对排球普修课扣球教学中两种起跳方法的分析

本文在对排球普修课扣球技术采用不同起跳方法的教学基础上，对实验组、对照组助跑摸高成绩进行了比较分析，认为在对初学者扣球起跳技术的教学中，应以并步起跳为宜．掌握了并步起跳技术以后，再向学生介绍跨步起跳技术．     

聚合物分散液晶光栅的衍射特性的研究

报道了一种由聚合物分散液晶膜与具有周期性条状电极结构板结合的新型光栅器件，借助于聚合物分散液晶膜的电光特性，这种栅对入射光的散射或衍射取决于对其施加的电压，即它是电场可调的，实验结果显示出当驱动电压超过器件器件阈值电压时，衍射光的强度和衍射斑的可见级次被电场调制，而且它能入射光的线性偏振态变为椭圆偏振态。     

图的度序列不等式

用代数的方法证明了有关图度序列的几个不等式，并且得到了其相应的极图。     

四个麦芽品质性状的杂种优势和相关分析

本文对四个主要麦芽品质性状—a一淀粉酶活力、麦芽汁粘度、麦芽汁色度和搪化力进行了杂种优势和相关分析.(1)相对优势结果表明，在84个组合次中，呈正向优势的46个，占54.76男，负向优势34个，占40.48男，无显性4个，占4.75男;(2)四个品质性状的中亲优势平均值分别为一6.117、一9.965 40.452和一。.545s a-淀粉酶活力和糖化力的超高亲优势分别为一14.578和一8.201,麦芽汁粘度和色度的超低亲优势分别为5.442和70.455.四个性状杂种优势的变异系数均很大.(3)麦芽汁色度的F，对MP的回归系数(B)和相关系数(r)均达显著水平，分别为。..43和0.50，麦芽汁粘度的相关系数达显著水平，为一。.45,其余均未达显著水平，(4)除麦芽汁色度性状外，另三个性状的中亲优势、超亲优势和特殊配合力的相关均达显著或极显著水平.(5)四个麦芽品质性状间的相关结果表明，仅有a-淀粉酶活力和麦芽汁粘度间呈极显著负相关(r=一0.56').最后，文章根据实验结果，就啤酒大麦麦芽品质改良的遗传育种及其杂种优势应用进行了初步讨论.     

超短脉冲激光微束对细胞作用的研究

本文详细地介绍了我们自己设计和安装的一个Nd:YAG超短脉冲激光微束系统,该系统分成二个部分:激光源和显微镜。由电光调Q非稳腔Nd:YAG激光倍频后得到355nm紫外光进入显微镜并由物镜聚焦。同时,这超短脉冲激光微束照射在细胞上并且在细胞上产生一个可以自恢复的小孔。在文中我们还讨论了超短脉冲激光微束与细胞之间作用效应及机理。     

集成电路高精度高速度在线电阻检测

本文提出的具有粗、精测双回路的测试系统,可兼顾电阻在线检测过程中的高精度与高速度问题。该系统各器件间的信息交换满足IEEE-488标准。     

自体静脉移植血管的拉伸实验研究

本文考察了自体移植静脉的纵向应力应变关系。将狗股静脉移植于股动脉，在术后不同时间切取移植静脉进行纵向单轴拉伸实验。结果表明，移植静脉的应力－应变曲线比正常静脉靠近应力坐标轴并在术后逐渐向左移动。这显示了移植血管管壁组织在术后的逐渐硬化。     

Diffusion via splitting and remeshing via merging in vortex methods

The technique of splitting a fat vortex element (with a core width larger than some threshold) into some thin ones in order to fix the convergence problem of the core‐spreading vortex methods is convenient and efficient. In particular, it keeps the method purely Lagrangian. In the present investigation, the splitting process is further viewed as part of the physical diffusion process. A new splitting method in which several weaker child vortices surround a thinned but still strong parent vortex is proposed. It is found that because of the survival of the parent vortex, the error arising from the splitting events can be largely reduced. The computational amount on the other hand is kept reasonably large by merging similar and close‐by vortices. The merging scheme designed herein not only involves fewer restrictions but also allows merging vortices of opposite rotations through the viewpoint of remeshing. The validity and accuracy of these techniques, proposed particularly for simulations undergoing lots of splitting and merging events, are verified by successfully simulating the interactions between two Burgers vortices under an external straining field. Copyright © 2005 John Wiley & Sons, Ltd.     

Isolation and Structure Elucidation of Nortriterpenoids from Schisandra rubriflora

Seven new highly oxygenated nortriterpenoids, rubriflorins D–J ( 1 – 7 ), were isolated from the leaves and stems of Schisandra rubriflora, and their structures were elucidated on the basis of extensive analysis of spectroscopic data. These new compounds feature the opening of ring A compared with related known nortriterpenoids isolated from the genus Schisandra and showed weak activity against HIV‐1.     

吹气孔直径对RH精炼过程钢液流动和混合特性的影响

针对90t RH精炼装置,以水力学模拟研究了吹气孔直径对真空循环精炼过程中钢液流动和混合特性的影响.模型和原型的相似比为15.模型吹气孔直径分别为0.8 mm和1.2 mm.结果表明,1.2 mm孔径下环流量和主要工艺参数间的关系为Ql Q80.26Du0.69Dd0.80;在给定的吹气量和插入管内径下,增大吹气孔直径并不显著改变精炼过程中钢液流动特征,环流量随吹气孔直径的增大而略有增大,其关系式为Ql=2.40Q 0.23gD0.72u D0.88d d0.13in;相应地,混合时间稍有缩短;0.8和1.2 mm孔径下,τm与搅拌能密度的关系分别为τm ε5和τm ε0.49.