Amperometric Determination of Cr(III) and Cr(VI) by Flow Injection Analysis

Speciation of Cr(III) and Cr(VI) can be attained by flow injection analysis with amperometric detection. Cr(VI) is reduced in an acidic medium to Cr(III) with a glassy carbon electrode at —0.1 V vs. Ag/AgCl and the current is recorded. Cr(III) is oxidised on-line to Cr(VI) with alkaline hydrogen peroxide solution. From the difference of the total chromium and Cr(VI), the amount of Cr(III) was obtained. A linear calibration curve for Cr(VI) was obtained for the concentration ranges 0.01-5.0ppm of Cr(VI) and we have calculated the limit of determination to be about 0.5ppb. We have studied the degree of reproducibility obtained using the solid electrodes under various conditions. The influence of flow rate, coil length, interfenences and the extent of reaction were studied.     

The indenter tip radius effect in micro- and nanoindentation hardness experiments.

Nix and Gao established an important relation between the microindentation hardness and indentation depth. Such a relation has been verified by many microindentation experiments (indentation depths in the micrometer range), but it does not always hold in nanoindentation experiments (indentation depths approaching the nanometer range). Indenter tip radius effect has been proposed by Qu et al. and others as possibly the main factor that causes the deviation from Nix and Gao's relationship. We have developed an indentation model for micro- and nanoindentation, which accounts for two indenter shapes, a sharp, conical indenter and a conical indenter with a spherical tip. The analysis is based on the conventional theory of mechanism-based strain gradient plasticity established from the Taylor dislocation model to account for the effect of geometrically necessary dislocations. The comparison between numerical result and Feng and Nix's experimental data shows that the indenter tip radius effect indeed causes the deviation from Nix-Gao relation, but it seems not be the main factor. The project supported by the National Natural Science Foundation of China (10121202) and the Ministry of Education of China (20020003023)     

Convenient Synthesis of Phenyl Pyridyl-Ethers Utilizing Fluoride Ion

Aryl pyridyl ethers were prepared from phenols and active halopyridines under essentially neutral condition via fluoride ion assisted reaction.     

Determination of PF‐04620110, a novel inhibitor of diacylglycerol acyltransferase‐1, in rat plasma using liquid chromatography–tandem mass spectrometry and its application in pharmacokinetic studies

In this study, we developed a method for the determination of PF‐04620110 (2‐{(1r,4r)‐4‐[4‐(4‐amino‐5‐oxo‐7,8‐dihydropyrimido[5,4‐f][1,4]oxazepin‐6(5H)‐yl)phenyl]cyclohexyl}acetic acid), a novel diacylglycerol acyltransferase 1 (DGAT‐1) inhibitor, in rat plasma and validated it using liquid chromatography–tandem mass spectrometry (LC‐MS/MS). Rat plasma samples were processed following a protein precipitation method by using acetonitrile and were then injected into an LC‐MS/MS system for quantification. PF‐04620110 and imipramine (internal standard) were separated using a Hypersil Gold C₁₈ column, with a mixture of acetonitrile and 10 mm ammonium formate (90:10, v/v) as the mobile phase. The ion transitions monitored in positive‐ion mode [M + H]⁺ of multiple‐reaction monitoring were m/z 397.0 → 260.2 for PF‐04620110 and m/z 280.8 → 86.0 for imipramine. The detector response was specific and linear for PF‐04620110 at concentrations within the range 0.05–50 µg/mL and the signal‐to‐noise ratios for the samples were ≥10. The intra‐ and inter‐day precision and accuracy of the method matched the acceptance criteria for assay validation. PF‐04620110 was stable under various processing and/or handling conditions. PF‐04620110 concentrations in the rat plasma samples could be measured up to 24 h after intravenous or oral administration of PF‐04620110, suggesting that the assay is useful for pharmacokinetic studies in rats. Copyright © 2013 John Wiley & Sons, Ltd.     

Deposition of a Continuous and Conformal Copper Seed Layer by a Large-Area Electron Cyclotron Resonance Plasma Source with Embedded Lisitano Antenna

To deposit copper seed layer on ultra large scale integration devices, a large-area (Ø 378 mm) electron cyclotron resonance plasma has been generated by using permanent magnets-embedded Lisitano antenna. The plasma source operates in the pressure range of 0.2–1.5 mTorr with microwave power range of 500–2,000 W. By using a Langmuir probe, the electron density and temperature have been measured near the DC sputter target position. Measurements indicate argon plasmas having electron densities of ~5 × 10¹⁰/cm and electron temperatures of 5 eV with 750 W microwave power at gas pressures of 0.5 mTorr. Using this plasma source and a DC sputter, we obtained excellent conformal copper seed layer with high aspect ratios of 12:1. This is in contrast with conventional methods using magnetron sputter, which has aspect ratios of 2–3:1. Also, improvements are observed in the smoothness (root mean square roughness of 1.345 nm), uniformity (2.5 % at 300 mm wafer), and sidewall symmetricity (more than 95 %) of the copper seed layer.     

Photovoltaic devices using semiconducting polymers containing head‐to‐tail‐structured bithiophene,pyrene, and benzothiadiazole derivatives

An alternating copolymer composed of heal‐to‐tail‐structured 3,4′‐dihexyl‐2,2′‐bithiophene (DHBT) and pyrene units [poly(DHBT‐alt‐PYR)] was synthesized using a Stille coupling reaction for use in photovoltaic devices as a p‐type donor. For the reduction of the bandgap energy of poly(DHBT‐alt‐PYR), 4,7‐bis(3′‐hexyl‐2,2′‐bithiophen‐5‐yl)benzo[c][1,2,5]thiadiazole (BHBTBT) units were introduced into the polymer. Poly(DHBT‐co‐PYR‐co‐BHBTBT)s were synthesized using the same polymerization reaction. The synthesized polymers were soluble in common organic solvents and formed smooth thin films after spin casting. The optical bandgap energies of the polymers were obtained from the onset absorption wavelengths. The measured optical bandgap energy of poly(DHBT‐alt‐PYR) was 2.47 eV. As the BHBTBT content in the ter‐polymers increased, the optical bandgap energies of the resulting polymers decreased. The bandgap energies of poly(50DHBT‐co‐40PYR‐co‐10BHBTBT) and poly(50DHBT‐co‐20PYR‐co‐30BHBTBT) were 1.84 and 1.73 eV, respectively. Photovoltaic devices were fabricated with a typical sandwich structure of ITO/PEDOT:PSS/active layer/LiF/Al using the polymers as electron donors and [6,6]‐phenyl C₇₁‐butyric acid methyl ester as the electron acceptor. The device using poly(50DHBT‐co‐20PYR‐co‐30BHBTBT) showed the best performance among the fabricated devices, with an open‐circuit voltage, short‐circuit current, fill factor, and maximum power conversion efficiency of 0.68 V, 5.54 mA/cm², 0.35, and 1.31%, respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

An Efficient Quantum Private Comparison of Equality over Collective-Noise Channels

This article proposes a collective-noise resistant QPC protocol with the help of an almostdishonest third party (TP) who may try to perform any sort of attacks to derive participants’ private secrets except colluding with any participant. The proposed scheme has some considerable advantages over the state-of-the-art QPC protocols over collective-noise channels, where it does not require any pre-shared key between the participants (Alice and Bob). Nevertheless, the proposed scheme can resist Trojan horse attacks without consuming half of the transmitted qubits and any additional equipment (wavelength filter and PNS) support. As a consequence, the proposed QPC protocol can guarantee higher qubit efficiency as compared to the others over collective noise channels.