HgCl2/I2复合催化剂协同催化合成异丙醇钇的研究

以金属钇和异丙醇为原料，以HgCl2/I2为复合催化剂，通过对金属钇的机械加工以增加其比表面，并将异丙醇脱水使其含水量降低至0．05％，体系在82℃回流5h，经过滤、减压蒸馏，得到了白色海绵状异丙醇钇，其产率高达83％，合成时间比文献报道的缩短了19h，产率提高了8％。文章确定了催化剂的最佳用量为20gY加入60mg HgCl2/I2，研究了合成产率与HgCl2/I2催化剂和HgCl2催化剂的依赖关系及异丙醇中含水量对合成产率的影响，并对HgCl2/I2的催化作用机理进行了初步探讨。     

对GDX1卷烟包装机缺商标纸检测的改进

本文介绍了一种增加GDX1卷烟包装机缺商标纸检测可靠性的方法。     

Diode-pumped 671 nm laser frequency doubled by CPM LBO

A design of diode-pumped high-efficiency Nd:YVO₄/LBO red laser is reported. Using critical phase-matching (CPM) LBO, 671 nm red laser was obtained from 1342 nm light by intracavity frequency doubling. With an incident pump laser of 800 mW, using type-I and type-II CPM LBO, 97 and 52 mWTEM₀₀ mode red laser outputs were obtained, with optical-to-optical conversion efficiencies of up to 12.1% and 6.5%, respectively.     

豫西丘陵区不同氮、钾肥用量配施对豫麦47号品质和产量的影响

在该试验条件下 ,豫麦 47号的湿面筋含量平均为 2 8.3%,吸水率、面团形成时间、稳定时间分别为 6 3.2 %、3.9分钟和 4.2分钟 ,与豫麦 47号适生区栽培条件下均有较大差异。氮肥可有效提高豫麦 47号的冬前分蘖、亩有效穗数和湿面筋含量 ,钾肥可提高亩穗数和千粒重。     

醇+N-甲基哌嗪二元体系的体积性质

采用振荡管式数字密度计分别测定甲醇、乙醇、正丙醇、异丙醇、丁正醇和异丁醇与N-甲基哌嗪组成的二元体系在298.15K下的密度，计算了超额摩尔体积、超额偏摩尔体积、表观摩尔体积、偏摩尔体积等体积性质，从分子相互作用角度讨论了这些二元体系的体积性质的变化规律，为N-甲基哌嗪的开发和研究提供基础数据和信息。     

Approaches to improving critical current density of YBCO superconducting thick films deposited by electrophoresis

The irreversibility field (Hirr) of Y-based superconductor is much higher than that of Bi-based superconductor. Y-based superconductor is capable of maintaining stable electrical currents in high magnetic field and electric field, so it is a better suited mate-rial for electric-current applications. Commonly, the Y-based tapes comprise a YBCO thick film deposited on a flexible substrate, typically with an intermediate buffer layer, and an overcoat of noble metal. In this process, the interm…     

绿洲-荒漠生态系统演化因素及其非线性探讨——以新疆为例

对立统一于干旱区的绿洲—荒漠生态系统在降水等自然因素和人类活动等人为因素的影响下不断进行着演化.从长期看,这一演化过程具有不可预测性,短期内却有细微可预见性.现如今在绿洲扩展同时,荒漠也在扩展,整体趋势仍是荒漠在扩展.为维持绿洲的稳定性,促使绿洲—荒漠系统处于一种稳定的发展趋势,本文从分析绿洲-荒漠这对对立统一的生态系统入手,在探讨引起这对生态系统演化的自然因素和人为因素的基础上,确定了自然因素中的降水和人为因素中的政府调控行为为演化的主导因素,初步探索了促使这对生态系统统演化的主导因素作用所具有的非线性关系,这对维持绿洲的稳定性,抑制荒漠扩展有一定的实际意义.     

基于C/S结构的多商户餐饮管理系统

餐饮企业的规模不断的扩大,加盟、连锁和摊位出租方式出现在越来越多的餐饮企业中,及时掌握些加盟店或者出租摊位的销售情况对管理者越来越重要.基于C/S结构的多商户餐饮管理系统就是通过先进的IC卡电子钱包(E-wallet-System)结算方式对该类餐饮企业进行管理,设计出从收款、消费到结算、统计、管理等全部电子化的解决方案并实施.     

Viscosity,particle size distribution,and structural investigation of tetramethyloxysilane/2‐hydroxyethyl methacrylate sols during the sol–gel process with acid and base catalysts

The tetramethoxysilane (TMOS)/2‐hydroxylethyl methacrylate (HEMA) hybrid gels were synthesized with acid and base catalysts, via the in situ polymerization of HEMA, with and without the cosolvent methanol. With methanol in the TMOS/HEMA sol, the enhanced esterification and depolymerization reactions of the silanols resulted in a slower growth of silica particles. The silica particles that were synthesized with an acid catalyst were less than 40 nm. The thermal resistance of the poly(2‐hydroxyethyl methacrylate) (PHEMA) chains was enhanced by the addition of colloidal silica. The Fourier transform infrared characterizations and the exothermal peaks on the differential scanning calorimetry traces of these hybrid gels indicated chemical hybridization occurring as a result of condensation of the colloid silica and PHEMA at higher temperatures. Hence, the residual weight content of the hybrid gel after its synthesis with the base catalyst was even higher than the content of TMOS in the hybrid sol. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3476–3486, 2004     

Toughness mechanism in polypropylene composites: Polypropylene toughened with elastomer and calcium carbonate

Polypropylene (PP) was modified with elastomer or CaCO₃ particles of two different sizes (1 μm and 50 nm) in various volume fractions. The dispersion morphology and mechanical properties of the two systems were investigated as functions of the particle size and volume fraction of the modifier. The brittle‐to‐tough transition occurred when the matrix ligament thickness was less than the critical ligament thickness, which was about 0.1 μm for the PP used here, being independent of the type of modifier. At the same matrix ligament thickness, the improvement of the toughness was obviously higher with the elastomer rather than with CaCO₃, but adding CaCO₃ increased the modulus of PP. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1656–1662, 2004