Facile synthesis and high d33 of single-crystalline KNbO3 nanocubes

Single-crystalline KNbO(3) nanocubes with orthorhombic phase were prepared in a large scale by a simple one-step molten salt route without using any surfactant as template; the nanostructures exhibited high piezoelectric properties such as d(33)=105 pC/N and k(p)=0.34 as piezoelectric materials.     

Heritability and linkage study on heart rates in a Mongolian population

Elevated heart rate has been proposed as an independent risk factor for cardiovascular diseases, but their interrelationships are not well understood. In this study, we performed a genome-wide linkage scan in 1,026 individuals (mean age 30.6 years, 54.5% women) from 73 extended families of Mongolia and determined quantitative trait loci that influence heart rate. The DNA samples were genotyped using deCODE 1,039 microsatellite markers for 3 cM density genome-wide linkage scan. Correlation analysis was carried out to evaluate the correlation of the covariates and the heart rate. T-tests of the heart rate were also performed on sex, smoking and alcohol intake. Consequently, this model was used in a nonparametric genome-wide linkage analysis using variance component model to create a multipoint logarithm of odds (LOD) score and a corresponding P value. In the adjusted model, the heritability of heart rate was estimated as 0.32 (P<.0001) and a maximum multipoint LOD score of 2.03 was observed in 77 cM region at chromosome 18. The second largest LOD score of 1.52 was seen on chromosome 5 at 216 cM. Genes located on the specified locations in chromosomes 5 and 18 may be involved in the regulation of heart rate.     

beta-Diketiminate aluminium complexes: synthesis, characterization and ring-opening polymerization of cyclic esters

A series of aluminium alkyl complexes (BDI)AlEt(2) (3a-m) bearing symmetrical or unsymmetrical beta-diketiminate ligand (BDI) frameworks were obtained from the reaction of triethyl aluminium and the corresponding beta-diketimine. The monomeric structure of the aluminium complex 3k was confirmed by an X-ray diffraction study, which shows that the aluminium center is coordinated by both of the nitrogen donors of the chelating diketiminate ligand and the two ethyl groups in a distorted tetrahedral geometry. Attempt to synthesize beta-diketiminate aluminium alkoxide complexes by the reactions of monochloride complex "(BDI-2a)AlMeCl" (4) with alkali salts of 2-propanol gave unexpectedly an aluminoxane [(BDI-2a)AlMe](2)(micro-O) (7) as characterized by X-ray diffraction methods. Complexes 3a-m and [(2,6-(i)Pr(2)C(6)H(3)NCMe)(2)HC]AlEt(2) (8) were found to catalyze the ring-opening polymerization (ROP) of epsilon-caprolactone with moderate activities. The steric and electronic characteristics of the ancillary ligands have a significant influence on the polymerization performance of the corresponding aluminium complexes. The introduction of electron-donating substituents at the para-positions of the aryl rings in the ligand resulted in an apparent decrease in catalytic activity. Complex 3h showed the highest activity among the investigated aluminium complexes due to the high electrophilicity of the metal center induced by the meta-trifluoromethyl substituents on the aryl rings. The increase of steric hindrance of the ligand by introducing ortho-substituents onto the phenyl moieties also resulted in a decrease in the catalytic activity. Although the viscosity average molecular weights (M(eta)) of the obtained poly(caprolactone)s increased with the enhancement of monomer conversion, the ROPs of epsilon-caprolactone initiated by complexes 3a-m and 8 were not well-controlled, as judged from the broad molecular weight distributions (PDI = 1.66-3.74, M(w)/M(n)) of the obtained polymers and the nonlinear relationship of molecular weight versus monomer conversion.     

Determination of tetracyclines residues in honey by on-line solid-phase extraction high-performance liquid chromatography

An automated system using on-line solid-phase extraction (SPE) high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection was developed for the determination of tetracyclines (TCs), such as tetracycline (TC), oxytetracycline (OTC), chlortetracycline (CTC), metacycline (MC), and doxycycline (DC) in honey. One milliliter diluted honey sample was injected into a conditioned C18 SPE column and the matrix was washed out with water for 3 min. By rotation of the switching valve, TCs were eluted and transferred to the analytical column by the chromatographic mobile phase. Chromatographic conditions were optimized. TCs were separated in less than 8 min with a gradient elution using a mixture of 0.8% formic acid and acetonitrile. The UV detection was performed at 365 nm. The conditions for on-line SPE, including solvent and total time for loading sample and washing matrix were also optimized. Time for extraction and separation decreased greatly. For the five kinds of TCs, the limits of detection (LODs) at a signal-to-noise of 3 ranged from 5 to 12 ng g⁻¹. The relative standard deviations (R.S.D.) for the determination of TCs ranged from 3.4 to 7.1% within a day and ranged from 3.2 to 8.9% in 3 days, respectively.     

Stereoselective α-galactofuranosylation and synthesis of di- and tetrasaccharide subunits of cell wall polysaccharides of Talaromyces flavus

Stereoselective α-galactofuranosylation employing 2′-carboxybenzyl glycosides as galactosyl donors has been established. The tetrabenzyl-protective group on the galactosyl donor was essential for the α-galactosylation of secondary alcohol acceptors. The present method was successfully applied to the synthesis of di- and tetrasaccharide subunits of cell wall polysaccharides of Talaromyces flavus.     

Effect of metal compounds on thermal degradation behavior of aliphatic poly(hydroxyalkanoic acid)s

Effect of metal compounds on the thermal degradation behaviors of poly(3-hydroxybutyric acid) (P(3HB)), poly(4-hydroxybutyric acid) (P(4HB)), and poly(?-caprolactone) (PCL) was investigated by means of thermogravimetric and pyrolysis-gas chromatograph mass spectrometric analyses. Na and Ca compounds accelerated a random chain scission of P(3HB) molecules resulting in a decrease of thermal degradation temperature, whereas the contribution of Zn, Sn, Al compounds to the thermal degradation of P(3HB) was very small. In contrast to P(3HB), Zn, Sn and Al compounds induced the thermal degradation of PCL at lower temperature range by catalyzing the selective unzipping depolymerization from ω-hydroxyl chain end. Transesterification reaction of PCL molecules could be facilitated by the presence of Ca compound, while the gravimetric change was detected at almost identical temperature region regardless of the content of Ca compound. According to the lactonizing characteristic of monomer unit, the thermal degradation of P(4HB) progressed by the cyclic rupture via unzipping reaction from the ω-hydroxyl chain end or/and random intramolecular transesterification at the main chain with a release of γ-butyrolactone as volatile product. Each of metal compounds used in this study was effective to catalyze the cyclic rupture of P(4HB) molecules, and the degradation rate was accelerated by the presence of metal compounds.     

Franck–Condon simulation of photoelectron spectroscopy of HOO: Including Duschinsky effects

Geometry optimization and harmonic vibrational frequency calculations were performed on the and states of HOO and state of HOO⁻. The electron affinity and the term energy () of HOO were calculated at various theory levels. Franck–Condon analyses and spectral simulations were carried out on the and photodetachment processes. The spectral simulations of vibrational structures based on the computed Franck–Condon factors are in excellent agreement with the observed spectra. In addition, the equilibrium geometrical parameters of the state of HOO⁻ and state of HOO were obtained in the spectral simulations.     

Evaluation of headspace-gas chromatography/mass spectrometry for the analysis of benzene in vitamin C drinks; pitfalls of headspace in benzene detection

Recently, there have been reports regarding the presence of benzene in vitamin C drinks. This is caused by sodium benzoate and ascorbic acid (vitamin C), which can react together to induce benzene formation. While the headspace gas chromatography method is well known for the detection of benzene, there could be pitfalls in the process of benzene extraction. This study was performed to check if benzene could be generated under high-temperature incubation conditions. As a result, the amount of benzene detected by headspace-gas chromatography/mass spectrometry (HSGC/MS) was affected by temperature changes. As the temperature of the sample vial was increased, newly generated benzene from the headspace also increased, causing false-positive determination of benzene. Although 80 degrees C is generally accepted for the temperature of headspace sample vials, lower temperatures, such as 40 degrees C, minimize the false-positive identification of benzene. Considering that this minimization allows benzene to be quantified at around 5 ppb, this lower temperature should definitely be considered since benzene, which is formed in sodium benzoate, can appear in vitamin C drinks under certain circumstances. The proposed analysis method of benzene in vitamin C drinks by HSGC/MS at 40 degrees C is an accurate and universal method for the monitoring of benzene without false-positive identification.     

Comparative studies on adsorption behavior of thionine on gold nanoparticles with different sizes

The adsorption behavior of thionine on gold nanoparticles of two different mean diameters, 18 and 5 nm, was compared by using UV-vis spectroscopy, fluorescence spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), dynamic light scattering (DLS), and quantum chemical calculations. It is found that the addition of small particles makes the monomer peak of thionine finally disappear, and the corresponding dimer peak is significantly increased. Small gold nanoparticles make the equilibrium between the monomer and H-type dimer forms of thionine move largely toward the dimer forms. Due to the stronger binding between thionine and small gold nanoparticles, the fluorescence quenching of thionine by small particles is enhanced compared to large particles, and the quenching is both static and dynamic. TEM images indicate that the addition of thionine results in a heavy clustering for small particles, and the resulting thionine-gold nanoclusters of about 45 nm were obtained. Quantum chemical calculations, which were based on the density functional theory (DFT) at the B3LYP level, and infrared spectroscopic studies show that the nitrogen atoms of the NH(2) moieties of thionine bind to the gold nanoparticle surfaces. For 18 and 5 nm particles, the surface-to-volume atomic ratios are about 0.0597 and 0.2148, respectively. The higher surface-to-volume atomic ratio and the higher surface free energy result in stronger binding of thionine on small particle surfaces, which can be used to modulate the arrangement of dye molecules on particle surfaces, and thus control the properties of organic-inorganic nanocomposite materials.