Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

Numerical analysis of the rotating viscous flow approaching a solid sphere

A numerical simulation is performed to investigate the flow induced by a sphere moving along the axis of a rotating cylindrical container filled with the viscous fluid. Three‐dimensional incompressible Navier–Stokes equations are solved using a finite element method. The objective of this study is to examine the feature of waves generated by the Coriolis force at moderate Rossby numbers and that to what extent the Taylor–Proudman theorem is valid for the viscous rotating flow at small Rossby number and large Reynolds number. Calculations have been undertaken at the Rossby numbers (R_o) of 1 and 0.02 and the Reynolds numbers (R_e) of 200 and 500. When R_o=O(1), inertia waves are exhibited in the rotating flow past a sphere. The effects of the Reynolds number and the ratio of the radius of the sphere and that of the rotating cylinder on the flow structure are examined. When R_o ? 1, as predicted by the Taylor–Proudman theorem for inviscid flow, the so‐called ‘Taylor column’ is also generated in the viscous fluid flow after an evolutionary course of vortical flow structures. The initial evolution and final formation of the ‘Taylor column’ are exhibited. According to the present calculation, it has been verified that major theoretical statement about the rotating flow of the inviscid fluid may still approximately predict the rotating flow structure of the viscous fluid in a certain regime of the Reynolds number. Copyright © 2004 John Wiley & Sons, Ltd.     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

Investigation on chaotic motion in hysteretic non-linear suspension system with multi-frequency excitations

This paper presents the investigation on possible chaotic motion in a vehicle suspension system with hysteretic non-linearity, which is subjected to the multi-frequency excitation from road surface. The Melnikov’s function is used to derive the critical condition for the chaotic motion, and then it is investigated that the effects of parameters in non-linear damping on the chaotic field. The path from quasi-periodic to chaotic motion is found via Poincaré map and Lyapunov exponents.     

Phase Measurement Algorithm in Wavelength Scanned Fizeau Interferometer

Wavelength scanned interferometry allows the simultaneous measurement of top surface shape and optical thickness variation of a transparent object consisting of several parallel surfaces. Interference signals from these surfaces can be separated in frequency space, and their phases are detected by discrete Fourier analysis. However, these signal frequencies are shifted from the detection frequency by the refractive index dispersion of the object and a nonlinearity of the wavelength scanning. The Fourier analysis is sensitive to the detuning of the signal frequency and suffers from the multiple-beam interference noise. Conventional error-compensating algorithms cannot be applied to an object consisting of more than three reflecting surfaces. We derive a new 2N-1 sample error-compensating algorithm, which allows the phase detection of any order of harmonic frequency among the interference signals. The new algorithm suppresses the effect of signal frequency detuning as well as the multiple-beam interference noise and can be applied to the measurement of complex objects consisting of more than three reflecting surfaces.     

The 7th Asian Symposium on Visualization

The 7th Asian Symposium on Visualization (7ASV) was successfully held in Singapore from 3^rd to 7^th November 2003. This event was originally scheduled from 26^th to 30^th May 2003, but had to be postponed because of the outbreak of SARS (Severe Acute Respiratory Syndrome) in some parts of the world. A total number of 122 participants attended the Symposium of which, 107 were foreign participants from 16 countries (excluding Singapore) worldwide. There were 104 papers covering broad range of topics presented at the Symposium which were delivered in 2×7 long sessions, and 9 keynote papers.     

Modification of Spatial Coherence by Means of Low-Order Zernike-Mode Adaptive Optics

Spatial coherence of the field modified by low-order adaptive optics is analyzed to establish a theoretical basis for the recent idea of using adaptive optics as a spatial coherence modifier. In this context low-order adaptive optics has the ability to correct some of the low-order aberrations specified by Zernike polynomials. The initial field to be modified is assumed to be a spatially partially coherent one resulting from phase disturbance. It is demonstrated, as in the previous study, that low-order adaptive optics serves to enhance the spatial coherence of the resultant field and that the effect of the enhancement becomes stronger as the spatial coherence of the initially partially coherent field increases. Potential applications of low-order adaptive optics as a spatial coherence modifier are briefly discussed.     

Elasticity and inelasticity of biomorphic silicon carbide ceramics

The effect of the vibration strain amplitude on the Young modulus and ultrasonic absorption (internal friction) in biomorphic SiC ceramics is investigated in the temperature range 116–296 K. The biomorphic SiC ceramics is prepared through pyrolysis of eucalyptus with subsequent infiltration of silicon. It is demonstrated that the vibration loading of samples in air and under vacuum is accompanied by a number of unexpected effects. The behavior of the studied ceramics is governed by at least two mechanisms, which, to a large extent, are responsible for the elastic and inelastic properties of the material. One mechanism is associated with the adsorption-desorption of environmental molecules (hypothetically, owing to the presence of pores and residual carbon), and the other mechanism involves microplastic deformation due to the motion of dislocations or other (similar) structural units.     

<Emphasis FontCategory="NonProportional">L</Emphasis>-Matrices and solvability of linear complementarity problems by a linear program-Matrices and solvability of linear complementarity problems by a linear program

The classes ofL ₁-matrices,L ₂-matrices,L ₃-matrices andW-matrices are introduced to study solvability of a linear complementarity problem via solving a linear program. Three sufficient conditions are presented to guarantee that a linear complementarity problem is solvable via a linear program. The new sufficient conditions are weaker than the ones introduced by Mangasarian. This fact is also illustrated by an example. Partially supported by NSFC. This author is also with College of Business Administration of Human University as a Lotus chair professor.