面向大一学生的工程实践类课程的重要性研究

"卓越工程师教育培养计划"的提出,为高等工程教育工程技术人才的培养提出了更高的要求。基于卓越工程师培养目标,学生刚进入大学的最初阶段必须打好基础,为后续的学习和提高做准备。从大一学生工程素质现状调查入手,分析大一学生现状,阐明针对大一学生开设工程实践类课程的必要性,同时对这类面对大学新生的"导引式"工程实践课程的教学目标及其在学生工程能力培养过程中的重要作用进行分析研究。     

KIT-6负载CeO2催化CO2和甲醇合成碳酸二甲酯

采用不同老化温度(80、100、120和150℃)合成了一系列KIT-6载体,并通过浸渍法制备了相应的CeO_2/KIT-6催化剂。结合X射线衍射、N_2物理吸附、NH_3程序升温脱附、CO_2程序升温脱附、透射电子显微镜、傅里叶变换红外光谱和X射线光电子能谱等表征结果,详细考察了老化温度对KIT-6结构以及CeO_2/KIT-6催化剂直接催化CO_2和甲醇合成碳酸二甲酯(DMC)反应活性的影响。结果表明,不同老化温度下制备的KIT-6均保持其独特的三维孔道结构。随着老化温度升高,KIT-6比表面积先增大后减小,当老化温度为100℃时,KIT-6比表面积达到最大(683 m~2·g~(-1))。KIT-6较高的比表面积有利于提高CeO_2分散度,进而提高暴露的活性位点数量,催化活性随催化剂表面中等碱/酸性吸附位数量和Ce~(3+)含量的增加而逐渐提高。其中,CeO_2/100-KIT-6催化剂中CeO_2颗粒尺寸最小(5.9 nm),暴露的活性位数量最高,催化活性最佳。随后,考察了反应温度和压力对CeO_2/100-KIT-6催化活性的影响。随着反应温度提高,催化活性先升高后降低,当反应温度为140℃时,催化活性最高;且催化活性随反应压力的提高而逐渐增加。在反应温度为140℃、压力为6.8 MPa条件下,催化剂经6次循环后,DMC收率由15 mmol·g_(CeO_2)~(-1)逐渐降低至2.8 mmol·g_(CeO_2)~(-1),原因归结为反应过程中CeO_2纳米颗粒发生团聚,使暴露出的活性位数量减少。     

The ASACUSA CUSP: an antihydrogen experiment

In order to test CPT symmetry between antihydrogen and its counterpart hydrogen, the ASACUSA collaboration plans to perform high precision microwave spectroscopy of ground-state hyperfine splitting of antihydrogen atom in-flight. We have developed an apparatus (“cusp trap”) which consists of a superconducting anti-Helmholtz coil and multiple ring electrodes. For the preparation of slow antiprotons and positrons, Penning-Malmberg type traps were utilized. The spectrometer line was positioned downstream of the cusp trap. At the end of the beamline, an antihydrogen beam detector was located, which comprises an inorganic Bismuth Germanium Oxide (BGO) single-crystal scintillator housed in a vacuum duct and surrounding plastic scintillators. A significant fraction of antihydrogen atoms flowing out the cusp trap were detected.     

TiO2/Fe2O3异质结薄膜的制备及其光电特性的研究

通过水热法成功在FTO上制得Ti O2/Fe2O3异质结薄膜,采用场发射扫描电子显微镜(FESEM)、X射线衍射仪(XRD)、紫外-可见吸收光谱(UV-Vis)分析测试手段对样品的形貌和结构进行了表征。结果表明,Ti O2/Fe2O3异质结是由直径约200~300 nm的Ti O2纳米棒镶嵌着Fe2O3纳米颗粒组成。通过光电流测试,证明Ti O2/Fe2O3异质结的可见光光电转换效率相比Ti O2明显提高,并对Ti O2/Fe2O3异质结的光电转换机理进行了分析。     

Molecularly Designed Nanoparticles by Dispersion of Self‐Assembled Organosiloxane‐Based Mesophases

The design of siloxane‐based nanoparticles is important for many applications. Here we show a novel approach to form core–shell silica nanoparticles of a few nanometers in size through the principle of “dispersion of ordered mesostructures into single nanocomponents”. Self‐assembled siloxane–organic hybrids derived from amphiphilic alkyl‐oligosiloxanes were postsynthetically dispersed in organic solvent to yield uniform nanoparticles consisting of dense lipophilic shells and hydrophilic siloxane cores. In situ encapsulation of fluorescent dyes into the nanoparticles demonstrated their ability to function as nanocarriers.     

3D α-Fe_2O_3/掺氮石墨烯/碳纳米管复合材料及其储锂性能

针对α-Fe2O3负极在充放电过程中存在的体积膨胀及首次库伦效率低等主要问题,本文采用简单的水热法制备出具有三维多孔结构的α-Fe2O3/掺氮石墨烯(N-GNS)/碳纳米管(CNTs)复合材料。XRD,SEM,TEM及XPS等测试结果表明碳纳米管成功插入到掺氮石墨烯片层间,暴露N-GNS表面的晶格缺陷,为α-Fe2O3晶体生长提供了大量成核位点。粒径大小为30~70 nm的α-Fe2O3颗粒均匀锚定于N-GNS/CNTs三维复合碳载体内进行高效储锂反应。电化学测试结果显示,这种三维复合结构有效改善了α-Fe2O3/GNS负极的电化学性能。     

具有三维阵列结构的树枝晶CdS的制备及生长机理研究

采用电沉积和溶剂热相结合的方法,以树枝状金属Cd颗粒为模板和前驱体,在乙二胺溶剂中以六亚甲基四胺(HMTA)为表面修饰剂,制备出具有三维阵列结构的树枝晶CdS。利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)结合X射线能谱仪(EDS)等对样品的物相、形貌、元素组分和结构进行了分析。结果表明:在溶剂热反应过程中,当不加入HMTA时,得到的产物是无序的CdS纳米线;而在HMTA的作用下,则生成的是具有三维阵列结构的树枝晶CdS;通过分析溶剂热反应过程中的化学反应,并结合产物形貌演变规律,提出了具有三维阵列结构的树枝晶CdS的形成机理。光催化性能测试表明具有三维树枝晶CdS纳米阵列在可见光照射下表现出良好的光催化活性。     

猪血浆中33种类固醇激素的高效液相色谱-串联质谱测定

建立了猪血浆中雌激素、雄激素、皮质激素、孕激素以及部分违禁添加激素的高效液相色谱-串联质谱(HPLC-MS/MS)检测方法。以叔丁基甲醚为提取溶剂,涡旋振荡进行提取,采用Xselect-C18和Extend-C18(3.5μm,2.1 mm×100 mm)色谱柱进行目标物分离,外标法定量。结果表明,33种类固醇激素在其线性浓度范围内线性关系良好,相关系数均大于0.99;在3个不同浓度下的加标回收率为50.9%~119.5%,相对标准偏差为2.3%~9.8%,定量下限(LOQ)为0.05~40.00 ng/mL。采用所建立方法对北京某大型养猪场所采样品进行检测,共有10种激素被测出。该方法操作简单、灵敏度高、重现性好,可满足对猪血浆中类固醇激素的检测和验证要求。     

Proving and Probing the Presence of the Elusive C−H⋅⋅⋅O Hydrogen Bond in Liquid Solutions at Room Temperature

Hydrogen bonds (H bonds) play a major role in defining the structure and properties of many substances, as well as phenomena and processes. Traditional H bonds are ubiquitous in nature, yet the demonstration of weak H bonds that occur between a highly polarized C−H group and an electron-rich oxygen atom, has proven elusive. Detailed here are linear and nonlinear IR spectroscopy experiments that reveal the presence of H bonds between the chloroform C−H group and an amide carbonyl oxygen atom in solution at room temperature. Evidence is provided for an amide solvation shell featuring two clearly distinguishable chloroform arrangements that undergo chemical exchange with a time scale of about 2 ps. Furthermore, the enthalpy of breaking the hydrogen bond is found to be 6–20 kJ mol⁻¹. Ab-initio computations support the findings of two distinct solvation shells formed by three chloroform molecules, where one thermally undergoes hydrogen-bond making and breaking.     

采煤机自适应记忆切割

针对以往的采煤机记忆切割技术在我国复杂地质条件下不适用的情况,提出了基于模糊控制理论的采煤机自适应记忆切割技术,设计出了采煤机位置、姿态定位系统和采煤机自适应切割模糊控制系统.该系统可以获取采煤机任意位置处的姿态和状态信息,自动跟踪所记忆的切割路径,基于模糊控制理论对是否截割到岩石进行判断并做出最优的处理方案.通过实验室的路径跟踪实验和西安煤矿机械有限公司的自适应调节实验证明:该技术在实现采煤机记忆切割的基础上能够识别出滚筒到切割岩石时的异常状态,并对牵引速度和滚筒高度做自适应调节,能够满足复杂地质条件下对采煤机的控制要求.