Ga1-xInxAs/InAsyP1-y/InP异质结的MOCVD生长及表征

Ga1-xInxAs(x>0.53)材料是未来长距离低损耗光纤通信的理想光源材料和探测器材料之一.我们采用水平常压MOCVD系统,在InP衬底上成功地生长了Ga1-xInxAs(x>0.53)/InAsyP1-y/Inp异质结材料.其中InAs1-yPy为组份阶梯变化的多层结构.由样品的(400)面X光衍射结果测定了各层组份.由二次离子质谱(SIMS)得到了样品剖面组份变化结果,证明InAs1-yPy层组份为阶梯状变化的.通过对光致发光结果和X光衍射结果比较,可以看到,InAsyP1-y层通过位错和弹性畸变二种方式来释放或积累Ga1-xInxAs与InP间的失配应力,从而减少了Ga1-xInxAs中的失配位错.有效地改善了Ga1-xInxAs的质量.已获得了x高达0.94表面光亮的Ga1-xInxAs/InAs1-yPy/InP异质结材料.     

新型全固态铁离子敏感电极研究

采用稀土电极材料六硼化镧制备了一种新的全固态铁离子敏感电极。研究了该敏感电极在常见介质中对Ｆｅ３＋的响应行为。结果表明，该铁离子敏感电极在１．５ｍｏｌ／ＬＨ３ＰＯ４介质中的线性响应范围、检测下限和响应斜率分别为１．０×１０－５～１．０×１０－１ｍｏｌ／ＬＦｅ３＋，６．０×１０－６ｍｏｌ／ＬＦｅ３＋和６０ｍＶ／ｐＣ，且具有较好的选择性。     

山东威海卫饮用天然矿泉水生成背景与水质评价的研究

本文论述了山东威海卫饮用天然矿泉水的生成条件，对其界限指标、限量指标、污染物指标、微生物指标等进行了综合评价，确定其为重碳酸型的含锶、偏硅酸优质矿泉水．     

Z域正实函数及其定理

定义了一种新的函数──Ｚ域正实函数（Ｚ－ＰＲＦ）；导出了该函数的一些性质和定理．     

热辐射驱动烧蚀平面金靶的数值定标定律

利用一维辐射流体力学编码数值研究了辐射烧蚀波在平面金靶中的传播情况,并在常温边界条件下得到了辐射流、烧蚀压、质量烧蚀率和特征等离子体密度的定标定律。     

PARAMETER ESTIMATION OF SPATIAL AR MODEL

Consider a stable AR model of two parameter spatial series {X_t, t∈N~2}, i. e. {X_(t)t∈N~2} is homogeneous and satisfies the following difference equationX_t-sum from n=s∈相似文献   

Explicit bounds on some new nonlinear integral inequalities with delay

The purpose of the present note is to establish some new delay integral inequalities, which provide explicit bounds on unknown functions and generalize some results of Li et al. [Some new delay integral inequalities and their applications, J. Comput. Appl. Math. 180 (2005) 191–200]. The inequalities given here can be used to investigate the qualitative properties of certain delay differential equations and delay integral equations.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

Investigation on crosslinking behaviors of NBR/PVC filled with anhydrous copper sulfate particles by dynamic mechanical analysis

Crosslinking behaviors of acrylonitrile butadiene rubber (NBR)/poly (vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, were investigated for the first time by dynamic mechanical analysis (DMA) under hetero and isothermal modes, respectively. In the heterothermal testing, (NBR/PVC)/CuSO₄ compound showed two marked increases in the storage modulus (E′), corresponding to coordination crosslinking of NBR-CuSO₄ and self-crosslinking of NBR and PVC respectively. During the isothermal testing, a dramatic increase in E′ was found at the initial stage while that of original NBR/PVC alloy was not detected. The marked increase in E′ of (NBR/PVC)/CuSO₄ compound was mainly due to the crosslinking induced by coordination between  CN and Cu²⁺. The increasing extent of E′ increased with the rise of CuSO₄ content, suggesting the formation of a greater number of crosslinks. Moreover, the activation energy (E_a) of crosslinking process was about 139 kJ/mol. In this work, fourier transform infrared spectrum (FT-IR) and equilibrium swelling method were also performed for the characterization of the compound. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 41–51, 2007