PDMS) microfluidic chip surface was modified by multilayer-adsorbed and heat-immobilized poly(vinyl alcohol) (PVA) after oxygen plasma treatment. The reflection absorption infrared spectrum (RAIRS) showed that 88% hydrolyzed PVA adsorbed more strongly than 100% hydrolyzed one on the oxygen plasma-pretreated PDMS surface, and they all had little adsorption on original PDMS surface. Repeating the coating procedure three times was found to produce the most robust and effective coating. PVA coating converted the original PDMS surface from a hydrophobic one into a hydrophilic surface, and suppressed electroosmotic flow (EOF) in the range of pH 3-11. More than 1,000,000 plates/m and baseline resolution were obtained for separation of fluorescently labeled basic proteins (lysozyme, ribonuclease B). Fluorescently labeled acidic proteins (bovine serum albumin, beta-lactoglobulin) and fragments of dsDNA phiX174 RF/HaeIII were also separated satisfactorily in the three-layer 88% PVA-coated PDMS microchip. Good separation of basic proteins was obtained for about 70 consecutive runs.