Removal of uranium(VI) from aqueous solutions by carboxyl-rich hydrothermal carbon spheres through low-temperature heat treatment in air

Carboxyl-rich hydrothermal carbon spheres were prepared by simply heating pristine hydrothermal carbon spheres (HCSs) at lower temperature in air, and the textural properties were characterized using Boehm titrations, scanning electron microscopy, Fourier transform infrared spectrometer (FT-IR) and elemental-analysis. The result of Boehm titrations indicated that the content of carboxyl groups on HCSs increased significantly from 0.53 to 3.81 mmol/g after heat-treatment at 300 °C, which was also confirmed by FT-IR and EA qualitatively. The ability of heat-treated HCSs has been explored for the removal and recovery of uranium from aqueous solutions, and the influences of different experimental parameters, such as heat-treatment temperature, contact time and ionic strength, on adsorption were investigated. The U(VI) sorption capacity of HCSs increased from 55.0 to 179.95 mg/g after heat-treatment at 300 °C for 5 h. Selective adsorption studies showed that the heat-treated HCSs could selectively remove U(VI), and the selectivity coefficients were improved after heat-treatment in the presence of co-existing ions, Na(I), Ni(II), Sr(II), Mn(II), Mg(II) and Zn(II). The adsorbent HCSs could be effectively regenerated by 0.05 mol/L HCl solution for the removal and recovery of U(VI). Complete removal (99.0 %) of U(VI) from 1.0 L industry wastewater containing 15.0 mg U(VI) ions was possible with 5.0 g heat-treated HCSs. In addition, a reaction mechanism for newly generating carboxyl groups on pristine HCSs surface during heat-treatment process and uranyl ion interaction with carboxyl-rich hydrothermal carbon spheres were also supposed.     

核磁共振任意波形发生器的研制

任意波形发生器（又叫函数发生器）作为一种通用的信号源,在物理、电子、计算机等领域有着广泛的应用. 本文提出了一种不依赖PC机总线的、完全独立的、 可用于低场磁共振成像的多用途任意波形发生器（Arbitrary Waveform Generator, AWG）设计方案,围绕着这种方案,研制了80 MHz通用磁共振任意波形发生器. 并提供了实际测试数据和成像实验结果,对研制情况和实验结果进行了总结和讨论.     

B元素对正极材料LiCoO2结构及性能的影响

为得到性能优异的锂离子电池正极材料,通过湿化学方法首先制得LiCoO2前驱体,掺入一定量H3BO3后经加热处理即得到掺B样品.通过对掺B样品进行检测分析,结果表明B的掺入能够部分改变LiCoO2的结构;其中当B含量在0.5%～3.5%时效果最好,其循环性也有提高.     

马钢新2#2 500m3高炉出铁场设计

马钢新2# 2 500 m3大高炉出铁场设计采用了双矩形出铁场的纵向布置形式.共设3个铁口,无渣口.每个出铁场下均设2条混铁车停放线,采用320 t鱼雷型混铁车受运铁水.在介绍马钢新2#大高炉出铁场设计的同时,详细论述了针对同类型高炉出铁场设计存在的某些问题所采取的技术措施.     

二硫化锡纳米片阻变存储器的制备与性能

采用水热法合成了尺寸为50~100 nm的二硫化锡纳米片,并首次以二硫化锡作为阻变层材料的阻变存储器（Cu/PMMA/SnS₂/Ag,PMMA=聚甲基丙烯酸甲酯）,对其阻变性能进行了研究。结果表明： Cu/PMMA/SnS₂/Ag阻变存储器的开关比约10⁵,耐受性2.7×10³。在上述2项性能指标达到较优水平的同时,开态与关态电压分别仅约为0.28与-0.19 V。     

钴卟啉过氧中间体向环己烷夺氢的密度泛函计算

采用密度泛函理论计算方法模拟了简单钴卟啉过氧中间体PCo-O2与环己烷C6H12的作用,分析了反应路径中各驻点能量和反应过渡态分子构型。研究结果表明,PCo-O2向底物环己烷夺氢的反应可以延正方向进行,二线态PCo-O2更具反应活性,反应过程中Co-O键得到加强,O-O键被削弱。依据理论计算结果,探讨了四苯基钴卟啉催化环己烷氧化生成环己醇和环己酮的反应机理,指出反应延Lyons高价金属氧代物机理生成环己醇,而反应循环中产生的烷基自由基可以延烷基过氧化过渡金属配合物反应机理进行生成环己酮。     

甲基绿褪色光度法测定琥乙红霉素

在pH 7.8的磷酸盐缓冲溶液中,琥乙红霉素和甲基绿在50℃下可以反应形成稳定的离子缔合物。冷却至室温后以水做参比测定体系的吸收光谱,发现琥乙红霉素溶液在550~670 nm几乎无吸收,甲基绿在此区域有强烈的吸收,甲基绿与琥乙红霉素生成的离子缔合物的吸光度与甲基绿相比有明显降低,最大褪色波长在634 nm附近,且吸光度变化ΔA与琥乙红霉素的浓度成正比。琥乙红霉素的质量浓度在0.0009~0.1530 mg/mL范围内服从Beer定律,线性回归方程为:A=-3.037ρ+0.0355,r=0.9995;对10.00 mL 5.0×10-3mg/mL琥乙红霉素测定6次,RSD=0.6%,在634 nm测得ε=6.19×104L·mol-1·cm-1。研究了琥乙红霉素-甲基绿反应体系的光谱特性、反应的影响因素、共存物质的影响,做了反应的条件优化实验,对所建立的方法进行了一些初步的分析应用。在实验基础上,建立了测定琥乙红霉素的褪色分光光度法,检出限为0.21μg/mL,可用于琥乙红霉素片中琥乙红霉素含量的测定。     

微流控技术筛选酶抑制剂的研究进展

随着近年新合成或提取的化合物大量涌现,药物筛选朝着快速、高效、高通量方向发展。微流控分析技术具有的分析微型化、高通量化、可集成化和良好的生物相容性等特点,为药物的筛选提供了新的方法和技术平台。本文简要介绍了酶抑制剂筛选,重点评述基于微流控技术筛选酶抑制剂的研究进展。     

Self-assembly behavior of copolymers with super segregated structure containing fluorinated segments

Copolymers with super segregated structure of hydrophilic methoxy poly（ethylene glycol） （mPEG） and fluorophilic poly（1H,1H,2H,2H-perfluorodecyl acrylate） （PFA） were prepared. And just because of this super segregated structure which was resulted from the extremely strong incompatibility between the two blocks, several interesting self- assembly behaviors of the copolymers were displayed and studied under different conditions. Transmission electron microscope （TEM） showed that with the increase of PFA in the polymerization system, the incompatibility in this super segregated structure became stronger, and the self-assembly behavior changed from ball-like or rod-like to vesicles, and finally collapsed to sheet-like. The self-assembly behavior changed likewise when the initial concentration increased. And the interesting formation of these barrel-like and spindle-like vesicles was finally studied with different cooling speeds. It＇s finally found that with this super segregation structure, these new self-assembly morphology might be formed due to the extremely strong incompatibility between mPEG and PFA segments.     

车用发动机磁流变悬置的刚度优化

由于传统的悬置优化设计一般不考虑发动机载荷以及系统阻尼,不能反映磁流变悬置的半自动控制特性。因此,选取具有代表性的车用直列式4缸4冲程发动机悬置系统的振动力学模型,利用遗传优化算法建立一种磁流变液阻尼器初始刚度优化的新方法。该方法使磁流变液悬置在发动机多种转速下有更优秀的传递率,在冲击载荷下满足安全要求的发动机振动烈度。