20#管线钢在役焊接HAZ的组织与性能研究

在役焊接过程中，管内流动介质的快速冷却，易使接头出现氢致裂纹。对20^#管线钢在不同冷却条件和不同焊接线能量下的HAZ的组织性能进行了模拟研究。结果表明，在流动水冷却下，HAZ出现较多的贝氏体、马氏体和MA组元等不平衡组织，使得HAZ的硬度高达330HvN5，性能最差。采用大的线能量焊接，形成较多的上贝氏体和粒状贝氏体组织，对改善接头性能有利。因此，在避免烧穿的前提下增大焊接线能量或减小管内介质的冷却能力，减少高硬度不平衡相的形成，可以降低HAZ氢致开裂敏感性。     

三角形速度场解析平面变形辊拔与辊挤

文章对平面变形辊拔与辊挤问题建立了运动许可的三角形速度场并获得上界解析解。该解与 Avitzur 以连续速度场得到的上界解进行比较表明,有时本文解法可得到更低的上界值。     

MIS系统通用插入组件的设计与实现

论述了数据字典是实现通用插入功能的关键，并描述了利用Grid控件实现通用插入组件的一般方法，着重讲述了依据数据字典动态生成界面，动态消息响应的处理过程，有很大的应用价值。     

EXISTENCE OF GENERALIZED WEAKLY SOLUTIONS OF DIFFERENTIAL EQUATIONS IN PRODUCT SPACES

In this paper, by using Lyapunov function and weak noncompactness conditions, we give an existence theorem of generalized weakly solutions of Cauchy problem of differential equations in product spaces.     

Monitoring the sandstorm during spring season 2002 and desertification in northern China using SSM/I data and Getis statistics

A massive sandstorm enveloped most part of northern China during the spring season 2002. Monitoring the evolution of sandstorm and desertification has become one of the most serious problems for China's environment. Since 1989, one of the most advanced and operational passive microwave sensors is the DMSP SSM/I (special sensor microwave imager) operated at seven channels (19, 37, 85 GHz with the vertical and horizontal polarization and 22 GHz with vertical polarization only). In this paper, the sandstorm and desertification indexes, SDI and DI, are derived from the radiative transfer equation, and are employed with multi-channel measurements of the DMSP SSM/I for monitoring the sandstorm and desertification in northern China. Some SSM/I data in 1997 and 2001 are employed. The algorithm of Getis statistics is developed to categorize the spatial correlation and its evolution these days. It is demonstrated that the SSM/I indexes, SDI and DI, and its Getis statistics are well applicable for monitoring the sandstorm and desertification.     

一类退化型Schrodinger方程解的连续性

该文通过一种基本的分析方法,得到了一类退化型Schrodinger方程解的连续性结果,方程的类型为:Lu+vu=(f_i)_{x_i},其中L为一退化椭圆算子,v属于某一Kato类的类比,而f_i 属于某一加权L^p空间.     

Dialdehyde starch‐crosslinked chitosan films and their antimicrobial effects

For improved mechanical and water‐swelling properties of chitosan films, a series of transparent films were prepared with dialdehyde starch as a crosslinking agent. Fourier transform infrared and X‐ray analysis results demonstrated that the formation of Schiff's base disturbed the crystallization of chitosan. The mechanical properties and water‐swelling properties of the films were significantly improved. The best values of the tensile strength and breaking elongation were 113.1 MPa and 27.0%, respectively, when the dialdehyde starch content was 5%. All the crosslinked films still retained obvious antimicrobial effects toward S. aureus and E. coli, and they showed potential for biomedical applications. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 993–997, 2003     

等温平台石墨炉原子吸收光谱法测定高纯镍中痕量杂质锑

利用石墨炉原子吸收法，在等温平台条件下直接测定高纯镍中的痕量杂质锑，对石墨炉加热程序中的干燥时间、灰化温度及原子化温度进行了优化，同时考察了介质酸度的影响。试验表明，基体镍对锑的测定有显著的影响，为此进行了标准系列基体匹配。该法的特征质量为6．6pg；相对标准偏差为6．5％；加标回收率为100％-103％。     

Crystallographic report: Bis[bis(N,N‐dibenzyldithiocarbamato)cadmium(II)]

The centrosymmetric structure of {Cd[S₂CN(CH₂Ph)₂]₂}₂ features both bridging and chelating dithiocarbamate ligands so that a square pyramidal S₅ coordination geometry results. Copyright © 2004 John Wiley & Sons, Ltd.     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.