甲醇氨化反应中交联皂石的催化行为

层柱材料是具有规则孔结构且其表面酸性及孔结构可调变的固体酸催化剂.本文合成了皂石,并用十三聚铝羟基络离子(Al_(13))与其交联,在醇氨化反应中研究了此层柱材料孔结构及表面酸性与催化性能间的关系.     

Synthesis and properties of one-dimensional Ni(Ⅱ) and Ni(Ⅱ)Cu(Ⅱ) complexes linked by hydrogen bond

Four dithiooxalato (Dto) bridged one-dimensional Ni(ll) and Ni(ll)Cu(ll) complexes (Me6[14]dieneN4)Ni2(Dto)2) (1), (Me6[14]dieneN4)CuNi(Dto)2 (2), (Me6[14]aneN4)Ni2(Dto)2 (3), and (Me6[14]aneN4)CuNi(Dto)2(4), were synthesized. These complexes have been characterized by elemental analysis, IR, UV and ESR spectra. The crystal structure of complex 3 was determined. It crystallizes in the monoclinic system, space group C2/c with a = 2.2425(4) nm, b = 1.0088(2) nm, c=1.4665(3) nm, β= 125.32(3)° ;Z=4; R = 0.076, Rw = 0.079. In the complex, Ni(1) coordinates four sulphur atoms of two Dto ligands in plane square environment. Ni(2) lies in the center of mac-rocyclic ligand. For Dto ligand, two sulphur atoms coordinate Ni(1), and O(1) coordinates Ni(2) and forms weak coordination bond. O(2) is linked to N(2) of macrocyclic ligand through hydrogen bond.     

Effect of Hyperbranched Polyester on Modification of Epoxy Resins Cured with Anhydride

Epoxy resins are widely used in coatings, adhesives and polymer composites, but the applications of cured epoxy resins are often restricted by their poor toughness. HBP can be used as toughener to improve the toughness of epoxy resins due to its high-dens…     

Synthesis and magnetic properties of μ-phenolato copper (Ⅱ) binuclear complexes with different exogenous bridges

The syntheses and magnetic properties are reported for a series of copper(Ⅱ) complexes prepared from a pentadentate binucleating ligand 2,6-diformyl-4-methylphenol di(benzoyl-hydrazone) (H3L). These complexes incorporate different exogenous ions (X-) into a bridging position to form copper(Ⅱ) binuclear complexes of the formula [Cu2(H2L)X]2+, where X-= Br-(1), Cl-(2), HO-(3), C2H5O-(4) and C3H3N2- (5). The complexes have been characterized with variable temperature magnetic susceptibility (4.2-300 K) and the observed data were fit to those from a modified Bleaney-Bowers equation by least-squares method, giving the exchange integral 2J = -6.2 cm-1 for 1, -76.4 cm-1 for 2, -241.9 cm-1 for 3, -231.1 cm-1 for 4 and -343.8 cm-1 for 5. This suggested that there is an antiferromagnetic interaction between the Cu(Ⅱ) ions and the sequence of the effect of some exogenous bridging ligands on magnetic coupling is corresponding to that in spectrochemical series.     

手性β-氨基醇的合成及其催化二乙基锌与醛的不对称加成反应

以烯烃为原料通过Sharpless不对称双羟化等多步反应合成7种手性β-氨基醇, 并将该类化合物用于催化二乙基锌和醛的不对称加成反应. 分别考察了影响对映选择性的催化剂结构、催化剂用量、溶剂、反应温度等各种因素. 当催化剂用量为5%、甲苯溶剂、在－10 ℃下、以(1S,2R)-(＋)-2-氨基-1,2-二苯基乙醇(1b)作催化剂时, 所得仲醇的对映体过量最高为85% ee, 产率高达100%.     

猴头菌寡糖的分离及其结构确定

报道了从猴头菌浸膏中分离出猴头菌二糖和三糖, 并确定了其化学结构.     

柱后衍生-荧光检测高效液相色谱法快速测定鲜牛奶中链霉素残留量

牛奶样品经磷酸溶液提取，提取液用苯磺酸阳离子交换柱和C18固相萃取柱净化，链霉素残留液用甲醇从C18固相萃取柱上洗脱，经旋转蒸发器减压蒸干，残渣用0．01mol／L庚烷磺酸钠溶液溶解，用柱后衍生-高效液相色谱荧光检测器在激发波长263nm和发射波长435nm测定．方法线性范围为0.01～0．10mg／kg；在0．01～0．10mg／kg范围，三个添加水平的回收率为78．3％～80．2％，变异系数(CV)为7．4％～12．4％，方法检出限为0．005mg／kg．     

C4/C5烃催化裂解制低碳烯烃的研究进展

从催化剂类型、裂解工艺、催化裂解的影响因素和裂解机理4个方面对国内外C4／C5烃催化裂解制低碳烯烃的研究进行了综述。催化裂解制低碳烯烃催化剂主要采用ZSM-5分子筛系列催化剂，在此基础上发展了酸改性或水热改性高硅ZSM系列分子筛及介孔MCM41分子筛。总结了国内外C4／C5烃的裂解工艺，认为影响催化裂解的主要因素是裂解原料、催化剂类型及工艺条件。目前，裂解机理主要是自由基与碳正离子机理相结合的机理。并简述了本课题组目前有关C4烷烃催化裂解的主要研究进展。     

C60-吡咯烷衍生物的合成及非线性光学性质的研究

通过富勒烯C₆₀与肌氨酸和有机醛化合物的1,3-偶极环加成反应, 获得了九种含不同有机功能基团的C₆₀吡咯烷衍生物1～9, 用¹H NMR, ¹³C NMR, FTIR, UV-vis和FAB-MS进行了结构表征; 利用皮秒激光光源, 采用z扫描技术测定了分子的三阶非线性超极化率γ⁽³⁾, 结果显示: 化合物3 (γ⁽³⁾＝4.14×10^－33 esu)具有最大的三阶非线性光学系数, 说明增加噻吩共轭链的长度, 使三阶非线性活性增加; 对具有相同共轭链的C₆₀-噻吩吡咯烷衍生物(2, 5, 1和4), 吸电子取代基减小了三阶光学非线性活性, 给电子基增大了三阶光学非线性活性; 同时发现喹啉环2-位键联(7)比4-位(8)有更好的三阶光学非线性活性.     

Preparation and Characterization of Three-dimensionally Ordered Crystalline Macroporous CeO2

Three-dimensional ordered macroporous (3DOM) materials are of great potential importance in catalysis, selective separation, sensor arrays and communications with optical band gaps1. Many results in the synthesis of 3DOM materials have been reported, such as closed-packed silica spheres or polystyrenes (PS) templating routes for silica2, metal oxides1-6 and metals7. Recently, poly(methyl methacrylate) (PMMA) colloidal crystal templates have been used to prepare 3DOM materials of metals8,…