Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Highly soluble and optically transparent poly (ether imide)s based on 2,6‐ or 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and aromatic bis(ether amine)s bearing trifluoromethyl groups

Two series of novel fluorinated poly(ether imide)s (coded IIIA and IIIB ) were prepared from 2,6‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride, respectively, with various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal or chemical imidization of the poly(amic acid) precursors. These fluorinated poly(ether imide)s showed good solubility in many organic solvents and could be solution‐cast into transparent, flexible, and tough films. These films were nearly colorless, with an ultraviolet–visible absorption edge of 364–386 nm. They also showed good thermal stability with glass‐transition temperatures of 221–298 °C, 10% weight loss temperatures in excess of 489 °C, and char yields at 800 °C in nitrogen greater than 50%. The 2,7‐substituted IIIB series also showed better solubility and higher transparency than the isomeric 2,6‐substituted IIIA series. In comparison with nonfluorinated poly (ether imide)s, the fluorinated IIIA and IIIB series showed better solubility, higher transparency, and lower dielectric constants and water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5909–5922, 2006     

螺纹联接动载荷强度计算公式的探讨

该文以柴油机的连杆螺栓联接(非标准件)为例,在微机上用动力有限元方法对螺栓各圈螺牙的载荷分布,螺栓的静、动应力分布进行了计算与研究。提出了较材料力学经验公式精确的既简单又实用的螺纹联接的动载荷强度计算公式。     

Preparation of AgBiVMoO/-Al2O3 Catalysts for the Partial Oxidation of Propane

A novel mixed sol method was developed for the preparation of supported catalysts. Analyses by means of XRD and BET show that a 40%AgBiVMoO/γ-Al2O3 catalyst prepared by this method possessed high specific surface area and high dispersion of the active phase. As a result, high acrylic acid selectivity of 8.5% was obtained when the catalyst was used in the reaction of propane partial oxidation to acrylic acid in a fixed-bed reactor.     

传感法研究固态钢中镧活度

本文采用LaF3单晶固体电解质测量了473～1223K温度范围内钢中镧的活度.两个平行样品的活度值符合很好,并且LaF3单晶的起始工作温度约为880K.     

Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

吉木萨尔陆相页岩油微观赋存类型

为了更好地认识页岩油微观赋存状态及类型,避免实验过程中水钻取样对原油分布的影响,选取吉木萨尔页岩典型含油岩芯,采用全程液氮钻、切、磨制样工序,通过全能谱扫描电子显微镜、二次电子成像及背散射相结合的技术手段,获得微观储层矿物类型和结构、储集空间类型、形貌以及C, O, Si, Al, Ca, K, Na,Mg等元素在微、纳米尺度的分布。依据去除矿物因素后的C元素含量分布,判别原油在微、纳米空间尺度的富集程度。结合矿物岩石组构和储集空间形貌,对微、纳米尺度页岩油原油的赋存状态及分布类型进行直观的定量表征,并基于C元素含量推测微观含油饱和度的相对变化。针对原油与孔喉的配置关系,进行储层微观孔喉结构与原油赋存状态的表征,明确原油赋存类型。总结出研究区4种微观原油赋存类型:白云质溶蚀微米级大孔道中的可动油、砂质粒间微纳米级孔中可动油、砂质粒间孔喉壁吸附的半束缚状态的油膜以及自生黏土矿物晶间孔内束缚油。     

论明清石湾陶艺的美学特色

明清是石湾陶艺创作风格、艺术特色的奠基时期。明清石湾陶艺注重表现,富有生活气息,简约质朴,豪放自然,尤其在人物眼神与衣纹的刻划、“素胎烧制”等艺术表现技巧方面所作出的探索,终经后来历代艺人的发扬光大,已成为今天石湾陶艺所特有的“有意味的形式”,并展示出强烈的艺术魅力。     

反胶束溶液和血红蛋白水溶液相平衡的研究

研究了十六烷基三甲基溴化铵－正庚烷反胶束溶液和牛血红蛋白水溶液的相平衡,探讨了有机相助表面活性剂种类和浓度、水相ｐＨ值、水相离子种类和强度、表面活性剂浓度的影响,适宜条件下,牛血红蛋白的萃取率可达９５％以上。对实验结果从表面活性剂极性头与蛋白质分子间的相互作用和反胶团包溶蛋白质时的空间阻碍作用上进行了解释。     

关于运城地区发展经济林的反思

优越的农业自然条件使运城地区成为山西省重要的粮棉生产基地。但近年来经济林的迅速发展使果树栽植面积几乎占到耕地总面积的1／4。尽管平原地区广种经济林具有一定的经济效益与环境效益,但它却违背了合理利用土地的原则,若不及早采取有力措施加以控制,我国将会潜伏粮食危机,种植业的可持续发展将会受到严重影响。