Synthesis of a soluble pyrrole copolymer with phenetidine

A new series of copolymers was synthesized through the oxidative polymerization of pyrrole (PY) and o‐phenetidine (PHT) with inorganic oxidants in acidic media. The polymerization parameters including the mixing method of the oxidant with the comonomer, the comonomer ratio, the time, the temperature, the oxidant, the organic medium, and the acid were systematically optimized for the synthesis of copolymers with high yields, intrinsic viscosities, and solubility. The resultant copolymers were characterized by elemental analysis, infrared, ultraviolet–visible, solution high‐resolution ¹H NMR and solid‐state high‐resolution ¹³C NMR, circular dichroism spectroscopy, and cyclic voltammetry. The results showed that the PY observed content in the copolymers was much higher than the PY feed content. The regular variation of the polymerization yield, intrinsic viscosity, solubility, macromolecular structure, and electroactivity of the resulting polymers with the comonomer ratio, together with the complete solubility of a PY/PHT (10/90) polymer in highly polar solvents, indicated the formation of real random copolymers containing both PY and PHT units rather than a mixture of two homopolymers. However, the polymers containing more than 59 mol % PY were not homogeneous copolymers consisting of soluble and insoluble parts. A semiquantitative relationship between the polymerization yield or solubility of the copolymers and the polarity index of the organic solvents was examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2073–2092, 2004     

Pressure and temperature dependence of the gas‐transport properties of dense poly[2,6‐toluene‐2,2‐bis(3,4‐dicarboxylphenyl)hexafluoropropane diimide] membranes

The gas‐transport properties of poly[2,6‐toluene‐2,2‐bis(3,4‐dicarboxylphenyl)hexafluoropropane diimide] (6FDA‐2,6‐DAT) have been investigated. The sorption behavior of dense 6FDA‐2,6‐DAT membranes is well described by the dual‐mode sorption model and has certain relationships with the critical temperatures of the penetrants. The solubility coefficient decreases with an increase in either the pressure or temperature. The temperature dependence of the diffusivity coefficient increases with an increase in the penetrant size, as the order of the activation energy for the diffusion jump is CH₄ > N₂ > O₂ > CO₂. Also, the average diffusion coefficient increases with increasing pressure for all the gases tested. As a combined contribution from sorption and diffusion, permeability decreases with increases in the pressure and the kinetic diameter of the penetrant molecules. Even up to 32.7 atm, no plasticization phenomenon can be observed on flat dense 6FDA‐2,6‐DAT membranes from their permeability–pressure curves. However, just as for other gases, the absolute value of the heat of sorption of CO₂ decreases with increasing pressure at a low‐pressure range, but the trend changes when the feed pressure is greater than 10 atm. This implies that CO₂‐induced plasticization may occur and reduce the positive enthalpy required to create a site into which a penetrant can be sorbed. Therefore, a better diagnosis of the inherent threshold pressure for the plasticization of a glassy polymer membrane may involve examining the absolute value of the heat of sorption as a function of pressure and identifying the turning point at which the gradient of the absolute value of the heat of sorption against pressure turns from a negative value to a positive one. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 354–364, 2004     

硅中铜与电子辐照缺陷的相互作用

本文研究了FZ与CZ硅中铜与电子辐照缺陷的相互作用.实验表明,这种作用使扩铜并经电子辐照的n型FZ硅出现两个未经报道的新的深中心,E(0.043)和E(0.396).前者只存在于FZ硅而不存在于CZ硅.后者在扩铜并经电子辐照的n型FZ和CZ硅中都存在.电子辐照再加适当温度的热处理还可电激活硅中的铜,另外,铜的存在还使硅中双空位的退火温度显著地降低.种种实验表明,在硅中与铜有关的六个主要能级分别对应于六种不同结构的深中心,在这些深中心之中既包含铜又包含点缺陷.其中E(0.043)很可能是铜与间隙硅原子的络合物,而E(0.167)及H(0.411)则很可能是铜与空位的不同形态的络合物.     

A projection method for solving incompressible viscous flows on domains with moving boundaries

In this paper, a projection method is presented for solving the flow problems in domains with moving boundaries. In order to track the movement of the domain boundaries, arbitrary‐Lagrangian–Eulerian (ALE) co‐ordinates are used. The unsteady incompressible Navier–Stokes equations on the ALE co‐ordinates are solved by using a projection method developed in this paper. This projection method is based on the Bell's Godunov‐projection method. However, substantial changes are made so that this algorithm is capable of solving the ALE form of incompressible Navier–Stokes equations. Multi‐block structured grids are used to discretize the flow domains. The grid velocity is not explicitly computed; instead the volume change is used to account for the effect of grid movement. A new method is also proposed to compute the freestream capturing metrics so that the geometric conservation law (GCL) can be satisfied exactly in this algorithm. This projection method is also parallelized so that the state of the art high performance computers can be used to match the computation cost associated with the moving grid calculations. Several test cases are solved to verify the performance of this moving‐grid projection method. Copyright © 2004 John Wiley Sons, Ltd.     

Crystallographic report: Crystal structure of tetra(4‐methyl‐5‐imidazole‐carboxyaldehyde)zinc(II) diperchlorate

The central zinc(II) atom in the title complex is tetrahedrally coordinated by four nitrogen atoms derived from 4‐methyl‐5‐imidazolecarboxyaldehyde ligands with Zn? N in the range 2.007(3) to 2.026(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Exploratory Investigations Probing a Preparatively Versatile, Pyridinium Salt Photoelectrocyclization-Solvolytic Aziridine Ring Opening Sequence

A novel pyridinium salt photoelectrocyclization-nucleophilic bicyclic aziridine ring opening reaction sequence has been investigated in order to determine its preparative potential. N-Alkylpyridinium perchlorates were found to undergo photoinduced electrocyclization upon irradiation in nucleophilic solvents, such as H(2)O and MeOH, to efficiently produce 6-alkyl-6-azabicyclo[3.1.0]hex-2-en-4-yl alcohols and ethers. The bicyclic aziridine photoproducts react with a number of different nucleophiles (e.g., H(2)O, MeOH, AcOH, AcSH) under acid-catalyzed conditions to produce 5-(nucleophile-substituted)-4-(alkylamino)cyclopenten-3-yl alcohols and ethers. The aziridine ring opening processes are both regioselective and stereoselective, yielding trans,trans-trisubstituted cyclopentenes exclusively, apparently as a consequence of the operation of an SN(2) mechanism. The effects of C-alkyl substitution on the regiochemistry of the pyridinium cation photocyclization reaction were briefly probed, and a method was developed to produce trans,cis-trisubstituted cyclopentenes by use of this tandem preparative sequence.     

CHLOROPHYLL PHOTOSENSITIZED ELECTRON TRANSFER IN PHOSPHOLIPID VESICLE SYSTEMS: COMPARISON OF INSIDE-OUTSIDE ASYMMETRY BETWEEN LARGE AND SMALL UNILAMELLAR VESICLES*

Abstract— We have determined the chlorophyll triplet quenching efficiencies, the chlorophyll cation radical yields and the conversion efficiencies of chlorophyll triplet to radical in large and small unilamellar phosphatidylcholine vesicles (LUV and SUV, respectively) in the presence of electrically-charged electron acceptors (ferricyanide and oxidized cytochrome c) located in either the inner or outer aqueous compartments of the vesicles. Both types of vesicles displayed inside-outside asymmetry, although the properties were reversed. Triplet quenching in SUV was more efficient when ferricyanide was located within the vesicle interior, whereas the reverse was true in LUV. When ferricyanide was located on the outside of the vesicles, the extent of triplet quenching in LUV was about two times that in SUV and the amount of cation radical formed in LUV was about two times that in SUV. Under these conditions, the conversion efficiencies of chlorophyll triplet to radical were 12.2% for LUV and 8.5% for SUV. With cytochrome c as an electron acceptor in negatively charged vesicles (25 mol per cent dixhexadecylphosphate incorporated) similar results were obtained. Again, the triplet quenching and radical yield inside-outside asymmetry properties were reversed between the two types of vesicles, and radical formation efficiencies when cyt c was located outside the vesicles were higher in LUV (11.7%) than in SUV (4.2%). We conclude that the inside-outside asymmetric photochemical behavior of unilamellar phosphatidylcholine vesicles is influenced by factors in addition to the difference in radius of curvature between the inside and outside surfaces. It is suggested that transmembrane electrostatic potentials may be involved. Furthermore, in the present system the properties of LUV were more favorable to photochemical electron transfer product formation than those of SUV.     

π -Type and σ -type cation- π complexes of atomic cations

MP2/6-31+G* calculations were performed on the cation- complexes of ethylene, cyclobutadiene and benzene with a number of atomic cations. It was found that except B⁺ all the atomic cations form -type cation- complexes with ethylene. On the other hand, with cyclobutadiene Li⁺, N⁺, Na⁺, P⁺ and K⁺ form -type complexes, whereas H⁺, F⁺, and Cl⁺ form covalent -type complexes. With benzene Li⁺, B⁺, Na⁺, Al⁺, and K⁺ form -type complexes whereas H⁺, F⁺, and Cl⁺ form -type complexes. It was concluded that the driving force to form the -type complex is chemical bonding, and that for metal cations to form -type complexes is non-covalent interaction.     

基于过滤器钩子驱动的数据包过滤研究与实现

在对Windows2000／XP操作系统下网络过滤器钩子驱动分析基础上，提出了一种在Windows2000／XP操作系统下网络数据包拦截技术．该技术巧妙地将过滤器钩子挂接到系统默认的IP过滤器驱动上，实现数据包过滤，其主要依据是利用ipfiltdrv．sys所提供的功能来拦截网络数据包．