meso‐Ester and Carboxylic Acid Substituted BODIPYs with Far‐Red and Near‐Infrared Emission for Bioimaging Applications

A series of meso‐ester‐substituted BODIPY derivatives 1–6 are synthesized and characterized. In particular, dyes functionalized with oligo(ethylene glycol) ether styryl or naphthalene vinylene groups at the α positions of the BODIPY core ( 3 – 6 ) become partially soluble in water, and their absorptions and emissions are located in the far‐red or near‐infrared region. Three synthetic approaches are attempted to access the meso‐carboxylic acid (COOH)‐substituted BODIPYs 7 and 8 from the meso‐ester‐substituted BODIPYs. Two feasible synthetic routes are developed successfully, including one short route with only three steps. The meso‐COOH‐substituted BODIPY 7 is completely soluble in pure water, and its fluorescence maximum reaches around 650 nm with a fluorescence quantum yield of up to 15 %. Time‐dependent density functional theory calculations are conducted to understand the structure–optical properties relationship, and it is revealed that the Stokes shift is dependent mainly on the geometric change from the ground state to the first excited singlet state. Furthermore, cell staining tests demonstrate that the meso‐ester‐substituted BODIPYs ( 1 and 3 – 6 ) and one of the meso‐COOH‐substituted BODIPYs ( 8 ) are very membrane‐permeable. These features make these meso‐ester‐ and meso‐COOH‐substituted BODIPY dyes attractive for bioimaging and biolabeling applications in living cells.     

Photochemically Engineering the Metal–Semiconductor Interface for Room‐Temperature Transfer Hydrogenation of Nitroarenes with Formic Acid

A mild photochemical approach was applied to construct highly coupled metal–semiconductor dyads, which were found to efficiently facilitate the hydrogenation of nitrobenzene. Aniline was produced in excellent yield (>99 %, TOF: 1183) using formic acid as hydrogen source and water as solvent at room temperature. This general and green catalytic process is applicable to a wide range of nitroarenes without the involvement of high‐pressure gases or sacrificial additives.     

Cube‐in‐Cube Hollow Cu9S5 Nanostructures with Enhanced Photocatalytic Activities in Solar H2 Evolution

Hydrogen produced from water under solar energy is an ideal clean energy source, and the efficiency of hydrogen production usually depends on the catalytic systems based on new compounds and/or a unique nanostructure. Herein, well‐defined cube‐in‐cube hollow Cu₉S₅ nanostructures have been successfully prepared with Cu₂O nanocubes and CS₂ as precursors, and single‐shell hollow Cu₉S₅ nanocubes could be obtained by replacing CS₂ with Na₂S. The formation mechanism of cube‐in‐cube hollow nanostructures has been proposed based on the Kirkendell effect and an outward self‐assembly process. Further studies revealed that the cube‐in‐cube hollow Cu₉S₅ nanostructures exhibited better photocatalytic activity toward solar H₂ evolution and would be a promising photocatalyst in the solar hydrogen industry.     

Cerium‐Based M4L4 Tetrahedra as Molecular Flasks for Selective Reaction Prompting and Luminescent Reaction Tracing

The application of metal–organic polyhedra as “molecular flasks” has precipitated a surge of interest in the reactivity and property of molecules within well‐defined spaces. Inspired by the structures of the natural enzymatic pockets, three metal–organic neutral molecular tetrahedral, Ce‐TTS, Ce‐TNS and Ce‐TBS (H₆TTS: N′,N′′,N′′′‐nitrilotris‐4,4′,4′′‐(2‐hydroxybenzylidene)‐benzohydrazide; H₆TNS: N′,N′′,N′′′‐nitrilotris‐6,6′,6′′‐(2‐hydroxybenzylidene)‐2‐naphthohydrazide; H₆TBS: 1,3,5‐ phenyltris ‐4,4′,4′′‐(2‐hydroxybenzylidene)benzohydrazide), which exhibit different size of the edges and cavities, were achieved through self‐assembly by incorporating robust amide‐containing tridentate chelating sites into the fragments of the ligands. They acted as molecular flasks to prompt the cyanosilylation of aldehydes with excellent selectivity towards the substrates size. The amide groups worked as trigger sites and catalytic driven forces to achieve efficient guest interactions, enforcing the substrates proximity within the cavity. Experiments on catalysts with the different cavity radii and substrates with the different molecular size demonstrated that the catalytic performance exhibited enzymatical catalytic mechanism and occurred in the molecular flask. These amides were also able to amplify guest‐bonding events into the measurable outputs for the detection of concentration variations of the substrates, providing the possibility for metal–organic hosts to work as smart molecular flasks for the luminescent tracing of catalytic reactions.     

Efficient Copper‐Catalyzed Direct Intramolecular Aminotrifluoromethylation of Unactivated Alkenes with Diverse Nitrogen‐Based Nucleophiles

A mild, convenient, and step‐economical intramolecular aminotrifluoromethylation of unactivated alkenes with a variety of electronically distinct, nitrogen‐based nucleophiles in the presence of a simple copper salt catalyst, in the absence of extra ligands, is described. Many different nitrogen‐based nucleophiles (e.g., basic primary aliphatic and aromatic amines, sulfonamides, carbamates, and ureas) can be employed in this new aminotrifluoromethylation reaction. The aminotrifluoromethylation process allows straightforward access to diversely substituted CF₃‐containing pyrrolidines or indolines, in good to excellent yields, through a direct difunctionalization strategy from the respective acyclic starting materials. Mechanistic studies were conducted and a plausible mechanism was proposed.     

Copper‐Catalyzed One‐Pot Denitrogenative–Dehydrogenative–Decarboxylative Coupling of β‐Ketoacids with Trifluorodiazoethane: Facile Access to Trifluoromethylated Aldol Products

A novel copper‐catalyzed one‐pot cross‐coupling of β‐ketoacids with in situ generated trifluorodiazoethane has been developed. This reaction provides a direct and efficient method, in which one C?C bond and one C?O bond were formed in a carbenoid center with concomitant denitrogenation–dehydrogenation–decarboxylation, to afford trifluoromethylated aldol products. In several preliminary experiments, good to high enantioselectivities were also obtained.     

陕南茶叶稀土元素产地特征研究

为了掌握陕南茶叶中稀土元素含量和分布状况,并利用稀土元素对茶叶产地进行判别,采用ICP-MS法对陕南地区44个茶叶样品中16种稀土元素进行了测定。结果表明:茶叶中不同稀土元素含量差异较大,其中La,Ce,Nd含量较高,平均含量分别为124.81,172.13,87.20μg·kg-1;茶叶样品中稀土氧化物含量范围为200.32~1558.35μg·kg-1,总体上呈东高西低趋势,且均低于国家规定限量;茶叶中稀土元素随地域变化表现出不同分布特征,但具有相似的丰度模式;利用主成分分析将茶叶稀土元素归结为轻稀土组和重稀土组,间接地证明轻稀土元素和重稀土元素在从土壤到茶叶迁移过程中仍存在着差异;聚类分析结果表明,稀土元素可作为陕南茶叶产地判别的重要指标。     

Time‐Resolved Assembly of Cluster‐in‐Cluster {Ag12}‐in‐{W76} Polyoxometalates under Supramolecular Control

We report the time‐resolved supramolecular assembly of a series of nanoscale polyoxometalate clusters (from the same one‐pot reaction) of the form: [H_(10+m)Ag₁₈Cl(Te₃W₃₈O₁₃₄)₂]_n, where n=1 and m=0 for compound 1 (after 4 days), n=2 and m=3 for compound 2 (after 10 days), and n=∞ and m=5 for compound 3 (after 14 days). The reaction is based upon the self‐organization of two {Te₃W₃₈} units around a single chloride template and the formation of a {Ag₁₂} cluster, giving a {Ag₁₂}‐in‐{W₇₆} cluster‐in‐cluster in compound 1 , which further aggregates to cluster compounds 2 and 3 by supramolecular Ag‐POM interactions. The proposed mechanism for the formation of the clusters has been studied by ESI‐MS. Further, control experiments demonstrate the crucial role that TeO₃^2?, Cl^?, and Ag⁺ play in the self‐assembly of compounds 1 – 3 .     

Highly Enantioselective Kinetic Resolution of Axially Chiral BINAM Derivatives Catalyzed by a Brønsted Acid

A highly efficient strategy for the kinetic resolution of axially chiral BINAM derivatives involving a chiral Brønsted acid‐catalyzed imine formation and transfer hydrogenation cascade process was developed. The kinetic resolution provides a convenient route to chiral BINAM derivatives in high yields with excellent enantioselectivities.     

Control of Three‐Dimensional Cell Adhesion by the Chirality of Nanofibers in Hydrogels

In the three‐dimensional (3D) extracellular matrix (ECM), the influence of nanofiber chirality on cell behavior is very important; the helical nanofibrous structure is closely related to the relevant biological events. Herein, we describe the use of the two enantiomers of a 1,4‐benzenedicarboxamide phenylalanine derivative as supramolecular gelators to investigate the influence of the chirality of nanofibers on cell adhesion and proliferation in three dimensions. It was found that left‐handed helical nanofibers can increase cell adhesion and proliferation, whereas right‐handed nanofibers have the opposite effect. These effects are ascribed to the mediation of the stereospecific interaction between chiral nanofibers and fibronectin. The results stress the crucial role of the chirality of nanofibers on cell‐adhesion and cell‐proliferation behavior in 3D environments.