Synthèse partielle et propriétés oncostatiques des pseudo-tubulosines,analogues de l'émétine et de la tubulosine

Partial Synthesis and Oncostatic Properties of Pseudotubulosines, Analogues of Emetine and Tubulosine Pseudotubulosines, structural analogues of emetine and tubulosine, have been synthesized by either Pictet-Spengler or Bischler-Napieralski condensation from dihydrocorynantheal or corynantheidal. Spectral data, cytotoxic and oncostatic properties of these new alkaloids are described.     

Microanalysis of polymers using a windowless energy-dispersive X-ray detector

The surface compositions of various polymeric films, grown electrochemically on platinum foils, have been investigated by energy-dispersive x-ray analysis in conjunction with scanning electron microscopy (SEM/EDS). Comparison of the relative area ratios of peaks for the C and N K_emission lines show that the EDS may be used to study the surface composition of polymers. The evidence presented strongly suggests that there is limited structural degradation and the elemental composition is not changed under the electron beam at relatively low accelerating voltages. This technique statistically samples the repeat units of the polymer. For samples grown in both aqueous and nonaqueous solutions. SEM/EDS provides evidence for extensive contamination with oxygen.     

An expedient esterification of aromatic carboxylic acids using sodium bromate and sodium hydrogen sulfite

Treatment of aromatic carboxylic acids and substituted toluenes with a mixture of sodium bromate and sodium hydrogen sulfite in a two-phase system gave the corresponding esters in good yield. The intermediate α-brominated toluene was formed by the in situ generated hypobromous acid. The α-bromotoluene underwent an intermolecular nucleophilic substitution reaction with aromatic carboxylic acids present in the reaction mixture to afford the corresponding esters.     

Effect of Dosimetric and Physiological Factors on the Lethal Photosensitization of Porphyromonas gingivalis in vitro

The aims of this study were to (1) determine the effect of dosimetric and physiological factors on the lethal photosensitization of Porphyromonas gingivalis using tolui-dine blue O (TBO) and light from a helium/neon (HeNe) laser; (2) determine the influence of sensitizer concentration, preirradiation time, serum and growth phase on sensitizer uptake by P. gingivalis. The dosimetric factors studied were concentration of TBO, light dose and preirradiation time. The physiological factors were presence of serum, pH and bacterial growth phase. Sensitizer uptake by P. gingivalis under various conditions was determined using tritiated TBO (³H-TBO). In the presence of TBO, a light dose-dependent increase in kill was attained (100% kill at 4.4 J). There was no significant effect on the numbers killed when TBO was increased from 12.5 to 50 µg/mL. An increase in preirradiation time gave slightly increased kills. High kills were achieved at all three pH (6.8–8.0). Although kills were substantial in the presence of serum, they were significantly less than those obtained in the presence of saline. Cells in all three growth phases were susceptible to lethal photosensitization, although stationary phase cells were slightly less susceptible. Maximum uptake of TBO occurred within 60 s and uptake in serum was less than in saline. The uptake by the log phase cells was greater at lower concentrations of sensitizer (50 µg/mL), compared to the other two phases.     

3D－QSAR Study on Diindolylmethane and Its Analogues with Comparative Molecular Field Analysis(CoMFA)

Comparative molecular field analysis (CoMFA),a three dimensional quantitative structure-activity relationship (3D-QSAR) method was applied to a series of diindolylmethane(DIM) analogs to study the relationship between their structure and their induction of CYP 1A1-associated ethoxyresorufin-O-deethylase(EROD) activity.A DISCO model of pharmacophore was derved to guide the superposition of the compounds.The coefficient of cross-validation (q^2) and non cross-validation(r^2) for the model established by the study are 0.827 and 0.988 respectively,the value of variance ratio (F) is 103.53 and standard error estimate (SEE)is 0.044.These values indicate that the CoMFA model derived is significant and might have a good prediction for the catalytic activity of DIM compounds.As a consequence,the predicted activity values of new designed compounds were all higher than that of the reported value.     

Extraction of some elements of the groups IV b and VI b with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) from aqueous mineral acid solutions

Solvent extraction of Cr(VI), Mo(VI), W(VI) and Hf(IV) with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) in methyl isobutylketone (MIBK), xylene and chloroform (CHCl₃) from mineral acid solutions was studied. Chromium(VI) is not extracted from any of the acids studied (HCl, H₂SO₄ and HClO₄). Molybdenum(VI) is quantitatively extracted by the reagent in xylene and CHCl₃ from HClO₄ and HNO₃ solutions. It is also extracted quantitatively by the reagent in MIBK from HCl, HNO₃ and H₂SO₄ solutions but the participation of the diluent as extractant is considerable. Tungsten(VI) is quantitatively extracted in xylene from 9M HClO₄ solution. MIBK used as diluent also affects its extraction with PMCP. Hafnium(IV) is not extracted from H₂SO₄ solutions while it extracts more than 99% at 3M HNO₃ and above. The extracted species likely are: MoO₂(PMCP)₂, WO₂(PMCP)₂ and Hf(PMCP)₄, respectively.     

Flow and heat transfer with prescribed skin friction in a rotating fluid

This paper investigates the rotating flow and heat transfer of a viscous fluid induced by a stretching surface. The nonlinear problem subject to a given skin friction at the boundary is solved. Analytic solution is obtained using homotopy analysis method. The velocity, temperature, and stretching velocity is calculated for different values of the rotation parameter (λ). The obtained results are compared with the well known results of rotating flow induced by a stretching surface by using four sets of boundary conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Simultaneous effects of induced magnetic field and heat and mass transfer on the peristaltic motion of second‐order fluid in a channel

In this article, we investigate the influence of heat and mass transfer on the peristaltic flow of magnetohydrodynamic second‐order fluid in a channel when the induced magnetic field effects are present. Problem formulation in a wave frame of reference is presented. The governing nonlinear analysis is carried out under the assumption of small wave number. Explicit expressions of the pressure gradient, the stream function, the magnetic force function, the axial induced magnetic field, the current density distribution, the temperature, and the concentration distribution are derived. The effects of embedded parameters are also examined. Copyright © 2011 John Wiley & Sons, Ltd.     

Melting heat transfer in the stagnation‐point flow of an upper‐convected Maxwell (UCM) fluid past a stretching sheet

The steady laminar boundary layer flow and heat transfer past a stretching sheet arre considered. Upper‐convected Maxwell (UCM) fluid is treated as a rheological model. The resulting nonlinear differential system is solved by homotopy analysis method (HAM). The influence of melting parameter (M), Prandtl number (Pr), Deborah number (β) and stretching ratio (A = a/c) on the velocity and temperature profiles is thoroughly examined. It is noticed that fields are effected appreciably with the variation of parameters. Furthermore, it is seen that the local Nusselt number is a decreasing function of melting parameter. Copyright © 2011 John Wiley & Sons, Ltd.