新型化合物[Ni(en)3]2[Ni(en)2(H2O)2][As6V15O42]·4H2O晶体的水热合成与表征

金属氧酸盐因其在医药临床、工业催化、功能材料等方面的广泛应用而引起人们的关注[1～6], 其中, 有关钒化学的研究一直很活跃, 钒具有与钼、钨明显不同的结构特性, 钒可以采取VO4, VO5和VO6方式配位, 同时, 钒的价态可以是+3, +4和+5价. 由于钒可采取多种配位方式及多种价态, 与钼酸盐和钨酸盐相比, 钒酸盐更具有结构柔顺性, 同时易形成低价或混合价态物种.在以往的文献中, 有关P-V-O体系多金属氧酸盐的水热合成的研究已有大量的报道[7], 在常规溶液合成中, 人们已对As-V-O体系进行了相对深入的研究, 而有关水热合成的研究报道却很少, 已见报道的砷钒化合物有K6*6H2O[8,9], 4-[10], 6-[11](X=SO2-3, SO2-4, H2O). 为了探究水热条件下As-V-O体系的反应特性, 我们开展了这方面的研究工作, 并取得了突破性进展. 本文采用中温水热技术合成了含有机基团的砷矾超分子化合物2**4H2O, 探讨这类化合物的非线性光学性质、催化性质及其它功能特性将是一个非常有意义的研究领域.     

微量元素锡与健康

随着经济的发展，锡及其化合物越来越多地用于现代生活。综述了锡对人体健康的影响，包括：锡的性质、存在，环境污染、抗癌作用以及毒性等方面。     

DFT法研究离子液中EMIM~ 催化丁烯双键异构反应机理(II)

用密度泛函理论(DFT)在B3LYP/6鄄31G(d,p)的计算水平上研究了离子液中1鄄乙基鄄3鄄甲基咪唑阳离子(EMIM )的4鄄H和5鄄H原子催化丁烯双键异构反应的可能途径,优化了反应体系的平衡态和过渡态的几何构型,分析了反应过程中键参数的变化,通过振动分析对平衡态和过渡态进行了验证.计算结果表明,离子液中的EMIM 首先通过4鄄H和5鄄H原子吸附丁烯,进而催化丁烯的双键异构反应,EMIM 的4鄄H和5鄄H催化1鄄丁烯异构为2鄄丁烯的正反应活化能分别为204.2和207.3kJ·mol-1,逆反应活化能约为220.9和223.8kJ·mol-1,反应为基元反应.     

有机分子与聚电解质静电吸附成膜特性研究

选取多种有机分子及聚电解质，采用静电吸附自组装法制备了聚电解质，聚电解质、聚电解质，有机分子、有机分子，有机分子的复合薄膜，讨论了这些体系的静电吸附成膜特性及其成膜机理．     

一种制备大量氧化锌纳米管的简单方法(英)

ZnO nanotubes were synthesized in large scale by thermal decomposition of the precursors obtained via chemical reaction between Zn(CH₃COO)₂·2H₂O and NaHCO₃ in the presence of surfactant sodium dodecyl sulfate (SDS). The inner diameters of the tubes were in the range of 80～100 nm, and outer diameters in the range of 160～260 nm with lengths up to a few micrometers. The products were characterized with XRD, TEM, and SEM.     

Synthesis and Characterization of Novel Polyimides Based on Pyridine-containing Diamine

A new aromatic diamine monomer containing pyridine unit, 2,6-bis （4-aminophenoxy- 4＇-benzoyl）pyridine（BABP）, was synthesized in three steps, starting from 2,6-pyridinedicarboxyl chloride. A series of novel pyridine-containing polyimides were prepared v/a the polycondensation of BABP with various aromatic dianhydrides through poly（amic acid） precursors, and thermal or chemical imidization of the precursors. The polyimides exhibit desirable properties, e.g., good solubility in N-methyl-2-pyrrolidone and m-cresol, excellent thermal stability and film-forming capability, as well as high inherent viscosity, indicating high molecular weight.     

高效液相色谱-质谱法测定水产品中孔雀石绿及其代谢物

在水产养殖过程中,人们经常使用各种药物进行水体消毒和防止鱼病害,孔雀石绿就是其中的一种染料类杀菌剂,近年来发现它特别是其代谢物在水产体内有明显的残留现象,且代谢物的残留时间较长,由于孔雀石绿化学官能团三苯甲烷是一种致癌物质,所以欧盟、美国等宣布禁止其在经济鱼类(观赏鱼除外)养殖过程中使用。经文献检索,国内虽有水产品中孔雀石绿残留量检验方法的报道,但未涉及代谢物残留量检测方法的报道。国外已建立的检测方法主要采用了气相色谱质谱联用法测定孔雀石绿代谢物、高效液相-色谱法同时测定孔雀石绿及其代谢物和高效液相色谱-质谱法同时测定孔雀石绿及其代谢物。我们利用HPLC-VIS和Q-TOFMS技术分别建立了高效液相色谱法(初筛法)和高效液相串联质谱法(确证法)两种检测方法。     

二铬四醋酸基簇合物的定域分子轨道研究

利用ＩＮＤＯ自洽场半经验量子化学计算方法和Ｅｄｍｉｓｔｏｎ－Ｒｕｅｄｅｎｂｅｒｇ定域化方法，分别计算了没Ｃｒ－Ｃｒ键长的气相、固相Ｃｒ２（Ｏ２ＣＣＨ３）４分子和沿Ｃｒ－Ｃｒ方向有Ｈ２Ｏ配体的「Ｃｒ２（ＣＯ３）４（Ｈ２Ｏ２）２」＾４－离子的化学键性质，结果表明，Ｃｒ２（Ｏ２ＣＣＨ３）４在气相中存在ｄ四重键，而在固相中则不存在，揭示了四重键长之间的联系，直接给出Ｃｒ－Ｃｒｄ四重键的量子化学图象，并阐明     

PHOTO-INDUCED DOPED POLYANILINE BY THE VINYLIDENE CHLORIDE AND METHYL ACRYLATE COPOLYMER AS PHOTO ACID GENERATOR

The emeraldine base form of polyaniline (PANI) can be doped by a photo-induceddoping method. In this method a copolymer of vinylidene chloride and methyl acrylate(VCMAC) was used as photo acid generator which can release proton when it is exposedto ultraviolet light (λ= 254 nm). The structure of PANI-VCMAC system before and afterirradiation was characterized by elemental analysis, IR, XPS, and SEM images. Resultsobtained indicate that the photo-induced doping characteristics, such as doping positionand type of charge carriers, are similar to that of PANI doped with HCl. The poor room-temperature conductivity (～10~(-5)S/cm) of PANI-VCMAC system after irradiation maybe due to low doping degree (～pH= 3) and the difference in morphology as compared withPANI-HCl film.     

SYNTHESIS OF ORGANOGERMANE OLIGOMERS VIA LIGAND SUBSTITUTION POLYMERIZATION FROM 1, 4-DIOXANE COMPLEX OF GERMANIUM DICHLORIDE

Some organogermanium oligomers with different side groups were synthesized via li-gand substitution polymerization from 1, 4-dioxane complex of germanium dichloride withdifferent organolithitum compounds. The oligomers were isolated through either precipi-tation from methanol or extraction using toluene with a yield of no less than 50%. Theweiglit average molecular weight (M_w) of the oligomers is ranging from 1.4×10~3 to 5.9×10~3depending on the type and alkyl length of the organolithium compounds used.