Solvothermal Synthesis of Molybdenum Disulfide Hollow Spheres Modified by Cyanex 301 in Water–Ethanol Medium

Hollow spherical molybdenum disulfide has been successfully synthesized via a solvothermal method using Cyanex 301 as sulfur source and modification agent. The hollow spheres are characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction and Energy-Dispersive X-ray analysis. The influences of reaction conditions are also discussed while a mechanism is proposed to explain the formation of the peculiar morphology.     

17N+197Au反应中碎片与中子的符合测量

在3?3?.4MeV/u ¹⁷N束轰击¹⁹⁷Au靶产生的反应中,利用放置于不同角度组合的17个中子探测器(4°—83°)和14个半导体望远镜(2.3°—9.0°)对反应产物碎片与中子进行了符合测量.经对所得实验角分布积分得到Z=3—6元素的同位素产额分布.在参加者-旁观者模型框架下,采用¹⁷N原子核内部的不同密度分布计算了同位素产额分布并与实验数据做比较.     

正定矩阵标准型的复合矩阵的一般形式

实对称正定矩阵的复合矩阵正定性的研究已有结论,但对于一般意义下的正定矩阵的复合矩阵是否仍然是正定的研究需要利用一般的正定矩阵的标准形的复合矩阵进行讨论,给出了一般公式及具体算法,为讨论其复合矩阵的正定性提供了基础条件.     

相关系数与相关性度量

研究了度量相关性的两个主要工具:线性相关系数和尾部相关系数.线性相关系数反映了变量间的线性相关性,这对于一般的椭圆型分布是合适的.但如果随机变量具有不对称的尾部变化特征时,要用尾部相关系数描述它们之间的相关性.通过相关函数C opu la,对沪深股市的尾部相关系数进行了定量分析.结果表明:沪深股市具有较强的相关性.     

Effect of Notoginsenoside-Rg_1 on the Expression of Several Proteins in the Striatum of Rat Models with Parkinson′s Disease

Introduction Parkinson′sdisease(PD),alsocalledshaking palsy,isaneurodegenerativedisorderandfrequently occursinthepeopleabovetheageof65[1].PDisa relativelycommonneurodegenerativedisorder,which hasclinicalsymptomsincludingbradykinesia,rest tremor,rigidity,…     

Dimensional variation in production of high-aspect-ratio micro-pillars array by micro powder injection molding

Micro powder injection molding (μPIM) is one of the potential processes for the mass production of metallic microstructures and micro components. Here, μPIM is the miniaturization of conventional PIM, which involves four processing steps: mixing, injection molding, debinding and sintering. This paper looks into the feasibility and effectiveness of μPIM as a key mass production process for the fabrication of metallic micro components. For it to be an effective re-production process, it is imperative to examine how well parts can be duplicated/fabricated from a master mold. In this work, the dimensional variation of high-aspect-ratio micro-pillars arrays, in particular the dimensional shrinkage, global warpage, and surface roughness at each stage of the μPIM process for a range of molding pressures, are quantified and compared in detail. The sensitivity of the dimensional variation of the microstructures to the packing pressure is reported. The mechanism behind the dimensional variation is analyzed. PACS 81.20.Ev; 81.20.Hy; 81.70.Fy; 07.60.Ly; 81.05.-t     

Excitation Properties of the Biological Neurons with Side-Inhibition Mechanism in Small-World Networks

We have studied the excitation properties of biophysical Hodgkin-Huxley neurons with the side-inhibition mechanism in small-world networks. The result shows that the excitation properties in the networks are preferably consistent with the characteristic properties of a brain neural system under external constant stimuli, such as fatigue effect, extreme excitation principle, and the brain neural excitation response induced by different in- tensity of noise and coupling. The results of the study might shed some light on the study of the brain nerve electrophysiology and epistemological science.     

试就猝死病例谈中老年教职工保健工作

本文报告5例心性猝死(3例为冠心病性猝死),年龄为39—69岁。认为冠心病是中老年教职工猝死的主要原因,因而提出学校对他们的保健重点应放在防治冠心病上。     

Effect of Al content on the properties of Cr1−xAlxC films prepared by RF reactive magnetron sputtering

Cr_1−xAl_xC films were deposited on high-speed steel by RF reactive magnetron sputtering. In this study, we aimed to identify the effect of the Al content on the properties of Cr_1−xAl_xC films. We found that Cr_1−xAl_xC films exhibited a fine columnar grain microstructure with some special characteristics, such as high hardness of Hv 1426, a low friction coefficient of 0.29, and a large contact angle of 90° for x = 0.18. Furthermore, an increase in Al content resulted in a decrease in film hardness and an increase in contact angle. Moreover, on annealing at 923 K, the mechanical properties of the films improved and a dense protective film of complex Cr₂O₃ and Al₂O₃ oxides was formed on the surface for better wear resistance, which will ultimately increase the lifetime of the high-speed steel substrate.     

我国低温等离子体研究进展(Ⅰ)

低温等离子体物理与技术的研究在国内受到了越来越多的重视．在等离子体中发现的一些有趣的物理现象，如磁场重联、尘埃等离子体等，使人们对等离子体物理的研究掀起了新的热潮．在应用方面，几乎所有理工类实验室都有涉及低温等离子体技术的实验装置，这使得在我国低温等离子体应用方面的研究非常普及，包括微电子工业中的等离子体工艺，各种坚硬、耐腐蚀、耐摩擦材料的制备，纳米材料的制备，聚合物以及生物材料的表面改性，等等．随着低温等离子体技术的发展，低温等离子体的诊断技术也随之发展起来．文章简要地介绍了近几年来低温等离子体研究在我国的发展，介绍了一些有关低温等离子体的热点研究课题．