Separation of related opiate compounds using capillary electrochromatography

Capillary electrophoretic separations have been investigated for six controlled narcotic analgesic compounds having related structures. Owing to the similar charge-to-mass ratios of these compounds, capillary zone electrophoresis failed to provide a satisfactory separation, whereas a baseline-resolved separation was achieved in 10 min using micellar electrokinetic chromatography. Column efficiencies of 40,000-150,000 plates/m were obtained with a 50 cm long, 50 microm inner diameter (ID) capillary using 50 mM sodium dodecyl sulfate (SDS) in a 50 mM borate solution containing 12% isopropanol. In contrast, separation of this mixture by capillary electrochromatography proved to be significantly superior. The capillary was 15 cm long, with an ID of 75 microm, and was packed with 1.5 microm nonporous octadecyl silica (ODS) particles. The mobile phase consisted of 80% 10 mM tris(hydroxymethyl)aminomethane (Tris) and 20% acetonitrile, and contained 5 mM SDS. A complete separation was obtained in 2.5 min with an efficiency of 250,000-500,000 plates/m.     

Formation of mono(dithiolene)-thiocarboxamido complexes in reactions of thio(dithiocarbamato)-Mo/W complexes and dimethyl acetylenedicarboxylate

Reactions of TpMS(S(2)CNEt(2)) with dimethyl acetylenedicarboxylate in dichloromethane produce olive green/black TpM{S(2)C(2)(CO(2)Me)(2)}(SCNEt(2)-kappa(2)S,C) (M = Mo (1), W (2); Tp = hydrotris(3,5-dimethylpyrazol-1-yl)borate). The seven-coordinate complexes exhibit pseudo-octahedral (1) and distorted pentagonal bipyramidal (2) coordination spheres comprised of tridentate fac-Tp, bidentate dithiolene, and thiocarboxamido-kappa(2)S,C ligands. In the solid state, molecules of 1 exhibit pseudo-C(s)() symmetry, with the thiocarboxamide NEt(2) group in a cleft in the Tp ligand. Molecules of 2 have C(1) symmetry in the solid state; here, the thiocarboxamide unit is orientated along one of the W-S(dithiolene) bonds with its NEt(2) group projecting away from the Tp ligand. Both complexes possess effective C(s)() symmetry in solution. Reaction of TpMoI(CO)(3) with AgS(2)CNEt(2) affords olive green TpMo(S(2)CNEt(2))(CO)(2) (3), which reacts with propylene sulfide in a new synthesis for TpMoS(S(2)CNEt(2)), the starting material for 1. Complex 3 exhibits a distorted pentagonal bipyramidal structure, the axial sites being defined by a Tp nitrogen atom and a carbonyl ligand, the pentagonal plane by the remaining nitrogen and carbonyl donors and the two sulfur atoms of the bidentate dithiocarbamate ligand.     

Proximity effect in spin sublevel dynamics: Possible influence of a low-lying3 A2 (nπ*) state: On singlet → triplet intersystem crossing of Pyrimidine

Comparison of spin sublevel population rates in pyrimidine and 5-methylpyrimidine suggests that the vibronic perturbation of ³B₂ and/or ³A₁ ππ* states by a higher-lying ³A₂nπ* state plays an important role in S₁ → T₁ intersystem crossing of pyrimidine. The result also implies that the n₊π*—n_?π* splitting in pyrimidine is significantly smaller than the corresponding gap in pyrazine. The appearance of the 0.0 band in the τ_x spectrum indicates that the triplets state symmetry is lower tha C_2v.     

Spectroscopic properties of various quinolone antibiotics in aqueous-organic solvent mixtures

The spectroscopic properties of enoxacin (ENO), oxolinic acid (OXO) and nalidixic acid (NAL) were studied in various H2O-CH3OH and H2O-CH3CN mixed solvents because these solvents were thought to behave as a biological mimetic system. ENO has piperazinyl group, but OXO and NAL do not have this substituent. The fluorescence emission spectra of ENO were very sensitive to the composition of the solvents. In the Lippert-Mataga analysis of the steady-state fluorescence data, clear reverse solvatochromism was exhibited for ENO in both mixed solvents. This observation can be explained using the excited state twisted intramolecular charge transfer (TICT) from the nitrogen of the piperazinyl group to the keto oxygen. Theoretical calculations further support this observation. The nonradiative and radiative rate constants of these molecules were analyzed as a function of dipolarity-polarizability (pi*) and hydrogen bond donor acidity (alpha) of the mixed solvents. These results for ENO were consistent with the suggested mechanism of the TICT very well. The influence of bulk dielectric effect was more significant relative to the specific hydrogen bonding interactions. The emission spectra of OXO and NAL do not exhibit any characteristic responses to the properties of the solvent.     

Effect of polyether diamine on gas permeation properties of organic-inorganic hybrid membranes

The quantitative incorporation and high dispersion of platinum nanoparticles into MCM-41 has been carried out by the coordination between Pt(IV) ion and APTMS-anchored MCM-41. Before and after calcination of Pt/APTMS/MCM41 samples, the Pt content in samples was evaluated from home-made photoacoustic spectrometer (PAS). The PAS bands at 350 nm and 450 nm can be assigned to d–d transition bands of Pt complexes. By increasing the concentration of Pt solution, the PAS intensity of Pt/APTMS/MCM41 was increased proportionally up to 1.0×10⁻² M, and remained constant above 1.0×10⁻² M. It can be attributed to the saturation of Pt content within Pt/APTMS/MCM41. The Pt content in the saturated Pt/APTMS/MCM41 was 8.5 wt% (the theoretical value), 9.7 wt% (measured by EDX) and 9.2 wt% (measured by ESCA), respectively. This indicates that the content of Pt precursor within MCM-41 could be controlled by the concentration of Pt precursor solution. The PAS intensity of calcined Pt/APTMS/MCM41's in H₂ flow was increased up to 1.0×10⁻² M and remained nearly constant above 1.0×10⁻² M. Therefore, we suggest that the formation of Pt complexes with APTMS-anchored MCM-41 made it possible to incorporate quantitatively Pt nanoparticles in the range of 0.5–9.2 wt% within MCM-41 channels.     

Room-temperature luminescence study on the effect of Mg activation annealing on p-GaN layers grown by MOCVD

An Mg-doped p-GaN layer was grown by the metalorganic chemical vapor deposition method. The dissociation extent of hydrogen-passivated Mg acceptors in the p-GaN layer through Mg activation annealing was estimated by using room-temperature cathodoluminescence (CL) spectroscopy. The CL measurement revealed that the CL spectra intensities tend to increase with increasing the activation annealing temperature. The sample annealed at 925 °C showed the most intense emission and the narrowest width among the emission peaks. Consequently, it was the most excellent dissociation extent of Mg–H complexes caused by the Mg activation annealing. The hole concentration under this optimum condition was 1.3×10¹⁷ cm⁻³ at room temperature. The photoluminescence (PL) measurement showed a 2.8 eV band having characteristically a broad peak in heavily Mg-doped GaN at room temperature. By analyzing the PL results, we learned that this band was associated with the deep donor–acceptor pair (DAP) emission rather than with the emission caused by the transition from the conduction band to deep acceptor level. The four emission peaks in the resolved 2.8 eV band were emitted by transiting from deep donor levels of 0.14, 0.26, 0.40, and 0.62 eV below the conduction band to the shallow Mg acceptor level of 0.22 eV above the valence band.     

Influence of various activation temperatures on the optical degradation of Mg doped InGaN/GaN MQW blue LEDs

GaN-based InGaN/GaN multi-quantum-well light emitting diode (MQW LED) structures were grown by metal organic chemical vapor deposition method. The optical properties of the LED structure have been investigated by using the photoluminescence and electroluminescence measurement. Both photoluminescence and electroluminescence results indicate that near pure InN clusters exist within the InGaN layers, which are responsible for the light emission in the LED. With increasing the Mg activation temperature of p-GaN layer, the optical properties of the LED structure tended to significantly degrade. This degradation was found to be deeply related to the variation of InN clusters in the active region. By the current–voltage measurement, a large forward voltage variation was observed. The voltage variation is caused to the conductivity variation of the p-GaN layer due to the different activation temperature. The turn-on voltage obtained from the best LED was 2.56 V and the forward voltage measured at 20 mA was 3.5 V. On the basis of these results, activation of the Mg-doped p-GaN layer must be carried out at the lowest possible value so as to obtain the better performance of LEDs.     

Effects of growth temperature on the properties of ZnO/GaAs prepared by metalorganic chemical vapor deposition

A series of ZnO films were grown on GaAs(0 0 1) substrates at different growth temperatures in the range 250–720°C by metalorganic chemical vapor depostion. Field emission scanning electron microscopy was utilized to investigate the surface morphology of ZnO films. The crystallinity of ZnO films was investigated by the double-crystal X-ray diffractometry. The optical and electrical properties of ZnO films were also investigated using room-temperature photoluminescence and Hall measurements. Arrhenius plots of the growth rate versus reciprocal temperature revealed the kinetically limited growth behavior depending on the growth temperature. It was found that the surface morphology, structural, optical and electrical properties of the films were improved with increasing growth temperature to 650°C. All the properties of the film grown at 720°C were degraded due to the decomposition of ZnO film.     

Molecular dynamics for very large systems on massively parallel computers: The MPSim program

We describe the implementation of the cell multipole method (CMM) in a complete molecular dynamics (MD) simulation program (MPSim) for massively parallel supercomputers. Tests are made of how the program scales with size (linearly) and with number of CPUs (nearly linearly) in applications involving up to 10⁷ particles and up to 500 CPUs. Applications include estimating the surface tension of Ar and calculating the structure of rhinovirus 14 without requiring icosahedral symmetry. © 1997 by John Wiley & Sons, Inc.     

The antimalarial agent halofantrine perturbs phosphatidylcholine and phosphatidylethanolamine bilayers: a differential scanning calorimetric study.

The interaction of halofantrine with phosphatidylcholine and phosphatidylethanolamine bilayers has been investigated by differential scanning calorimetry. Halofantrine caused a broadening of the gel to liquid crystalline phase transition endotherm of the phosphatidylcholines. A decrease in the transition temperature Tm and enthalpy (delta H) of transition was also observed. This varied with the chain length of the phospholipid and was more pronounced with short chain members. Halofantrine-induced changes to the thermotropic characteristics of dipalmitoylphosphatidylcholine (DPPC)/cholesterol bilayers suggested that the penetration of halofantrine into the bilayer was diminished in the presence of cholesterol. A more complex calorimetric profile was observed in the interaction of halofantrine with phosphatidylethanolamines and the results suggested that halofantrine did not disrupt the cooperativity of the phosphatidylethanolamine bilayers to the same extent as that observed with the phosphatidylcholines. Halofantrine caused significant perturbation of phospholipids and this property might have an important bearing on its pharmacodynamic effects.