Synthesis and Application of Epoxidized Natural Rubber

Abstract

North Vietnamese NR latexes were successfully epoxidized using peracetic acid at moderate temperature and pH range. The epoxide contents of pure epoxidized natural rubber (ENR) are from 5 to 70 mol%. The ENR products were characterized and determined by spectral and thermal analysis besides the chemical titration. Conditions of longlasting or excessive temperature, or high acidic pH led to side ring opened products, proved easily by IR, ¹H-NMR, and DSC analysis. The ENR were vulcanized using a semiefficient system. The epoxidation increased the adhesion between rubber and tire cord and metal. This effect becomes stronger beyond 25 mol% and tends to be limited at over 60 mol%. The ENRs were used to formulate special-purpose adhesives. The shear strength of the adhesive ranges from 32 to 45 kg/cm² for bonding rubber to nylon and rubber to metal, respectively.     

Copper-catalyzed aerobic oxidative dehydrogenation for conversion of 2-(alkylthio)-1,4-dihydropyrimidines to 2-(alkylthio)pyrimidines

A simple and efficient aerobic oxidative dehydrogenation reaction method for the conversion of 2-(alkylthio)-1,4-dihydropyrimidines to 2-(alkylthio)pyrimidines using copper catalyst with no additives, such as an oxidant, acid, or base, has been developed. The reaction was successful with a wide range of 2-(alkylthio)-1,4-dihydropyrimidine substrates.     

A pure reentrant cholesteric phase

Abstract

An optically active derivative of p-cyanobiphenyl exhibits a stable reentrant cholesteric phase with the seuqnce: K N?S_A N?I.     

Orbits in a stochastic Goodwin–Lotka–Volterra model

This paper examines the cycling behavior of a deterministic and a stochastic version of the economic interpretation of the Lotka–Volterra model, the Goodwin model. We provide a characterization of orbits in the deterministic highly non-linear model. We then study a stochastic version, with Brownian noise introduced via a heterogeneous productivity factor. Existence conditions for a solution to the system are provided. We prove that the system produces cycles around a unique equilibrium point in finite time for general volatility levels, using stochastic Lyapunov techniques for recurrent domains. Numerical insights are provided.     

New Series Exhibiting Pure Enantiotropic Nematic Reentrant Compounds at Atmospheric Pressure

Some derivatives of an homologous series of 4-aIkoxy-benzoyloxy-4′-cyanotolanes are synthesized. Two of them exhibit a stable nematic reentrant phase at atmospheric pressure.     

Estimation of radon and thoron caused dose at exraction and processing sites of mineral sand mining area in Vietnam (HA TINH province)

Mineral sands are mined in several countries to supply to the titanium and zircon producing industries. Coastal black mineral sands usually contain, besides ilmenite (FeTiO₃) and rutile (TiO₂), radioactive minerals such as zircon (ZrSiO₄) and monazite (RePO₄). Radon and thoron activity concentration originated from natural radioactive contents of the black mineral sand was monitored at the extraction and processing for black minerals in the coastal areas of Ha Tinh Province, one of the around 40 coastal mineral sand deposits in Vietnam. The survey was carried out with the Raduet chambers made by Radosys Ltd—Hungary. The obtained results for 25 investigated points show that the measured values are not high in the residential houses and in case of the sand extraction site as well. At the titanium processing plant the measured values were higher than outside the facility (Radon: 18–55 Bq/m³ with average of 34 Bq/³ and Thoron 33–118 Bq/m³ with average of 58 Bq/m³) but still comparable to the average concentration of the world published by UNSCEAR. The typical outdoor levels of radon and thoron gas are each of the order of 10 Bq/m³. Although the radon concentrations were low in the zircon and titanium processing plants, the thoron concentrations in the houses for separating rutile and zircon were very high. At zircon processing factory, the thoron concentration could reach 2,931 Bq/m³ and the estimated annual effective dose would be 21.4 mSv/a. Intervention has to be taken in order to reduce the thoron level in this factory since the level of thoron and its progenies corresponding to an annual occupational effective dose is beyond the action level of 6 mSv/a.     

Book Review

Abstract

A Guide to Organophosphorus Chemistry, by Louis D. Quin, an internationally recognized authority, published by John Wiley and Sons (http://www.wiley.com/chemistry) ISBN 0-471-31824-8, $94.95, 394pp.

Aminophosphonic and Aminophosphinic Acids: Chemistry and Biological Activity. Editors: Valery P. Kukhar (Ukrainian Academy of Sciences) and Harry R Hudson (University of North London). Published by John Wiley and Sons Ltd., Chichester, UK, on 31 March, 2000. ISBN 0 471-89149-5, 175.00 Pounds sterling, 634 pages.

Phosphorus Ylides. Chemistry and Application in Organic Synthesis, by Oleg I. Kolodiazhnyi. Published by Wiley-VCH, 1999, ISBN 3-527-29531-3, 220SF, 555 pages.     

Reinforcement of Natural Rubber from Hydroxyl-Terminated Liquid Natural Rubber Grafted Carbon Black. I. Grafting of Acyl Chloride Capped Liquid Natural Rubber onto Carbon Black

Abstract

This paper deals with the grafting of acyl chloride capped liquid natural rubber (LNR–COCl) onto carbon black by the reaction of the acyl chloride group with the phenolic hydroxyl group on the surface. LNR–COCl was prepared by the reaction of hydroxyl-terminated liquid natural rubber (HTNR) with adipoyl dichloride. The percentage of grafting was estimated to be 18–21% depending on the grafting temperature and the molecular weight of HTNR used. It increased with an increase in the molecular weight of LNR–COCl. The LNR grafted onto carbon black was investigated by IR spectroscopy and by hydrolysis with a dilute THF solution of KOH. It was shown that LNR grafted onto the carbon black surface with ester bonds.     

Synthesis and characterization of thermotropic amphiphilic liquid crystals: semiperfluoroalkyl-β-D-glucopyranosides

As part of our study of the mesomorphic properties of glucopyranosides containing fluorinated chains, this paper focuses on an investigation of the liquid crystalline behaviour of nonaromatic compounds. The synthesis of eight single-tailed materials which contain a semiperfluoroalkyl chain linked to the polar glucose head group is described. Using polarized optical microscopy, DSC and X-ray diffraction all the materials were found to show only monomesomorphism, a smectic A phase with bimolecular layers. The thermal behaviour is discussed in comparison with the previously reported data on the series of parent compounds.