Mechanical Design and Research on Process of Air Suction Drawing System of Spunbonded Nonwoven

The design guideline for the air suction drawing system with auxiliary air was analyzed, a spunbonding nonwoven system named PADHL1 - 3200 was designed and polypropylene （PP） spunbonded nonwoven fabrics with excellent properties were achieved after many trial runs. On the other hand, the suction air velocity （VA） was calculated and the influence of VA on the bonding strengh of PP nonwoven fabrics was Studied as well. It was found that VA is 1.5 - 2.5 times of the spinning velocity. With the increase of VA, PP fibers become finer and the bonding strength of PP nonwoven fabrics increases as well.     

一类积分不等式的推广

对一些基本的积分不等式进行了推广，给出了含有n个无关变元的更广泛的非线性积分不等式．利用所得的不等式讨论了某些非线性积分方程解的有界性．     

曲轴箱窜气量检测仪的研制

介绍了车用压差式气体流量传感器的结构设计和电测电路，指出了传感器的使用范围，由实验测出了特性曲线．该仪器可检测车用发动机曲轴箱窜气量，适用于发动机不解体故障诊断．     

Synthesis of 2-substituted indoles by palladium-catalyzed heteroannulation with Pd-NaY zeolite catalysts

Various 2-substituted indoles were prepared by heteroannulation of o-iodoanilines and terminal alkynes in a one-pot reaction with a Pd(II)-NaY zeolite catalyst. The product formation largely depended on the solvent, base, and reaction temperature. The recycled catalyst showed good reusability in the heteroannulation reaction.     

双面加热环形通道内干涸点的确定

根据环形管通道内流体流动和换热的特点,以Kirillov和Smogalev提出的干涸点理论模型假设为基础,从最基本的质量守恒方程出发,并引入临界液膜厚度等相应的辅助模型,得到了双面加热环形通道内流动沸腾干涸点的理论模型。同时针对间隙为1.0mm和1.5mm的环形窄缝进行了低压低质量流速工况下干涸点的实验研究。比较发现理论模型预测值与实验结果基本相符。说明本文提出的理论模型适用于低压低流量条件下的窄环形通道。实验同时发现:环状流临界热流密度在系统压力为2.2MPa达到最大值,临界含汽量随质量流速的增大呈缓慢下降趋势。     

Hamiltonian N2‐locally connected claw‐free graphs

A graph G is N₂‐locally connected if for every vertex ν in G, the edges not incident with ν but having at least one end adjacent to ν in G induce a connected graph. In 1990, Ryjá?ek conjectured that every 3‐connected N₂‐locally connected claw‐free graph is Hamiltonian. This conjecture is proved in this note. © 2004 Wiley Periodicals, Inc. J Graph Theory 48: 142–146, 2005     

“神龙一号”注入器研制

“神龙一号”注入器是直线感应加速器的束流源，它采用了感应叠加的高压加载方式，包括脉冲功率系统、感应腔、阴阳极杆、绝缘支撑、二极管和束流传输系统等子系统. 在研制中采用了径向绝缘支撑、对中支撑调节系统、类Pierce阴极等先进技术，以及二极管线圈内置和外径为800mm的铁氧体大环等创新. 参数测试显示，3.5MeV注入器达到了世界先进水平.