锐钛矿型纳米TiO2介孔粉体表面织构的研究

以硫酸钛和尿素为原料,聚乙二醇-1000为空间构造剂,104℃下经尿素水解均匀沉淀法研制颗粒分散均匀、粒径可控的高热稳定性锐钛矿型纳米TiO2介孔粉体,并对其晶相、颗粒大小、比表面积、形貌和孔道结构进行了表征.结果表明,未经任何热处理的TiO2粉体即为锐钛型晶相,颗粒为均匀分散的类球型颗粒,且颗粒间形成直通型的介孔孔道,其孔径在10～30nm之间.控制焙烧温度可以达到控制颗粒大小及形貌的目的,经850℃焙烧5h的样品仍保持锐钛矿型晶相,未出现向金红石型晶相转变的迹象.     

CuZnAl水滑石衍生催化剂上甲醇水蒸气重整制氢Ⅲ.合成水滑石用金属盐的影响

采用共沉淀法,用不同金属盐为Cu源和Zn源合成了一系列CuZnAl水滑石,以此为前体经600℃焙烧后制得相应催化剂.用硝酸盐和醋酸盐合成的水滑石结晶度高,其衍生催化剂比表面积大、Cu的分散性好且易于还原;而用硫酸盐和盐酸盐合成的水滑石结晶度差,其衍生催化剂比表面积小、Cu的分散性差且不易还原.反应评价结果显示,用硝酸盐和醋酸盐制得的催化剂活性高、反应稳定性好;而用硫酸盐和盐酸盐制得的催化剂由于低的Cu表面积以及S和Cl的毒化作用而几乎无催化活性.在醋酸盐制备的催化剂上,产物干气中CO的浓度明显较低,在250℃和WHSV=3.28 h-1的条件下约为0.03%~0.04%,仅为硝酸盐所制催化剂上CO浓度的1/5;在210℃和WHSV=0.5 h-1的条件下,该催化剂上甲醇几乎完全转化,同时CO浓度降至约0.005%.N2O滴定、CO2程序升温脱附和程序升温还原结果显示,用醋酸盐和硝酸盐制备的催化剂具有极相近的Cu表面积和表面碱性,但前者CuO的还原峰温较后者低近70℃,归因于ZnO与CuO间的强相互作用,这是催化剂具有良好选择性的可能原因.     

6′,6″-二吡啶基-2,2′:4′,4″:2″,2′″-四联吡啶稀土配合物的合成、表征及荧光性质研究(英文)

0 IntroductionMetallosupramolecular oligomers and polymerscan result from the interaction of metal ions with ap-propriate multidentate ligands designed for multinucle-ar binding[1,2], and there are considerable interests in thedesign of species containing known numbers of metalions in defined spatial arrangements. The electronic andphotophysical properties of oligopyridine complexes oftransition-metal ions make their incorporation particu-larlyattractive and the possibilityofinter-metallic ele…     

二磺酸掺杂高热稳定性导电聚苯胺的合成及性能

以有机二磺酸作为掺杂剂合成了具有高热稳定性的二磺酸掺杂导电聚苯胺。研究了反应时间、温度、酸/苯胺摩尔比等因素对产率、产物的导电率与分子量的影响。利用微波加热的方法测试有机二磺酸掺杂聚苯胺的热稳定性能，结果表明：有机二磺酸掺杂的导电聚苯胺在微波场中升温速率快，并且具有良好的反复升温性能。     

飞行时间质谱中的空间电荷效应研究

在分子多光子电离实验中, 发现母体离子的飞行时间(TOF)质谱峰随激光强度的提高而展宽, 此现象归因于离子团内离子间库仑排斥作用的空间电荷效应. 为从理论上解释此现象, 尝试了从一个简单的理论模型进行推演, 得到飞行时间质谱峰的半高全宽(FWHM)与激光能量、样品气体的分压比、电极板的总电压、离子质量及所采用的透镜聚焦焦距之间关系的解析表达式, 所得的结果能够很好地说明实验现象.     

A New Asterosaponin from the Starfish Culcita novaeguineae

A new asterosaponin named novaeguinoside A, along with a known saponin, asteronyl pentaglycoside sulfate, was isolated from the starfish Culcita novaeguineae. The new compound was identitied to be sodium 6α-O-{β-D-fucopyranosyl-(1→2)-β-D-fucopyranosyl-(1→4)-[β-D-quinovopyranosyl-(1→2)]-β-D-xylopyranosyl-(1→3)-[β-D-quinovopyranosyl}-5α-pregn-9(11)-en-20-one-3β-yl-sulfate by extensive spectral analysis and chemical evidence.     

Er~(3 ),Ho~(3 )和Tm~(3 )在硫氧化钆中的余辉发光

非放射性长余辉磷光粉作为美化和清洁光源在发光陶瓷、交通安全标志、紧急突发事件的照明设施、工艺美术涂料等众多领域得到越来越广泛的应用,引起人们的重视.到目前为止,文献报道的稀土长余辉磷光体的激活离子主要有铕离子(Eu3+和Eu2+[1-4]、三价铈离子(Ce3+)[5]、三价铽离子(Tb3+)[6]、三价镨离子(Pr3+)[7]、三价钐离子(Sm3+)[8].Ho3+,Er3+,Tm3+等稀土离子作为红外上转换发光材料的激活离子[9～12],而关于它们的长余辉发光的报道极少.最近,雷炳富等在Tm3+离子[13]激活的硫氧化钇体系中发现了长余辉发光.在此,我们通过高温固相法合成了Er3+,Ho3+和Tm3+掺杂的硫氧化钆长余辉磷光粉,观察到该体系中迄今未见文献报道的Er3+,Ho3+和Tm3+离子的长余辉发光.     

树脂吸附法处理水杨酸甲酯生产废水的研究

采用吸附树脂NDA—99处理水杨酸甲酯生产废水，结果表明该树脂时废水中的5磺基水杨酸及水杨酸均具有良好的吸附—脱附性能．废水经预处理和吸附处理后，CODCr由57000-59000mg／L降至6300mg／L左右，去除率接近89％．用IBV8％NaOH 3BVH2O作脱附剂，在温度为60℃、流量为IBV／h的条件下，脱附率接近100％，树脂可重复使用．高浓度脱附液经酸化、浓缩、冷却结晶，可回收5—磺基水杨酸，回收率为95％左右。纯度为78％。     

Preparation of Micron-size Functional Fluorescent Microspheres

As a kind of special functional microspheres, fluorescent polymer microspheres could be used in cell label and separation, blood flow assay, flow cytometer marking, chemical reaction assay,and in analyst of the transform and diffusion of particles in soil 1. However, one of the most important applications of fluorescent microspheres is in the high-throughput screening of drugs (HTS) 2. Through affinity interaction, radioactive ligands (latent drugs) are bound to fluorescent microspheres covered by receptor, and luminescence is produced by radioactivity, so ligands can be assayed and screened.In this study, we developed a technique for preparing micron-size fluorescent microspheres with different functional groups. The methods included the synthesis of micron-size polystyrene microspheres through the dispersion polymerization of styrene in different media such as ethanol,ethanol-water, and isopropanol; the functional polystyrene microspheres were prepared by introduction of functional monomers into the reaction system of styrene; the functional fluorescent microspheres were obtained by the way of dying functional microspheres in the fluorescent material's ethanol solvent.The average diameter of microspheres was in the range of 1～10 μm, and the distribution was normal distribution. The functional groups included -OH, -CHO, -COOH, -CONH2, and SO3H. The absorbing spectrum and exciting spectrum were tested, the results showed that the maximal absorbance of fluorescent microsphere was near 306.5 nm, and its maximal excitation was near 362 nm. The excitation spectrum of fluorescent material (DPO) and fluorescent microspheres were shown in figure 1, and it indicated that the developed fluorescent microspheres showed the same excitation behavior like DPO, which related to the fluorescent microspheres had stable luminescence property.     

快速响应的温敏性聚(N-异丙基丙烯酰胺)水凝胶 Ⅰ.以CaCO_3为成孔剂制备方法、表征及动力学研究

以不同粒径的CaCO3粒子为成孔剂 ,合成了快速响应的温敏性聚 (N 异丙基丙烯酰胺 ) (PNIPA)水凝胶 .利用扫描电镜观察到水凝胶具有特殊的孔状结构 ,得到水凝胶的孔径大小为几十微米左右 .动力学研究表明 ,该水凝胶在温敏膨胀或收缩时 ,具有快速的响应速率 ,在 10min内的失水率可达 90 % .比较了干凝胶和4 0℃下失水后的凝胶两种不同状态下水凝胶的膨胀曲线 ,发现两者的溶胀动力学曲线明显不同 ,前者的曲线有拐点 .同时发现与失水收缩速率相比 ,水凝胶具有较慢的吸水膨胀速率 .