基于PLC现场数据采集与分析

介绍了PLC控制器的可行性分析,阐述了基于PROFIBUS工业以太网数据采集的研究,并提出了基于PLC现场数据采集与分析的方法。     

基于MMD算法的HMM参数重估计的矩阵表示

本文提出的MMD算法用于提高模型区别错误信息和正确信息的能力．利用该算法在对模型的参数进行重估计时．涉及到复杂的目标函数的梯度运算．击运用矩阵运算使得梯度运算变得简单明了，因此本文给出了MMD算法下的HMM参数重估计的矩阵表示形式并给出了证明．     

Differential pulse anodic stripping voltammetric determination of traces of copper with a tobramycin-Nafion modified electrode.

A Nafion-modified glassy carbon electrode incorporated with tobramycin for the voltammetric stripping determination of Cu2+ has been explored. The electrode was fabricated by tobramycin containing Nafion on the glassy carbon electrode surface. The modified electrode exhibited a significantly increased sensitivity and selectivity for Cu2+ compared with a bare glassy carbon electrode and the Nafion modified electrode. Cu2+ was accumulated in HAc-NaAc buffer (pH 4.6) at a potential of -0.6 V (vs. SCE) for 300 s and then determined by differential pulse anodic stripping voltammetry. The effects of various parameters, such as the mass of Nafion, the concentration of tobramycin, the pH of the medium, the accumulation potential, the accumulation time and the scan rate, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 1.0 x 10(-9) to 5.0 x 10(-7) mol l(-1) with a correlation coefficient of 0.9971. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-8) and 2.0 x 10(-7) mol l(-1) Cu2+, respectively. The detection limit (three times signal to noise) was 5.0 x 10(-10) mol l(-1). A study of interfering substances was also performed, and the method was applied to the direct determination of copper in water samples, and also in analytical reagent-grade salts with satisfactory results.     

用于激光推进的高功率激光器的选择

 从激光推进的要求出发，阐述了用于激光推进的高功率激光器的选择原则，即激光器必须满足：（1）高的平均功率和峰值功率；（2）高的单脉冲能量；（3）高的重复频率；（4）优良的大气传输特性。主要分析了目前YAG固体激光器、自由电子激光器和TEA脉冲CO₂激光器的特点，通过上述4个方面性能的比较，认为在目前水平下，TEA脉冲CO₂激光器是进行激光推进的首选强激光源，其优点表现在：功率可达10kW量级，单脉冲能量可达0.5~1kJ，重复频率为20~40Hz；激光波长处于大气传输窗口，对大气变化不敏感；工作物质快速流动，不存在热透镜效应和破坏阈值；相关光学元件易于制造；光束质量较好；运行成本低。     

Online Cooperative Learning in Physical Chemistry

The use of cooperative learning in an online setting is examined using the online segment of a recently offered physical chemistry course as an example. The nature and function of classical, face-to-face cooperative learning are outlined. The online course segment is outlined and is analyzed with regard to the criteria for classical cooperative learning. Though this specific course segment functioned poorly when taught as online cooperative learning, it is possible to structure online courses to take advantage of the strengths of cooperative learning. The possible structure and function of an online cooperative learning community are explored, concluding with a specific model for online cooperative learning.     

生长调节剂对大叶白蜡幼苗生长的影响

对一年生大叶白蜡实生苗用3种不同浓度的赤霉素（GA3）、ABT生根粉7号（ABT7）、萘乙酸（NAA）进行处理。结果表明，3种生长调节剂对大叶白蜡幼苗生长有明显的促进作用。处理后的苗木提高，生长加快，茎干增粗，叶片增大，抗性增强，其中以50mg/L的GA3作用最为显著。     

管节点疲劳裂纹扩展规律和寿命估算

对Ｔ型管节点的疲劳试验进行分析，研究疲劳裂纹的扩展规律，用“柔度法”计算应力强度因子范围ΔＫ，确定材料常数ｃ，ｍ，提出并运用“直线－曲线模式法”估算管节点疲劳寿命，结果与试验吻合，具有一定的实用参考价值。     

锤击沉管灌注桩施工时应注意的几个问题

锤击沉管灌注桩应用非常广泛.从桩位的确定、沉管深度、混凝土质量、钢筋笼振入长度、桩身混凝土凿除等几个方面,提出了提高锤击管灌注桩施工质量的一些建议.     

Effects of Substrate Temperature on Helium Content and Microstructure of Nanocrystalline Titanium Films

Helium-charged nanocrystalline titanium films have been deposited by HeAr magnetron co-sputtering. The effects of substrate temperature on the helium content and microstructure of the nanocrystalline titanium films have been studied. The results indicate that helium atoms with a high concentration are evenly incorporated in the deposited titanium films. When the substrate temperature increases from 60℃ to 350℃ while the other deposition＇parameters are fixed, the helium content decreases gradually from 38.6 at.% to 9.2at.%, which proves that nanocrystalline Ti films have a great helium storage capacity. The 20 angle of the Bragg peak of （002） crystal planes of the He-charged Ti film shifts to a lower angle and that of （100） crystal plane is unchanged as compared with that of the pure Ti film, which indicates that the lattice parameter c increases and a keeps at the primitive value. The grain refining and helium damage result in the diffraction peak broadening.