热解二氧化钛/聚苯胺制备高效非贵金属氧还原电催化剂

为了克服传统Pt系催化剂价格昂贵、稳定性差的缺点,采用热解新型Ti O2/聚苯胺(PANI)复合物的方法合成了Ti O2/C催化剂.用扫描电子显微镜、X射线光电子能谱、X射线衍射、傅里叶变换红外光谱、拉曼光谱、透射电子显微镜、循环伏安法和线性扫描伏安法等方法研究了热处理和PANI复合比例对复合物的形貌、成键、晶相组成及氧还原性能的影响.结果表明,PANI与Ti O2间存在相互作用,可以抑制Ti O2的团聚和锐钛矿向金红石的转变.热处理制得Ti O2/C的氧还原活性随着PANI载体含量增加先升高后降低,PANI和Ti O2质量比为35/100时,催化剂的氧还原活性最高.同时,循环伏安和时间-电流曲线测试表明,已制备的复合材料在催化氧还原反应进行时具有较好的稳定性.     

Heterogeneous oxidation of cyclohexanone catalyzed by TS-1:Combined experimental and DFT studies

The reaction mechanism of the oxidation of cyclohexanone catalyzed by titanium silicate zeolite TS-1 using aqueous H2O2 as the oxidant was investigated by combining density function theory (DFT) calculations with experimental studies. DFT calculations showed that H2O2 was adsorbed and activated at the tetrahedral Ti sites. By taking into account the adsorption energy, molecular size, steric hindrance and structural information, a reaction mechanism of Baeyer-Villiger oxidation catalyzed by TS-1 that involves the activation of H2O2 was proposed. Experimental studies showed that the major products of cyclohexanone oxidation by H2O2 catalyzed by a hollow TS-1 zeolite wereε-carprolactone, 6-hydroxyhexanoic acid, and adipic acid. These products were analyzed by GC-MS and were in good agreement with the proposed mechanism. Our studies showed that the reaction mechanism on TS-1 zeolite was different from that on Sn-beta zeolite.     

Study on preparation and properties of polyether polytriazole elastomers

To explore the application of click chemistry in the field of elastomer materials, propargyl-terminated ethylene oxide-tetrahydrofuran copolymer(PTP(E-co-T)) was prepared from hydroxyl-terminated ethylene oxide-tetrahydrofuran copolymer(P(E-co-T)) by end-etherisation modification. FTIR and 13C-NMR results indicate that P(E-co-T)-terminated hydroxyl was etherified thoroughly, yielding the target product PTP(E-co-T), and the content of terminated alkynyl of PTP(E-co-T) was evaluated to be 0.428 mmol·g-1. Using a polyazide compound as a cross-linker, polytriazole elastomers with various functional molar ratio(R) values were prepared from PTP(E-co-T) by virtue of the Cu AAC reaction. Mechanical property tests indicate that with the increase in R, the modulus E and stress σb of the polytriazole elastomers first increase and subsequently decrease, whereas the strain first decreases and later increases. The mechanical properties of the polytriazole elastomers show a parabolic dependence on the R value. Near the stoichiometric ratio, E and σb show maxima and the strain εb shows a minimum. Swelling tests demonstrate that the apparent molecular weight of polytriazole elastomer strands also first decreases and subsequently increases. At the stoichiometric ratio, the network structure possesses strands with a minimum apparent molecular weight and a maximum apparent density. Dynamic mechanical analysis reveals that the polytriazole elastomers presented damping peaks at approximately-64 °C, corresponding to the glass transition of copolyether strands, and the elastomer exhibited the lowest dissipation factor tanδ at the stoichiometric ratio. Thermal analysis suggests that the weight-loss process of the polytriazole elastomer is characteristic of one-step decomposition, and the elastomer begins to decompose from polyether strands, not triazole groups.     

Asymmetric Synthesis of Fully Substituted Cyclopentane‐Oxindoles through an Organocatalytic Triple Michael Domino Reaction

An efficient, highly stereoselective asymmetric synthesis of fully functionalized cyclopentanes bearing an oxindole moiety and several other functional groups in one pot has been developed. Key step is an organocatalytic triple Michael domino reaction forming three C?C bonds and six stereocenters, including a quaternary one. Starting from equimolar amounts of simple substrates, a high molecular complexity can be reached after a Wittig olefination in one pot. The new protocol can easily be scaled up to gram amounts.     

Sr_2CeO_4:Nd~(3+)纳米粒子的合成和近红外发光

采用甘氨酸-硝酸盐燃烧法制备了Sr2CeO4和Sr2CeO4:Nd3+发光纳米粒子。样品的结构及性质采用XRD,TEM,荧光光谱及荧光衰减曲线等进行表征。在1200℃煅烧1h能够得到均匀的类球形Sr2CeO4:Nd3+纳米粒子,其粒径大小为20~40nm,并具有良好的分散性和高效的近红外发光特性。Nd3+合适掺杂浓度为0.15%(摩尔分数)。对Sr2CeO4:Nd3+近红外发光的机制分析表明:通过基质Sr2CeO4吸收紫外光,基团CeO4发生了电荷转移达到激发态,并将激发态能量传递给了Nd3+,从而使Sr2CeO4:Nd3+产生了特征的近红外发射。     

Stereochemical determination of tetrahydropyran-substituted xanthones from fungus Chaetomium murorum

Chaetoxanthone D (1), a new tetrahydropyran-substituted xanthone originated from polyketide pathway, together with the four known natural products chaetoxanthone C (2), alternariol methyl ether (3), alternariol (4) and 2,5-dimethyl-7-hydroxychromone (5) was isolated from a strain of Chaetomium murorum. The structures of these compounds were elucidated based on extensive spectroscopic analyses. The absolute configurations of 1 and 2 were determined by using quantum chemical electronic circular dichroism (ECD) calculations.     

Determination of five sesquiterpenoids in Xingnaojing injection by quantitative analysis of multiple components with a single marker

A quantitative analysis of multiple components with a single‐marker method was established for the simultaneous determination of five sesqutiterpenoids in Xingnaojing injection. This method was established with Xingnaojing injection determined by high‐performance liquid chromatography coupled with diode array detection. The durability and system suitability of the established method were evaluated, and the reliable relative correction factors were obtained with curdione selected as an internal reference. The contents of the five components in all Xingnaojing injections were determined by external standard method and the contents of curcumenone, curcumenol, curzerenone, and germacrone were also calculated with the obtained relative correction factors. Then, relative error was investigated to estimate the difference of the two methods. As a result, the established new method possesses good adaptability, and there is no significant difference between the two methods, except for the content of curzerenone in eight samples. To put the established method into practice, the limits of quantitation of the established method of the five components were proposed and defined. Thus, the developed methodology can also be utilized to the quality evaluation of Xingnaojing injection, in spite of the difference found in the content of curzerenone between the external standard method and the newly established method.     

原子荧光光谱法测定萤石中的微量铅

以铁氰化钾–盐酸羟胺体系代替铁氰化钾–草酸体系,建立原子荧光法测定萤石中铅含量的方法。对实验条件进行了优化,在负高压280 V,灯电流65 m A,原子化高度8 mm,还原剂3%硼氢化钾溶液(含0.5%Na OH),载流4%盐酸的工作条件下,铁氰化钾–盐酸羟胺体系有明显的增感作用。样品中Ca~(2+)含量在4 g/L之内不影响铅的测定,溶解阶段通过高氯酸冒烟赶尽HF排除氟离子的干扰,并加入硫氰酸钠–邻菲罗啉消除铁和铜等离子的干扰。测定铅的线性范围为0~80 ng/L,相关系数r=0.999 6,方法检出限为0.187μg/L,测定结果的相对标准偏差为0.25%~1.40%(n=12),加标回收率为97.8%~104.5%。该方法测定结果与电感耦合等离子体原子发射光谱法测定结果相符。原子荧光光谱法快速准确,基体干扰少,灵敏度高。     

圆偏振光在手性聚合物合成与结构调控中的应用

手性是自然界中普遍存在的有趣现象之一,在生命体中手性大分子特有的不对称结构在维持生命过程、新陈代谢和进化等面均起着决定性作用.受此启发,合成具有新型结构的光学活性聚合物,研究其独特的物理化学性质和功能已成为当今高分子领域研究的热点.左旋和右旋的圆偏振光已被广泛应用于氨基酸衍生物的不对称光合成、光分解和去消旋化反应,以及诱导含有偶氮苯或三苯胺等特定功能基团的超分子组装体或无机纳米粒子形成稳定螺旋结构.本文详细地介绍了圆偏振光辐照在手性聚合物合成与螺旋结构调控中的应用,初步揭示了圆偏振光的作用机制以及优势,归纳总结了已取得的研究进展,并对圆偏振光在手性聚合物合成与结构调控中的应用及发展进行了简单的评述和展望.