Liquid chromatography in the analysis of neurotransmitters and alkaloids

Several thin-layer chromatographic (TLC) and high-performance liquid chromatographic (HPLC) systems for the determination of biogenic amine neurotransmitters, alkaloids, and the metabolites of these two groups of compounds are developed. The possibility of the interference of these compounds is investigated. In all the systems developed for neurotransmitters, the retention of alkaloids is examined and vice versa. In TLC because of different visualization procedures (a dyeing reagent for alkaloids and visible light for neurotransmitters), compounds of both the groups may be determined simultaneously without the risk of interference. In HPLC, similarly, the possibility of false diagnosis through simultaneously employing the fluorimetric and diode-array detectors can be excluded.     

Phytochromes with noncovalently bound chromophores: the ability of apophytochromes to direct tetrapyrrole photoisomerization

Chromophore-apoprotein interactions were studied with recombinant apoproteins, oat phytochrome (phyA) and CphB of the cyanobacterium Calothrix PCC7601, which were both incubated with the bilin compounds biliverdin (BV) IXalpha, phycocyanobilin (PCB) and the 3'-methoxy derivative of PCB. Previously it was shown that CphB and its homolog in Calothrix, CphA, show strong sequence similarities with each other and with the phytochromes of higher and lower plants, despite the fact that CphB carries a leucine instead of a cysteine at the chromophore attachment position and thus holds the chromophore only noncovalently. CphA binds tetrapyrrole chromophores in a covalent, phytochrome-like manner. For both eyanobacterial phytochromes, red and far-red light-induced photochemistry has been reported. Thus, the role of the binding site of CphB in directing the photochemistry of noncovalently bound tetrapyrroles was analyzed in comparison with the apoprotein from phyA phytochrome. Both the aforementioned compounds, which were used as chromophores, are not able to form covalent bonds with a phytochrome-type apoprotein because of their chemical structure (vinyl group at position 3 or methoxy group at position 3'). The BV adducts of both apoproteins showed phytochrome-like photochemistry (formation of red and far-red-absorbing forms of phytochrome [P(r) and P(fr) forms]). However, incubation of the oat apophytochrome with BV primarily yields a 700 nm form from which the P(r)-P(fr) photochemistry can be initiated and to which the system relaxes in the dark after illumination. The results for CphB were compared with a CphB mutant where the chromophore-binding cysteine had been introduced, which, upon incubation with PCB, shows spectral properties nearly identical with its (covalently binding) CphA homolog. A comparison of the spectral properties (P(r) and P(fr) forms) of all the PCB- and BV-containing chromoproteins reveals that the binding site of the cyanobacterial apoprotein is better suited than the plant (oat) phytochrome to noncovalently incorporate the chromophore and to regulate its photochemistry. Our findings support the proposal that the recently identified phytochrome-like prokaryotic photoreceptors, which do not contain a covalently bound chromophore, may trigger a light-induced physiological response.     

Transition metal-mediated intramolecular [2+2+2] cycloisomerizations of cyclic triynes and enediynes

[reaction: see text] Nitrogen-containing 15-membered triacetylenic macrocycles known as 1,6,11-tris(arylsulfonyl)-1,6,11-triazacyclopentadeca-3,8,13-triynes (1) and enediynic macrocycles called 1,6,11-tris(arylsulfonyl)-1,6,11-triazacyclopentadeca-3-ene-8,13-diynes (4 and 5) were satisfactorily prepared. [2+2+2] cycloisomerization processes catalyzed by transition metals were tested in the above-mentioned macrocycles. Readily available and familiar cyclotrimerization precatalysts were examined for efficiency. Among them, the RhCl(CO)(PPh(3))(2) complex was found to catalyze the cycloisomerization reaction giving the desired cycloadducts in high yields.     

Surface-functionalized latex particles as controlling agents for the mineralization of zinc oxide in aqueous medium

Polystyrene latex particles modified at the surface with different hydrophilic functional groups were prepared by miniemulsion polymerization and used as controlling agents in the crystallization of zinc oxide from aqueous medium. The effects of the chemical nature of the surface functionalization and the latex concentration on the crystal growth, morphology, and crystalline structure of the resulting zinc oxide were analyzed. Micro- and submicrosized crystals with a broad variety of morphologies depending on the functionalization were obtained. Among the different latexes studied, the acrylic-acid-derived particles were shown to be a convenient system for further quantitative investigations. In this case, as the additive concentration increases, the length-to-width ratio (aspect ratio) of the crystals decreases systematically. Preferential adsorption of the latex particles onto the fast-growing faces {001} of ZnO is assumed to follow a Langmuir-type isotherm, and interaction of the adsorbed particles with the growth centers will reduce the growth rate in [001]. This leads to a quantitative relationship linking the aspect ratio to the latex concentration at constant diameter and surface chemistry of the latex. The dependence of the aspect ratio on charge density of the latex can also be modeled by an algorithm in which attractive forces between the latex particle and the ZnO surface are balanced against repulsive forces of an osmotic nature. The latter are associated with the confined volume between the crystal and latex particle surfaces.     

Interaction and lipid-induced conformation of two cecropin-melittin hybrid peptides depend on peptide and membrane composition

The interaction of two hybrid peptides of cecropin A and melittin [CA(1-8)M(1-18) and CA(1-7)M(2-9)] with liposomes was studied by differential scanning calorimetry (DSC), circular dichroism (CD), and quasi-elastic light scattering (QELS). The study was carried out with large unilamellar vesicles (LUVs) of three different lipid compositions: 1,2-dimyristoil-sn-glycero-3-phosphocholine (DMPC), 1,2-dimyristoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DMPG) and a binary mixture of DMPC/DMPG, in a wide range of peptide-to-lipid (P:L) molar ratios (0 to 1:7). DSC results indicate that, for both peptides, the interaction depends on membrane composition, with very different behavior for zwitterionic and anionic membranes. CD data show that, although the two peptides have different secondary structures in buffer (random coil for CA(1-7)M(2-9) and predominantly beta-sheet for CA(1-8)M(1-18)), they both adopt an alpha-helical structure in the presence of the membranes. Overall, results are compatible with a model involving a strong electrostatic surface interaction between the peptides and the negatively charged liposomes, which gives place to aggregation in the gel phase and precipitation after a threshold peptide concentration. In the case of zwitterionic membranes, a progressive surface coverage with peptide molecules destabilizes the membrane, eventually leading to membrane disruption. Moreover, delicate modulations in behavior were observed depending on the peptide.     

Cleavage of the peptide bond of beta-alanyl-L-histidine (carnosine) induced by a Co(III)-amine complexes: reaction, structure and mechanism

Cleavage of the peptide bond occurs when beta]-alanyl-L-histidine (carnosine) reacts with [Co(tren)Cl2]+ (tren = tris(2-aminoethyl)amine) to give [Co(tren)(histidine)](2+) 1 and [Co(tren)(beta-alanine)](2+) 2. [Co(tren)(histidine)](2+) 1 crystallizes in the enantiomorphic space group P2(1)2(1)2(1) and 2 crystallizes in the P2(1)/c space group. The mechanism of the cleavage reactions were studied in detail for the precursor [Co(tren)Cl2]+ and [Co(trien)Cl2]+, which convert into [Co(tren)(OH)2]+/[Co(tren)(OH)(OH2)]2+ and [Co(trien)(OH)2]+/[Co(trien)(OH)(OH2)]2+ in water at basic pH (trien = 1,4,7,10-tetraazadecane). At a slightly basic pH, the initial coordination of the substrate (beta-alanyl-L-histidine) is by the carboxylate group for the reaction with [Co(tren)Cl2]+. This is followed by a rate-limiting nucleophilic attack of the hydroxide group at the beta-alanyl-L-histidine carbonyl group. In a strongly basic reaction medium substrate, binding of the metal was through carboxylate and amine terminals. On the other hand, for the reaction between [cis-beta-Co(trien)Cl2]+ and beta-alanyl-L-histidine, the initial coordination of the substrate takes place via an imidazole ring nitrogen, independently, and followed by a nucleophilic attack of the hydroxide group at the beta-alanyl-L-histidine carbonyl group. The circular dichroism spectrum for 1 suggests that a very small extent of racemization of the amino acid (L-histidine) takes place during the cleavage reaction between [Co(tren)Cl2]+ and beta-alanyl-L-histidine. Reaction between [cis-beta-Co(trien)Cl2]+ and beta-alanyl-L-histidine also causes cleavage of the peptide bond, producing a free beta-alanyl molecule and a cationic fragment [cis-alpha-Co(trien)(histidine)](2+) 3 that crystallizes in the optically active space group P2(1)2(1)2(1). Unlike the previous case an appreciable degree of racemization of the L-histidine takes place during the reaction between [cis-beta-Co(trien)Cl2]+ and beta-alanyl-L-histidine. Crystals containing L-histidine and D-histidine fragments in the [cis-alpha-Co(trien)(histidine)]2+ moiety were crystallographically documented by mounting a number of randomly selected crystals.     

Nanostructured collagen layers obtained by adsorption and drying

The supramolecular organization of collagen adsorbed from a 7 microg/ml solution on polystyrene was investigated as a function of the adsorption duration (from 1 min to 24 h) and of the drying conditions (fast drying under a nitrogen flow, slow drying in a water-saturated atmosphere). The morphology of the created surfaces was examined by atomic force microscopy (AFM), while complementary information regarding the adsorbed amount and the organization of the adsorbed layers was obtained using radioassays, X-ray photoelectron spectroscopy (XPS), and wetting measurements. The collagen adsorbed amount increased up to an adsorption duration of 5 h and then leveled off at a value of 0.9 microg/cm2. For samples obtained by fast drying, modeling of the N/C ratios obtained by XPS in terms of thickness and surface coverage, in combination with the adsorbed amount, water contact angle measurements and AFM images, indicated that the adsorbed layer formed a felt starting from 30 min of adsorption, the density and/or the thickness of which increased with the adsorption time. Upon slow drying, the collagen layers formed after adsorption times up to about 2 h underwent a strong reorganization. The obtained nanopatterns were attributed to dewetting, the liquid film being ruptured and adsorbed collagen being displaced by the water meniscus. At higher adsorption times, the organization of the collagen layer was similar to that obtained after fast drying, because the onset of dewetting and/or collagen displacement were prevented by the high density of the collagen felt.     

Contribution to the mechanism of liquid membrane oscillators involving cationic surfactant

It is shown that liquid membrane oscillators with cationic surfactants have more complex oscillation patterns than observed previously. The actual details of the oscillations depend strongly on the nature of the membrane material, disclosing even the presence of parallel molecular events. It appears that sampling topology also has a great influence on the observed oscillatory behavior. Variation of oscillation patterns with diffusion path length in the membrane demonstrated the decisive role played by the actual timing of molecular events. The new evidences produced complete usefully the actual views concerning the mechanism of oscillations.     

Rapid determination of minority organic acids in honey by high-performance liquid chromatography

A rapid high-performance liquid chromatographic method for the determination of organic acids in honey is reported. Malic, maleic, citric, succinic and fumaric acids were identified and quantified in 15 min. First time repeatibility, reproducibility and recoveries were determined out for these acids in honey samples. Maleic acid was also quantified for first time by a chromatographic method. The organic acids were removed from honey by using a solid-phase extraction procedure with anion-exchange cartridges. Previously, the solution of honey was adjusted to pH 10.50 with 0.1 M NaOH and stirred for 15 min at room temperature. Then, this solution was adjusted to pH 5.00 with 0.1 M H2SO4. This procedure was carried out to avoid interferences in the baseline. The chromatographic separation was achieved with only one Spherisorb ODS-2 S5 column thermostated at 25 degrees C. Metaphosphoric acid (pH 2.20) was used as mobile phase at a flow-rate of 0.7 ml/min. Organic acids were detected with a UV-vis detector (215 nm). The precision results showed that the relative standard deviations of the repeatability and reproducibility were < or =3.20% and < or =4.86%, respectively. The recoveries of the organic acids ranged from 62.9 to 99.4%. Under optimum conditions the detection limits ranged from 0.0064 to 7.57 mg/kg and the quantification limits ranged from 0.025 to 10.93 mg/kg.     

An iterative type I polyketide synthase PKSN catalyzes synthesis of the decaketide alternapyrone with regio-specific octa-methylation

A biosynthetic gene cluster containing five genes, alt1-5, was cloned from Alternaria solani, a causal fungus of early blight disease to tomato and potato. Homology searching indicated that the alt1, 2, and 3 genes code for cytochrome P450s and the alt4 gene for a FAD-dependent oxygenase/oxidase. The alt5 gene encodes a polyketide synthase (PKS), named PKSN, that was found to be an iterative type I complex reduced-type PKS with a C-methyltransferase domain. To identify the PKSN function, the alt5 gene was introduced into the fungal host Aspergillus oryzae under an alpha-amylase promoter. The transformant produced a polyketide compound, named alternapyrone, whose structure is shown to be 3,5-dimethyl-4-hydroxy-6-(1,3,5,7,11,13-hexamethyl-3,5,11-pentadecatrienyl)-pyran-2-one. Labeling experiments confirmed that alternapyrone is a decaketide with octa-methylation from methionine on every C(2) unit except the third unit.