近红外光谱快速测定红花逆流提取过程中羟基红花黄色素A的含量

采用近红外光谱(NIRS)透射法对红花罐组式逆流提取过程中羟基红花黄色素A(Hydroxysafflor yellow A,HSYA)的含量进行快速无损的测定.在红花逆流提取过程中,以高效液相色谱法(HPLC)为对照分析方法,测定提取液中羟基红花黄色素A的含量,运用偏最小二乘(PLS)法建立NIR光谱与羟基红花黄色素A的HPLC分析值之间多元校正模型,并对逆流提取过程的未知样本进行含量预测.校正模型相关系数达到0.982,预测相关系数达到0.965,RMSEC和RMSEP分别为0.053和0.075,RSEC和RSEP分别为3.96%和5.25%.结果表明,NIRS可以作为一种准确、快速、无损的检测方法用于检测中药逆流提取过程有效成分含量变化规律.     

低含量高活性负载镍催化剂的制备及其加氢反应研究

以羰基镍为源, 制备了一系列高活性低含量负载镍催化剂. 采用BET、 XRD、 AAS和SEM等对催化剂进行表征. 以苯乙烯选择性加氢为探针反应, 考察了催化剂制备方法、镍含量、溶剂和反应温度、压力、时间对反应结果的影响. 结果表明, 用羰基镍制备的含镍为1%～5%的催化剂对苯乙烯的选择性加氢生成乙苯有很高的反应活性, 苯乙烯转化率和乙苯选择性分别达到了98%和99%以上.     

碳纳米管-聚(3',4'-亚乙基二氧-2,2':5',2"-三噻吩)复合材料的制备及其电化学性能研究

通过Stille反应合成了3',4'-亚乙基二氧-2,2':5',2"-三噻吩(TET),并以其作为单体,采用化学氧化原位聚合方法在碳纳米管(CNT)的表面包覆新型聚(3',4'-亚乙基二氧.2,2':5',2"-三噻吩)(FTET),制备了PTET-CNT纳米复合材料.通过TEM、SEM和IR对其进行了表征,并利用循环伏安、交流阻抗、恒电流充放电等电化学测试方法,比较研究了复合材料以及碳纳米管在0.1 mol/L四乙基四氟硼酸铵(Et_4NPF_4)的乙腈溶液中的电化学行为.实验结果表明,在电流密度为3 mA/cm~2时,PTET-CNT复合材料的比电容为86 F/g,比原碳纳米管比电容20 F/g提高了3.3倍.基于这种复合材料的电容器的能量密度达到2.02 Wh/kg.     

有机-无机复合物[Cu（en）（H_2O）（2,2-′bipy）]_2H_3[BW_（12）O_（40）]·2.5H_2O的水热合成、结构及性质

利用水热合成方法制备了组成为[Cu（en）（H2O）（2,2′-bipy）]2H3BW12O4.02.5H2O的多金属氧簇有机-无机复合物,并用元素分析、IR和UV光谱、XPS、TG、荧光光谱、X射线单晶衍射对化合物进行了表征和性质研究.该化合物属于单斜晶系,P2（1）/c空间群,a=1.951 1（2）nm,b=1.229 76（12）nm,c=2.505 9（3）nm,β=91.266（2）°,V=6.011 1（11）nm3,Z=4.化合物阴离子[BW12O40]5-与配位阳离子[Cu（en）（H2O）（2,2′-bipy）]＋通过静电作用相结合.XPS表明化合物中Cu、W氧化态分别为＋1和＋6价.     

茶螺烷酮合成的新工艺

以α-紫罗兰酮为原料,经间氯过氧苯甲酸环氧化、甲醇钠开环、超声波辐射Pd/C催化甲酸铵选择性碳碳双键加H、硼氢化钠还原、脱水环化及乙酰丙酮亚钴催化烯丙位氧气氧化等6步反应,以总收率52.6％合成了食用香料2,6,10,10-四甲基-1-氧杂-螺[4.5]-6-癸烯-8-酮(茶螺烷酮)。 用IR、1H NMR、MS谱及元素分析等测试技术表征了产物的结构和组成。     

Structural Characterization and Retention Time Prediction for Components of Essential Oil of Meconopsis Integrifolia Flowers

A molecular structural characterization (MSC) method called reduced molecular electronegativity-distance vector (MEDVR) was used to describe the molecular structures of 55 components of meconopsis integrifolia flowers. By use of stepwise multiple regression (SMR) and partial least square (PLS) methods, a model with the correlation coefficient (R1) of 0.987 and the standard deviation (SD1) of 1.377 could be obtained. Then through multiple linear regression (MLR), another model with the correlation coefficient (R2) of 0.989 and standard deviation (SD2) of 1.395 could be constructed. Furthermore, in virtue of variable screening by the stepwise multiple regression technique (SMR), 8 vectors were selected to build up another model with its correlation coefficient (R3) and standard deviation (SD3) of 0.989 and 1.366, respectively. Then all the three models were evaluated by performing cross-validation with the leave-one-out (LOO) procedure, and the correlation coefficients (QCV) were 0.981, 0.976 and 0.979, respectively. The results show that the models constructed could provide estimation stability and favorable predictive ability.     

Crystallization behavior and morphology of one-step reaction compatibilized microfibrillar reinforced isotactic polypropylene/poly(ethylene terephthalate) (<Emphasis Type="Italic">i</Emphasis>PP/PET) blends

One-step reaction compatibilized microfibrillar reinforced iPP/PET blends(CMRB) were successfully prepared through a "slit extrusion-hot stretching-quenching" process.Crystallization behavior and morphology of CMRB were systematically investigated.Scanning electronic microscopy(SEM) observations showed blurry interface of compatibilized common blend(CCB).The crystallization behavior of neat iPP,CCB,microfibrillar reinforced iPP/PET blend(MRB) and CMRB was investigated by differential scanning calorimetry(DSC) and polarized optical microscopy(POM).The increase of crystallization temperature and crystallization rate during nonisothermal crystallization process indicated both PET particles and microfibrils could serve as nucleating agents and PET microfibrils exhibited higher heterogeneous nucleation ability,which were also vividly revealed by results of POM.Compared with MRB sample,CMRB sample has lower crystallization temperature due to existence of PET microfibrils with smaller aspect ratio and wider distribution.In addition, since in situ compatibilizer tends to stay in the interphase,it could also hinder the diffusion of iPP molecules to the surface of PET phase,leading to decrease of crystallization rate.Two-dimensional wide-angle X-ray diffraction(2D-WAXD) was preformed to characterize the crystalline structure of the samples by injection molding,and it was found that well-developed PET microfibrils contained in MRB sample promoted formation ofβ-phase of iPP.     

琥乙红霉素分子印迹聚合物微球的制备及表征

以琥乙红霉素为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用悬浮聚合法制备得到了平均粒径约为60μm的琥乙红霉素分子印迹聚合物微球(MIPs),并用扫描电镜对其表面形貌进行了表征。考察了琥乙红霉素分子印迹聚合物的印迹效果,研究了琥乙红霉素分子印迹聚合物的动力学吸附特性。比较了MIPs对琥乙红霉素及其它3种抗生素的吸附情况。结果表明,制备得到的琥乙红霉素分子印迹聚合物微球对琥乙红霉素具有最好的吸附能力,显示出MIPs具有高的选择性。     

柱前衍生-反相高效液相色谱测定牛磺罗定及固体制剂含量

本文建立了对甲苯磺酰氯柱前衍生-反相高效液相色谱紫外检测法测定牛磺罗定及其固体制剂含量的方法.利用牛磺罗定中含有仲胺基的特点,以对甲基苯磺酰氯柱前衍生牛磺罗定,Venusil XBP C18色谱柱分离,在240 nm波长检测,线性范围为0.016～0.160 g·L-1(r=0.9995),衍生化产物在24 h内稳定,...     

罗丹明B分子印迹聚合物微球的合成及其在固相萃取中的应用

以罗丹明B为模板分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合法制备了罗丹明B分子印迹聚合物(MIP)微球,并用扫描电子显微镜表征。 采用紫外分光光度法测定了印迹分子罗丹明B与功能单体丙烯酰胺二者之间的结合常数(K=5.303×103 (mol/L)-1)和化学计量比(n=1)。 考察了沉淀剂的种类和用量对聚合物微球的影响。 将分子印迹聚合物微球应用于固相萃取材料自制固相萃取柱,从加标罗丹明B的红椒粉中萃取罗丹明B。 本文优化了固相萃取条件,高效液相色谱检测表明,在一定的萃取条件下,分子印迹聚合物对加标量为0.479 mg/kg的辣椒中罗丹明B的萃取加标回收率可达91.7％～103.5%。