硫脲修饰Cd掺杂ZnO水溶性量子点的制备及表征

在非水稀溶液中以聚乙烯吡咯烷酮K-30为稳定剂,硫脲为表面修饰剂,制备Cd掺杂ZnO水溶性量子点荧光体;同时研究了基质的优化及硫脲含量对ZnO量子点发光性能的影响,Eu和Li的共掺杂对ZnO:Cd量子点发光性能的影响.采用紫外光谱、荧光发射光谱、红外光谱和透射电镜、XRD对样品进行表征.结果表明:经Cd优化基质后、Eu和Li的共掺杂使量子点荧光强度明显增强;硫脲修饰后纳米颗粒分布更加均匀、晶粒更小、荧光光谱蓝移、量子点产率增加;该样品XRD衍射峰是馒头峰.属于无定形态;红外光谱图中因硫脲引起的NH2和C-NH2伸缩振动吸收峰分别为3189.0,1088.2 cm-1,硫脲修饰的最佳浓度大约为32 mg/mL.该量子点制备方法简单易行,具有较好的稳定性及高荧光量子效率,为进一步应用于生物标记奠定基础.     

High speed injection molding of high density polyethylene �� Effects of injection speed on structure and properties

Thin wall samples of high density polyethylene (HDPE) were prepared via injection molding with different injection speeds ranging from 100 mm/s to 1200 mm/s. A significant decrease in the tensile strength and Young??s modulus was observed with increasing injection speed. In order to investigate the mechanism behind this decrease, the orientation, molecular weight, molecular weight distribution, melt flow rate, crystallinity and crystal morphology of HDPE were characterized using two-dimensional wide-angle X-ray diffraction (2D-WAXD), gel permeation chromatography (GPC), capillary rheometry and differential scanning calorimetry (DSC), respectively. It is demonstrated that the orientation, molecular weight, molecular weight distribution, melt flow rate and crystallinity have no obvious change with increasing injection speed. Nevertheless, the content of extended chain crystals or large folded chain crystals was found to decrease with increasing injection speed. Therefore, it is concluded that the decrease in tensile properties is mainly contributed by the reduced content of extended chain crystals or large folded chain crystals. This study provides industry with valuable information for the application of high speed injection molding.     

Electrochemical study of thymine dimer based on DNA charge transfer

Differential pulse voltammetry was used to study the formation and level of thymine dimer in DNA duplex modified on a gold electrode. The electrochemical signal of methylene blue coupled with ferricyanide can be obtained via DNA mediated electron transfer, which would be blocked during the formation of thymine dimer. DNA duplexes with different sequences differ in the level of thymine dimer under the same UV irradiation. Futhermore, the presence of guanine base directly preceding -TT- can effectively decrease the level of thymine dimer, possibly due to the self-repair process in which guanine participates. The proposed method can be further applied to DNA self-repair analysis.     

Five-fold-symmetric macrocyclic aromatic pentamers: high-affinity cation recognition, ion-pair-induced columnar stacking, and nanofibrillation

Described in this study is a conceptually new class of five-fold-symmetric cavity-containing planar pentameric macrocycles with their interior decorated by five convergently aligned, properly spaced carbonyl oxygen atoms. These cation-binding oxygens enclose a hydrophilic lumen of 2.85 ? in radius and thus display high-affinity binding toward alkali metal cations, and possibly many other cations, too. Arising from their high-affinity recognition of metal ions, these planar macrocycles form cation- or ion-pair-induced one-dimensional columnar aggregates, and subsequently fascinating fibrillation results.     

Charge and size selective molecular transport by amphiphilic organic nanotubes

Amphiphilic constructs with accessible, nanometer-size cavities can enable selective encapsulation, separation, and purification of nanomaterials and biomacromolecules on a similar length scale. We have developed a new method for the fabrication of amphiphilic organic nanotubes from multicomponent bottlebrush copolymers with triblock terpolymer side chains. The obtained nanotubes were demonstrated to be very effective and highly selective carriers for positively charged molecules and nanometer-size macromolecules by means of liquid-liquid extractions. Unprecedented discrimination between dendrimers with about 2 nm size differential was achieved.     

An indirect competitive enzyme-linked immunosorbent assay for determination of norfloxacin in waters using a specific polyclonal antibody

A specific polyclonal anti-norfloxacin antibody was obtained, and a sensitive indirect competitive enzyme-linked immunosorbent assay (icELISA) was developed for determining trace amounts of norfloxacin in various waters. Good linearity was achieved in the range from 0.1 to 10 μg L⁻¹. The average IC₅₀ value was determined to be 2.2 μg L⁻¹ and the limit of detection was 0.016 μg L⁻¹ at a signal-to-noise ratio of 3 in phosphate-buffered saline buffer. Recoveries of norfloxacin at various spiking levels ranged from 74 to 105% in groundwater, surface water, treated and untreated wastewater samples, with relative standard deviations of 3–5%. The assay was applied for determining norfloxacin in municipal wastewater, surface water, and groundwater collected in a metropolis of China. Raw wastewater samples were only submitted to filtration and pH adjustment while the other water samples were pre-concentrated by solid phase extraction prior to the icELISA assay. Good agreement of the results obtained by the icELISA and liquid chromatography tandem mass spectrometry further confirmed the reliability and accuracy of the icELISA for rapid detection of norfloxacin in waters.     

Wettability control and patterning of PDMS using UV-ozone and water immersion

We demonstrate a simple method to tune and pattern the wettability of polydimethylsiloxane (PDMS) to generate microfluidic mimics of heterogeneous porous media. This technique allows one to tailor the capillary forces at different regions within the PDMS channel to mimic multi-phase flow in oil reservoirs. In this method, UV-ozone treatment is utilized to oxidize and hydrophilize the surface of PDMS. To maintain a stable surface wettability, the oxidized surfaces are immersed in water. Additionally, the use of a photomask makes it convenient to pattern the wettability in the porous media. A one-dimensional diffusive reaction model is established to understand the UV-ozone oxidation as well as hydrophobic recovery of oxidized PDMS surfaces. The modeling results show that during UV-ozone, surface oxidation dominates over diffusion of low-molecular-weight (LMW) species. However, the diffusivity of LMW species plays an important role in wettability control of PDMS surfaces.     

Enantioselective intramolecular Rauhut-Currier reaction catalyzed by chiral phosphinothiourea

Chiral organophosphine-catalyzed enantioselective Rauhut-Currier reaction has been disclosed for the first time. With L-valine-derived phosphinothiourea, the intramolecular Rauhut-Currier reaction of bis(enones) was achieved in good yields (up to 99%) with excellent enantioselectivities (up to 99.4% ee).     

Post-synthetic modification of epitaxially grown, highly oriented functionalized MOF thin films

Thin films of MOFs grown on solid substrates offer a huge potential with regard to tailoring the properties of a surface, in particular if used in connection with post-synthesis modification (PSM). Here, we report on the PSM of surface-supported crystalline MOFs, with target molecules using an amine-based coupling strategy.     

Thermal degradation and intumescent flame retardation of cellulose whisker/epoxy resin composite

The morphology, thermal degradation, and flame retardancy of epoxy (EP) composites containing microcrystalline cellulose whisker (MCW) and microencapsulated ammonium polyphosphate (MFAPP) were investigated using optical microscopy, limiting oxygen index (LOI), UL-94, thermogravimetry (TG), microscale combustion calorimeter, and TG-FTIR. EP/MFAPP/MCW composites can pass V-0 in UL-94 test at 6 wt% loading, and its peak heat release rate decreases when compared with EP and EP/MFAPP. The reason is that the presence of MCW strengthens the charring capacity of EP composites in a fire. The results of TG and TG-FTIR show that at low temperature, MFAPP stimulates the dehydration of MCW and EP, and produces gas which is helpful for the formation of an intumescent char. Moreover, the residue at high temperature does not release any flammable gas and is a good insulation layer on the surface of the sample, which protects the underlying material in a fire.