SPME-GC-MS快速分析炼油厂废水中痕量VOCs

采用固相微萃取-气相色谱-质谱联用(SPME-GC-MS)对炼油厂废水中痕量挥发性有机化合物(VOCs)进行了定性分析,简化了预处理过程,总分析时间为1h左右.对比处理前后的废水样品的MS定性结果,为废水处理工艺的评价以及有机物降解机理提供了依据.     

改善20CrMnTiH淬透性的研究

莱钢特钢厂20CrMnTiH钢材成分波动较大,淬透性带HRC8～10,范围较大,制约了齿轮钢质量的进一步提高.通过研究,发现铸坯中心偏析尤其是碳偏析为主要问题.通过工艺优化采取各项措施,尤其增加电磁搅拌后,中心碳偏析得到明显改善;C控制在0.19%～0.20%的炉次达到了95.6%;淬透性带控制在HRC6内的达到了92.1%;在HRC4内的达到了86.2%;提高了产品质量,满足了用户需求.     

对教考分离工作的思考

教考分离工作是高校考试工作改革的必然趋势。本文从实施教考分离的模式入手,阐述了教考分离模式、完善教考分离的措施、实效及教考分离存在的问题,对当前教考分离工作的实施具有一定的借鉴作用。     

Differential pulse anodic stripping voltammetric determination of traces of copper with a tobramycin-Nafion modified electrode.

A Nafion-modified glassy carbon electrode incorporated with tobramycin for the voltammetric stripping determination of Cu2+ has been explored. The electrode was fabricated by tobramycin containing Nafion on the glassy carbon electrode surface. The modified electrode exhibited a significantly increased sensitivity and selectivity for Cu2+ compared with a bare glassy carbon electrode and the Nafion modified electrode. Cu2+ was accumulated in HAc-NaAc buffer (pH 4.6) at a potential of -0.6 V (vs. SCE) for 300 s and then determined by differential pulse anodic stripping voltammetry. The effects of various parameters, such as the mass of Nafion, the concentration of tobramycin, the pH of the medium, the accumulation potential, the accumulation time and the scan rate, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 1.0 x 10(-9) to 5.0 x 10(-7) mol l(-1) with a correlation coefficient of 0.9971. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-8) and 2.0 x 10(-7) mol l(-1) Cu2+, respectively. The detection limit (three times signal to noise) was 5.0 x 10(-10) mol l(-1). A study of interfering substances was also performed, and the method was applied to the direct determination of copper in water samples, and also in analytical reagent-grade salts with satisfactory results.     

BEPCⅡ LINAC束流光学匹配及轨道校正计算研究

 北京正负电子对撞机直线注入器(BEPCⅡ LINAC)的升级改进要求建立束流光学匹配计算和轨道校正系统，为此对束流光学匹配计算和轨道校正计算的方法进行了研究，并采用VC++语言编写了相应的程序，利用最小二乘法原理进行了束流光学匹配计算，模拟了束流轨道校正，取得了较为理想的结果。     

The Squeezing Effect in a Mesoscopic RLC Circuit

Using the path integral method we derive quantum wave function and quantum fluctuations of charge andcurrent in the mesoscopic RLC circuit. We find that the quantum fluctuation of charge decreases with time, oppositely,the quantum fluctuation of current increases with time monotonously. Therefore there is a squeezing effect in the circuit.If some more charge devices are used in the mesoscopic-damped circuit, the quantum noise can be reduced. We also findthat uncertainty relation of charge and current periodically varies with the period π/2 in the under-damped case.     

A New Simple Ultrahigh Speed Decoding Algorithm for BCH Code

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｍｏｄｅｒｎｄｉｇｉｔａｌｃｏｍｍｕｎｉｃａｔｉｏｎｓｙｓｔｅｍｓｏｆｔｅｎｒｅｑｕｉｒｅｅｒｒｏｒ ｆｒｅｅｔｒａｎｓｍｉｓｓｉｏｎ .Ｅｒｒｏｒｃｏｎｔｒｏｌｃｏｄｉｎｇｔｅｃｈｎｏｌｏｇｙｈａｓｂｅｅｎｕｓｅｄｗｉｄｅｌｙｉｎｃｏｍｍｕｎｉｃａｔｉｏｎｓｙｓｔｅｍ .Ａｎｄｉｔｈａｓｂｅｅｎｉｍｐｒｏｖｉｎｇｔｈｅｐｅｒｆｏｒｍａｎｃｅｏｆｃｏｍｍｕｎｉｃａｔｉｏｎｓｙｓｔｅｍ ｇｒｅａｔｌｙ ,ｅｓｐｅｃｉａｌｌｙｉｎｗｉｒｅｌｅｓｓｃｏｍｍｕｎｉｃａｔｉｏｎｓｓ…     

巧选样本空间解决古典概型问题

对于古典概型问题,一般通过排列组合方法计算,但有的时候计算过于复杂。本文通过几个例题来说明选取合适的样本空间可以简便的解决问题,同时还对这两种方法作比较。     

涡旋柔性弹簧及组件性能实验研究

本文利用TSL系列弹簧刚度实验仪对用于斯特林制冷机中的单片柔性弹簧及柔性弹簧组件进行了实验研究。测试了四种不同尺寸弹簧刚度的动态特性,研究了单片弹簧的轴向刚度、径向刚度以及力矩特性,然后对柔性弹簧组件进行了实验研究,指出了不同组合方法下的刚度及弯矩特性,得到的数据可以作为斯特林制冷机设计的参考。