筏形基础一地基共同作用非线性数值分析

结合大型有限元软件ANSYS，建立了筏形基础一地基相互作用体系的全三维有限元模型．考虑土体的弹塑性性质，模拟基础和地基交界面上的状态非线性，采用中厚板理论分析筏板，对筏形基础的受力进行了非线性数值分析．结果表明，考虑地基非线性特性时，地基反力及基础沉降的计算结果更接近实际．     

多量子比特纯态纠缠刻画研究的一些进展

对多量子比特纯态纠缠刻画研究的一些进展作了介绍．首先介绍了三量子比特纯态情形对称正则形式的特点和LU多项式不变量与随机LOCC分类的关系．随后对多量子比特纯态的分类和纠缠的度量作了一些讨论，并指出紧致相对熵纠缠度不具有LU不变性以及Wei的几何纠缠度的不足．     

基于Windows NT平台上的RAS技术在无线电监测系统中的应用

介绍了在无线电监测系统中，如何解决移动车载站中的计算机与局域网里固定监测站中的计算机之间的远程通讯问题、通过RAS(远程访问服务)建立一个类似于局域网的广域网，实现固定监测站与移动车载站之间以及不同移动车载站之间的远程连接和数据通讯．详细描述了如何配置RAS服务器和客户端的计算机；怎样在程序中建立远程连接和进行数据传输；并针对无线电监测网要求是一个无中心网络的特点，设计了稳定高效的C／S软件模型结构并选择不同的数据传输协议处理不同类型的数据信息。     

一种IP/DWDM光因特网中的路由选择机制

研究了一种资源约束最短路径优先 (RCSPF ,Resource ConstrainedShortestPathFirst)路由选择机制·这种机制可以用于扩展以通用多协议标记交换GMPLS为基础的IP/DWDM光因特网控制平面·借助光网络设备的可编程功能 ,在现有开放最短路径优先OSPF协议基础上 ,增加基于资源的路由约束条件 ,在一定程度上减少发生网络拥塞的可能性·另外 ,由于采用源路由以及在选路由过程中采用资源预分配机制 ,因此增强了对GMPLS信令系统的支持·同时 ,为了解决在资源不足情况下造成的信道分配失败问题进一步提出了相对路由的概念 ,使IP/DWDM光因特网在大幅增加带宽容量的同...     

矿井水资源化可行性研究

矿井水资源化是解决矿区水问题的最佳选择，针对目前矿井水的综合处理利用率低且处理成本很高这一现实以及阜新矿区严重缺水的状况，进行矿井水资源化的可行性研究，研究矿区生活饮用水、生产用水的处理方法及处理设施，并根据“优质水优用，低质水低用”的原则，推荐最优方案，确定最佳工艺流程，可供生产设计参考。     

单层柱面网壳在多点输入下的地震反应

采用可考虑行波效应和部分相干效应的人工合成多点地震动，同时考虑网壳结构的材料非线性和几何非线性，对柱壳在多点输入下的地震反应进行计算，并与一致输入下的地震反应进行对比，考察二者之间的差异；深入分析了大跨度单层柱面网壳结构在多点输入下的地震反应规律，得出一些有益于工程实际的重要结论．     

基于三点弯曲试验研究合金化镀层剥落机制

通过三点弯曲试验,利用电子探针(EPMA)、扫描电镜(SEM)及金相显微镜(OM)研究了合金化镀锌板(GA)不同应力状态(压应力、拉应力)下裂纹的扩展、延伸及镀层的剥落.结果表明:锌层从合金化炉出来冷却过程中锌层中的裂纹产生于δ和Γ相中.在变形过程中,压应力和拉应力侧裂纹的扩展和锌层的剥落机制不同.在拉应力一侧,裂纹沿着垂直板面的方向延伸,到达Γ-αFe界面,沿着平行于Γ-αFe界面继续延伸,与第二条裂纹接触后,锌层剥落;在压应力一侧,裂纹沿着与板面成一定角度的方向扩展,最后镀层剥离或者在δ相内或者与拉应力一侧相同,到达Γ-αFe界面后,沿着Γ-αFe界面延伸最后产生破坏.实验结果还表明,镀层在压应力条件下更容易产生粉化现象.     

Sulfinate Esters from Methoxymethyl Sulfides

Several benzene (or phenylmethane) sulfinate esters were synthesized in 53–98% yields from the corresponding methoxymethyl (MOM) sulfides employing NBS as oxidant.     

Structural and functional stabilities of artificially designed DNA ultra-thin films grown by silica Assistance

We report the structural and functional stabilities of artificially synthesized DNA ultra-thin films. Fully covered DNA ultra-thin films on a silica substrate were fabricated by the silica-assisted growth method and those samples were then incubated in various chemicals and physical conditions. The DNA ultra-thin films showed high maintainability under those harsh conditions and these results would aid to facilitate the use of artificial DNA ultra-thin films in advanced research areas such as biophotonics and bioelectronics.     

Refolding of Laccase in Dilution Additive Mode with Copper-Based Ionic Liquid

Ionic liquids (ILs) are molten salts which do not crystallize at room temperature. Tunable physicochemical properties of ILs including hydrophobicity and polarity facilitate their applications in many biological processes. In this study, a copper-based IL was employed in order to enhance the refolding efficiency of laccase from Trametes versicolor which requires copper as a cofactor. When 1-ethyl-3-methylimidazolium trichlorocuprate ([EMIM][CuCl₃]) was added to refolding buffer instead of urea, the laccase refolding yield was improved more than 2.7 times compared to the conventional refolding buffer which contains urea. When the refolding of laccase was carried out at different temperatures (4, 25, and 37 °C), the highest refolding yield was obtained at 25 °C. At low temperature, two conflicting effects, i.e., suppression of the aggregate formation and decrease of folding rate, influence the protein refolding. In contrast, a copper-based IL did not enhance the refolding of lysozyme, a non-copper-containing protein. From these results, we can conclude that this copper-based IL, [EMIM][CuCl₃], was exclusively effective on the refolding process of a copper-containing protein.