苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

Strong adhesion and smooth conductive surface via graft polymerization of aniline on a modified glass fiber surface

The goal of this paper is to prepare surface-conductive glass fibers. The fibers were first hydroxylated, after which they were reacted with 3-bromopropyltrichlorosilane to form a bromopropylsilane monolayer, which was further reacted with aniline to substitute the bromine atoms. The surface-bound aniline molecules were used as active sites for the graft polymerization of polyaniline (PANI). The composition, structure and the morphology of the modified glass fiber surface were examined by X-ray photoelectron spectroscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The method generated a smooth and homogenous thin layer of PANI on the surface of the glass fiber with a surface conductivity of about 6 S/cm, hence larger than the usual value ( approximately 1 S/cm) of the bulk polyaniline.     

Thermal Behaviour and Decomposition Kinetics for Two Palladium(II) Complexes with 1-aminopyrene and its Derivative

The thermal decomposition studies for two palladium(II) complexes Pd(apyr)₂Cl₂ and Pd(pmpa)Cl₂ (apyr=1–aminopyrene and pmpa=N–(2–pyridylmethylene)–1–pyrenylamine) were carried out in pure nitrogen using TG-DTG techniques. The non-isothermal kinetic parameters for the two complexes were evaluated employing the method suggested by Málek, esták, Koga et al. Based on the above results, thermal behaviour of the complexes were carefully discussed, which showed that not only the parameters value, but also the decomposition pattern and mechanism for complex 1 are different from complex 2.This revised version was published online in November 2005 with corrections to the Cover Date.     

两亲性丙烯酸酯共聚物的聚合研究

利用过氧化苯甲酰为引发剂探讨了甲基丙烯酸β－羟乙酯和丙烯酸长链烷基酯的自由基共聚合。重点讨论了合成条件如溶剂、沉淀剂、引发剂用量、单体配比、反应时间等对共聚反应的影响以及各种聚合条件对该共聚物的组成、结构和性能的影响。并用ＩＲ，ＧＰＣ，＾１３ＣＮＭＲ等手段对共聚物进行了表征。     

Synthesis,crystal structure and reaction of differentially ring-substituted titanocene dichlorides

Summary A new class of differentially ring-substituted titanocene dichlorides of the type CpCpTiCl₂ has been prepared by reacting CpM (M=Li, K; Cp=RC₅H₄) with CpTiCl₃ (Cp=MeOCH₂CH₂C₅H₄). The crystal structure of Cp(PhCEt₂C₅H₄)TiCl₂, the first example, has been determined by x-ray diffraction and refined to a final R factor of 0.0532 for 2304 reflections. The crystal belongs to the monoclinic space group C _2h ⁵ –P2₁/c with unit cell parameters:a 10.205(6),b 13.003(5),c 17.591(9) Å, 101.91(4)°, V=2284 ų, Z=4 and Dc=1.32 g/cm^–3. Replacement of one neomenthyl in bis(neomenthyl-cyclopentadienyl)titanium dichloride by one MeOCH₂CH₂ — raises the e.e. value from 5.8% to 11.2% in the catalytic asymmetric hydrogenation of 2-phenyl-1-butene.     

Structural Determination of Bis-histidinopeptide Zinc Complexes by 15N NMR (HMBC) Spectra

Polynitrogen receptors such as bis-histidine peptides possess strong ability to bind metals, which play much important roles in medicinal, bioinorganic, bioorganic, biomimetic and supramolecular chemistry. In order to investigate the interaction of these hosts with a variety of neutral, cationic and anionic guests, several techniques, for example, NMR,potentiometric tirations and monocrystal X-ray diffraction have been employed. Among them NMR is a powerful technique for unraveling the structure of polynitrogen receptors as long as they are in solution where the rapid tumbling of molecules averages out the anisotropies such as chemical shift and dipole-dipole interactions. General 1H NMR approach has been widely used for the study of host-guest interaction, but it is difficult for the accurate measurement in complexes structures, particularly metal complexes structures in which how the polynitrogen receptors bind metal, and which nitrogen binds metal and so on.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Quality evaluation of fingerprints of herbal medicine with chromatographic data

In this study, local least squares (LLS) and principal component analysis (PCA) were applied to deal with the disturbances in a data set of chromatographic fingerprints after necessary data transformations. It has been demonstrated that PCA with standard normal variate (SNV) transformation of data led to meaningful classification of 33 different Erigeron breviscapus herbal samples. The result was also corroborated by variance squares discriminant method. The quality of herbal objects was further evaluated, and the causes of this fact have been explained from a chemical point of view. At the same time, it implied an idea for qualitative evaluation of the herbal objects with a common class pattern of chromatographic fingerprints.     

桑蚕丝素蛋白初始结构对其矿化作用的影响

以碱金属离子诱导桑蚕丝素蛋白溶液发生构象转变, 研究了蛋白质初始结构对其矿化作用的影响. FT-IR, XRD和SEM等测试结果显示, 未经任何处理的桑蚕丝素蛋白溶液矿化后形成片状复合物, 其无机相以二水磷酸氢钙(DCPD)为主; 而经过K^＋和Na^＋金属离子处理后, 桑蚕丝素溶液的结构由无规线团/螺旋构象向β-折叠发生转变, 矿化后成纤维状, 并相互结合呈现纳米级的三维多孔结构, 其无机相以热力学稳定的羟基磷灰石(HA)为主. 可以认为, 丝素蛋白结构转化为较伸展的β-折叠后, 使得更多的亲水基团暴露在外面, 在丝素蛋白分子不断凝聚成纤过程中, HA结晶快速生长并附着在这些微纤上, 最终形成纤维状的丝素蛋白/HA复合物. 该结果为阐明蛋白质的生物矿化过程及其调控机理提供了理论依据, 同时可以从矿化复合物的形成来反映这些微量元素可能对骨组织形成的影响, 为临床骨组织的修复提供一定的参考.     

Comparison of triel bonds with different chalcogen electron donors: Its dependence on triel donor and methyl substitution

The complexes between R₃Tr (Tr = B, Al, and Ga; R = H, F, Cl, and Br) and H₂X (X = O, S, and Se) were theoretically studied. The interaction energies of R₃Al⋯H₂X and R₃Ga⋯H₂X are consistent with the electronegativity of the halogen atom R (R ≠ H), but an opposite dependence is found for R₃B⋯H₂X. The triel bond of R₃Tr⋯H₂X is weaker for the heavier chalcogen donor. The dependence of triel bonding strength on the triel atom is complicated, depending on the nature of R and X. The methyl substitution of H₂X causes a substantial increase in the interaction energy from −5.74 kcal/mol to −22.88 kcal/mol, and its effect is relevant to the nature of Tr, X, and R groups. For the S and Se donors, the increased percentage of interaction energy is almost the same due to the methyl substitution, which is larger than that of the O analogue. In most triel-bonded complexes, electrostatic dominates and polarization has comparable contribution. However, polarization plays a dominant role in R₃B⋯ and R₃B⋯ (R = Cl and Br; R′ = H and Me).