不同形貌氮化硅纳米结构的制备与表征

分别通过VLS和VS生长机制得到了Si3N4纳米线和纳米带.产物经X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等表征手段进行了分析.FTIR图谱表明它们在800～1100cm-1的波数范围内有一个宽的吸收带,这是Si-N键伸缩振动模式的典型吸收带.它们的室温光致发光图谱显示,在420nm左右都有一很强的发射带,表明其将在纳米光电器件中有潜在应用.另外,Si3N4纳米线发光峰与纳米带的发光相比有少许蓝移(蓝移约4nm),这可能和晶须尺寸的少许差别有关.至于纳米带的发光强度大于纳米线的原因,可能是纳米带的比表面积相对较大,有利于悬键的形成,从而导致材料结构内缺陷的浓度较大.     

Fe3+对KDP晶体光学质量的影响

金属离子Fe3+对KDP晶体的生长和光学性质有明显影响.本文在前期研究的基础上[1]系统考察了该杂质离子对KDP晶体光学质量的影响.实验结果表明,三价金属离子Fe3+会降低KDP晶体的透光率,同时对晶体均匀性和光损伤阈值也有明显影响.光损伤阈值降低的主要原因在于杂质诱发缺陷导致的电子崩电离、多光子电离(尤其是双光子电离)等过程的发生.     

缓冲层ZnPc对有机电致发光器件特性的影响

本文研究了酞菁锌(ZnPc)薄膜的表面形貌及ZnPc薄膜作为缓冲层对有机电致发光器件(OLEDs)光电特性的影响.对比两组样品的AFM图像,ZnPc薄膜相比于ITO薄膜,其表面的岛面积较大,薄膜表面更连续平整,基本上覆盖了ITO膜表面针孔,减少了表面的缺陷.另外,ZnPc薄膜的岛分布均匀有序.使用ZnPc作为缓冲层的器件性能明显好于未使用ZnPc修饰的器件,在7.42V的驱动电压下的最大发光亮度达到1.428kcd/m2,在4.3V电压驱动下时,最大光功率效率为1.411m/W;而未使用缓冲层的器件在8V的驱动电压下达到最大发光亮度达到1.212kcd/m2,在5.5V电压驱动下时,最大光功率效率为0.931m/W.     

局部凸Hausdorff空间中的Drop定理和Drop性质

证明了局部凸H ausdorff空间中的一个D rop定理,提出了局部凸H ausdorff空间中的-τdrop性质、拟-τdrop性质和局部D rop性质.并证明τ-序列紧凸集具有-τdrop性质,τ-可数紧凸集具有拟-τdrop性质以及局部序列紧凸集都具有局部D rop性质.     

一种基于H.264的自适应快速模式选择算法

提出了一种基于H.264的快速模式选择算法.该算法首先进行Skip模式的判断.如果Skip模式不适合当前宏块,则继续利用宏块的空间同质性和时间静态性进行其他帧间模式的筛选.然后根据帧间模式选择的结果判断是否继续进行帧内预测.算法设计过程中,充分考虑Quan-tize Parameter对模式选择的影响,从而可以适用于不同码率的环境.实验证明,该算法在高低码率下都能在保证图像质量的同时大幅度提升编码速度.     

车身装配概念设计专家系统

介绍了车身装配偏差分析(AVA)系统中车身装配设计专家系统的构造与分析流程以及装配知识的获取与表达,通过基于知识的装配顺序获取与尺寸链的生成、接头方案配置与公差设计来完成基于知识的车身装配工艺设计.构建了一个由概念设计到详细设计基于知识的数字化车身设计平台,使得产品的整个装配设计过程集成到一个统一的设计环境中,在一定程度上达到概念设计与制造的并行协调设计.     

Rapid Identification for the Pterocarpus Bracelet by Three-Step Infrared Spectrum Method

In order to explore a rapid identification method for the anti-counterfeit of commercial high value collections, a three-step infrared spectrum method was used for the pterocarpus collection identification to confirm whether a commercial pterocarpus bracelet (PB) was made from the precious species of Pterocarpus santalinus (P. santalinus). In the first step, undertaken by Fourier transform infrared spectroscopy (FTIR) spectrum, the absorption peaks intensity of PB was slightly higher than that of P. santalinus only at 1594 cm⁻¹, 1205 cm⁻¹, 1155 cm⁻¹ and 836 cm⁻¹. In the next step of second derivative IR spectra (SDIR), the FTIR features of the tested samples were further amplified, and the peaks at 1600 cm⁻¹, 1171 cm⁻¹ and 1152 cm⁻¹ become clearly defined in PB. Finally, by means of two-dimensional correlation infrared (2DIR) spectrum, it revealed that the response of holocellulose to thermal perturbation was stronger in P. santalinus than that in PB mainly at 977 cm⁻¹, 1008 cm⁻¹, 1100 cm⁻¹, 1057 cm⁻¹, 1190 cm⁻¹ and 1214 cm⁻¹, while the aromatic functional groups of PB were much more sensitive to the thermal perturbation than those of P. santalinus mainly at 1456 cm⁻¹, 1467 cm⁻¹, 1518 cm⁻¹, 1558 cm⁻¹, 1576 cm⁻¹ and 1605 cm⁻¹. In addition, fluorescence microscopy was used to verify the effectiveness of the above method for wood identification and the results showed good consistency. This study demonstrated that the three-step IR method could provide a rapid and effective way for the anti-counterfeit of pterocarpus collections.     

Phenothiazine-based covalent organic frameworks with low exciton binding energies for photocatalysis

Designing delocalized excitons with low binding energy (E_b) in organic semiconductors is urgently required for efficient photochemistry because the excitons in most organic materials are localized with a high E_b of >300 meV. In this work, we report the achievement of a low E_b of ∼50 meV by constructing phenothiazine-based covalent organic frameworks (COFs) with inherent crystallinity, porosity, chemical robustness, and feasibility of bandgap engineering. The low E_b facilitates effective exciton dissociation and thus promotes photocatalysis by using these COFs. As a demonstration, we subject these COFs to photocatalytic polymerization to synthesize polymers with remarkably high molecular weight without any requirement of the metal catalyst. Our results can facilitate the rational design of porous materials with low E_b for efficient photocatalysis.

We report the construction of phenothiazine-based covalent organic frameworks, which exhibited diverse structures, the feasibility of bandgap engineering, and unprecedented ultralow exciton binding energy of ∼50 meV for photocatalytic polymerization.     

Activation of Stimulation of Interferon Genes (STING) Signal and Cancer Immunotherapy

Stimulator of interferon gene (STING), an intracellular receptor in the endoplasmic reticulum, could induce the production of cytokines such as type I interferon (IFN) by activating the cGAS-STING signal pathway. In recent years, activation of STING has shown great potential to enhance anti-tumor immunity and reshape the tumor microenvironment, which is expected to be used in tumor immunotherapy. A number of STING agonists have demonstrated promising biological activity and showed excellent synergistic anti-tumor effects in combination with other cancer therapies in preclinical studies and some clinical trials. The combination of STING agonists and ICI also showed a potent effect in improving anti-tumor immunity. In this review, we introduce the cGAS-STING signaling pathway and its effect in tumor immunity and discuss the recent strategies of activation of the STING signaling pathway and its research progress in tumor immunotherapy.     

NCO自由基与O和N反应的理论研究

采用密度泛函和量子化学从头算方法, 对NCO自由基和O, N原子反应的势能面进行了理论研究, 讨论了主要的反应通道. 这两种自由基反应的机理比较类似, 初始都有两种进攻方式. NCO与O的主反应通道是O原子从N端无势垒加合, 经过一低垒过渡态, 得到稳定产物P1(CO+NO), 而对NCO与N反应得到了一完整反应通道和无垒加合产物.