Liquid chromatographic determination of the plasticizer di(2-ethylhexyl) phthalate (DEHP) in PVC plastics

A fast, simple and reliable method for the analysis of DEHP in PVC products was developed using a one-step Soxhlet extraction prior to HPLC determination. The linear range from 1.25 /g to 250 mg/g of DEHP in PVC was found sufficient to cover the normal concentrations encountered. The reliability of the method was established by comparison with the ASTM method and no potential interferent was identified except a large concentration of DIMP.     

Reaction cross sections in the ten-nucleon system

The properties of the 10-nucleon system are investigated with a multiconfiguration resonating-group method, which consists of +⁶Li,d+⁸Be,d+⁸Be^*, and +⁶Li^* cluster configurations, where⁶Li^* and⁸Be^* represent the rotational excited-states of⁶Li and⁸Be with orbital angular momentum equal to 2. The results show that, among reactions initiated from the +⁶Li incident channel, the inelastic-scattering process⁶Li(,)⁶Li^* dominates. The -transfer reactions⁶Li(,d)⁸Be and⁶Li(,d)⁸Be^* have smaller cross sections, but still contribute, on the average, to about one-third of the +⁶Li total reaction cross sections in the centre-of-mass energy region between 12 and 24 MeV. The calculated +⁶Li total reaction cross section at 27 MeV is equal to around 70% of the empirical value obtained by analyzing +⁶Li differential scattering cross-section data. This is a respectable amount, considering the complexity of the problem and that no adjustable parameters are involved in the calculation. Based on the findings of this and previous investigations, some general criteria which govern the importance of cluster-transfer processes in light nuclear systems have also been obtained. These criteria should be very useful in qualitatively understanding the behaviour of other systems that have hitherto not been studied with the multi-configuration resonating-group method.     

光伏模组积灰与阴影特性分析及识别方法

针对光伏模组积灰与阴影特性识别问题,详细分析了积灰和阴影的光伏特性曲线差异,揭示了阴影光伏曲线的拐点时变特性。提出由特性曲线的拐点数量及电流电压特性条件共同构成训练模型的输入特征量,基于CatBoost算法训练积灰和阴影识别模型。最后,利用光伏模组实测数据对CatBoost算法、ID3和GA-BP算法训练出的识别模型进行性能分析和对比测试,结果表明基于CatBoost训练出的识别模型输入量区分性强、诊断精度高,极具工程应用价值。     

Critical slope gradient for compulsory abandonment of farmland on the hilly Loess Plateau

Scientific evidence for the upper limit of farmland is proposed. Shallow gully erosion is one of erosion types distributed extensively on sloping farmland in the hilly regions of the Loess Plateau. Field observation and aerial photos interpretation, as well as laboratory experiments show that the shallow gully erosion occurring on the steeper farmland in the hilly regions of the Loess Plateau is an important factor leading to intensive erosion on slope, because of its extensive distribution and intensive runoff collection. The data on the formation, development and distribution of shallow gullies on sloping farmland indicate that critical slope gradient for shallow gully initiation ranges from 15 to 20 degrees with an average of 18.2 degrees. Therefore, it is suggested that critical slope gradient for compulsory abandonment of farmland on the hilly Loess Plateau should be kept within the critical slope gradient for shallow gully initiation to prevent shallow gully formation in order to control soil loss more effectively. But as the first step, the cultivation on the slopes with slope larger than 25 degrees where the maximum erosion occurs should be strictly forbidden.     

离散正交小波包及其在噪声抑制中的应用

研究有限长序列的小波包处理和噪声抑制的方法,方法用正交共轭滤波器构造有限维内积空间的正交值和分解及有限长离散小波包,分析了噪声的小波包分解系数的特性,并提出小波包变换域降噪的方法。     

WC—Co硬质合金刀片热丝法金刚石薄膜涂层附着力

用热丝法研究了ＷＣ－６％Ｃｏ硬质合金刀片金刚石薄膜涂层附着力。结果表明：采用温度为８０℃,（ＨＣｌ：ＨＮＯ３：Ｈ２Ｏ）（体积比）为１∶１∶１溶液对硬质合金刀片表面去Ｃｏ１５ｍｉｎ后,经４０ｕｍ金刚石粉及１．５ｕｍ金刚石加２０ｕｍＴａＣ混合粉进行超声预处理,结果表明,沉积的金刚石薄膜与硬质合金刀片基底具有良好的附着力,而经４０ｕｍ金刚石粉处理的薄膜涂层组织与附着力要好一些。     

微波合成PMMA胶乳粒子

在常压微波辐照下合成聚甲基丙烯酸甲酯（ＰＭＭＡ）单分散的胶体微粒。体系中未加表面活性剂和稳定剂,在透射电镜下观察粒子的形状和直径大小,并得出在引发剂浓度一定的条件下,微粒的体积与单体的浓度呈现线性关系,为我们合成一定大小的超细微粒提供了选择的条件。功力学实验表明,微波场下反应速度大大加快,反应是突变的,无恒速阶段。     

New evidence for the Qinghai-Xizang (Tibet) Plateau as a pilot region of climatic fluctuation in China

Over 40 a observed temperature data in 172 stations in China and historical proxy data were analyzed. Evidence suggested that during 1980–1994, the warmest year appeared first in southeastern part of the Qinghai-Xizang (Tibet) Plateau (henceforth SETP) and then gradually spread northwards and eastwards to eastern China. The climatic change on century time scale in recent 600 a shows 3 relatively warm and clod stages in China. Each warm and cold stage appeared first in Tibet Plateau (henceforth TP) and then in the Qilian Mountains, then in the eastern parts of China. The warm and cold stages in TP were 10–60 a earlier than in the eastern China. The facts show that TP is a pilot region of climatic fluctuation in China on the time scale shorter than 10³a.