DCS和FCS及其在火电厂中的应用

介绍了集散控制系统和现场总线控制系统，并对它们在火电厂中的应用做了分析。     

论法律部门的划分标准与经济法的地位

传统法律部门的划分因其片面强调客观性和按法律调整的社会关系的性质来划分法律部门而有着固有的、难以弥补的缺陷，因此要令人信服地说明经济法作为独立的部门法的地位，就必须抛弃旧的框框，按主客观一致，以主观为主导的指导思想。重新来确定法律部门的划分标准。     

两段绞接式联合收割机输送槽的设计研究

本文介绍一种适宜配置在悬挂式联合收割机上的两段铰接式输送槽设计,这种输送槽后段固定,前段与割台连接并与后输送槽铰接,该铰接点为前悬挂割台的支点,借助液压油缸升降,文中对该铰接点位置的确定,以及两段输送槽铰接处的圆弧过渡板设计进行了分析研究,提供了设计方法.     

最优化法在计算平台破损后浮态及初稳性中的应用

提出了一种用优化方法求解平台破损进水后浮态和初稳性的方法,并用所编制的计算机程序对平台破损后的浮态和初稳性进行了计算。文中给出了某一平台在下沉就位过程中的计算实例,计算结果表明:利用优化方法来求解平台破损进水后的浮态和初稳性是切实可行的.     

预测气吹精密播种机排种质量的一种简易方法

通过对气吹式精密播种机田间试验资料的相关分析，发现合格指数Ａ与｜Ｄ－Ｍ｜（重播指数与漏播指数之差的绝对值）之间里极显著负相关（ｒ＝－０．９３１２）。在对数据作进一步回归分析的基础上，本文建立了一套“由排种粒数预测排种质量”的方法。     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.     

Ionic liquid-regulated sulfamic acid: chemoselective catalyst for the transesterification of β-ketoesters

1-Propyl-3-methylimidazolium chloride ([C₃MIm]Cl) ionic liquid and sulfamic acid (NH₂SO₃H), as a synergetic catalytic medium, were used for the transesterification of acetoacetate with alcohols of different structures. It shows the good ability for the chemoselective transesterificatin of β-ketoesters and maintains its catalytic activity in the reuse.